DC-DC Converter SIP-Package DAE-3 SERIES, 3WATT, 1.5KVDC, UNREGULATED FEATURES: 1500Vdc isolation voltage High efficiency Operating temperature range -40 ℃ to +85 ℃ Short circuit protection 3 year warranty Model DAE3-0511 DAE3-0512 DAE3-0513 DAE3-0514 DAE3-0515 DAE3-1211 DAE3-1212 DAE3-1213 DAE3-1214 DAE3-1215 DAE3-1511 DAE3-1512 DAE3-1513 DAE3-1514 DAE3-1515 DAE3-2411 DAE3-2412 DAE3-2413 DAE3-2414 DAE3-2415 Input voltage (Vdc) Output voltage (Vdc) 5(4.5~5.5) 12(10.8~13.2) 15(13.5~16.5) 24(21.6-26.4) Output current (mA) Efficiency Typ. Min. Max. 5 60 600 80% 9 33.3 333 82% 12 25 250 83% 15 20 200 83% 24 12.5 125 81% 5 60 600 80% 9 33.3 333 82% 12 25 250 83% 15 20 200 83% 24 12.5 125 78% 5 60 600 80% 9 33.3 333 81% 12 25 250 81% 15 20 200 83% 24 12.5 125 78% 5 60 600 80% 9 33.3 333 82% 12 25 250 84% 15 20 200 85% 24 12.5 125 84% Notes: 1. Other input and output models may available on request; 2. Add suffix “P” for continuous short circuit protection. ELECTRICAL Line regulation --- Load regulation 10% ~ 100% full load Isolation voltage Leakage current < 1mA/1min. 1500Vdc min. Isolation resistance Test at 500VDC 1000m Switching frequency --- www.pairuigroup.com 1.5% max. 15%max. Ω min. 100KHz typ. Page: 1/3 Date: 11/23/2015 * Subject to change without prior notice DC-DC Converter SIP-Package DAE-3 SERIES, 3WATT, 1.5KVDC, UNREGULATED ELECTRICAL Ripple & noise Bend width 20MHz 100mVp-p max. Temperature coefficient Rated load Operating temperature range --- Storage temperature range --- ℃ to +85℃ -55℃ to +125℃ Short circuit protection --- 1S MTBF --- 3500KHrs Weight --- 2.7g ±0.03%/℃ -40 Notes: All the parameters are measured at 25℃ ambient temperature, humidity < 75%, nominal input voltage, full load and after warm-up, unless otherwise specified. MECHANICAL CONNECTION PIN # SINGLE 1 +Vin 2 GND 4 0V 5 No Pin 6 +Vo Note: * Unit is mm(inch). TEMPERATURE PROFILE www.pairuigroup.com Page: 2/3 Date: 11/23/2015 * Subject to change without prior notice DC-DC Converter SIP-Package DAE-3 SERIES, 3WATT, 1.5KVDC, UNREGULATED NOTES RECOMMENDED TEST AND APPLICATION CIRCUIT CAPACITOR SELECTION INPUT VOLTAGE C1 OUTPUT VOLTAGE C2 5VDC 4.7μF 5VDC 4.7μF 12VDC 2.2μF 9VDC 2.2μF 15VDC 2.2μF 12VDC 1.0μF 24VDC 1.0μF 15VDC 1.0μF -- -- 24VDC 0.47μF www.pairuigroup.com Page: 3/3 Date: 11/23/2015 * Subject to change without prior notice