NTB6412AN, NTP6412AN, NVB6412AN N-Channel Power MOSFET 100 V, 58 A, 18.2 mW Features • • • • • Low RDS(on) High Current Capability 100% Avalanche Tested NVB Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP Capable These Devices are Pb−Free and are RoHS Compliant www.onsemi.com V(BR)DSS 100 V N−Channel D Symbol Value Unit Drain−to−Source Voltage VDSS 100 V Gate−to−Source Voltage − Continuous VGS $20 V ID 58 A Continuous Drain Current RqJC Steady State Power Dissipation RqJC Steady State TC = 25°C TC = 100°C S 167 W IDM 240 A TJ, Tstg −55 to +175 °C IS 58 A Single Pulse Drain−to−Source Avalanche Energy (VDD = 50 Vdc, VGS = 10 Vdc, IL(pk) = 44.7 A, L = 0.3 mH, RG = 25 W) EAS 300 mJ Lead Temperature for Soldering Purposes, 1/8″ from Case for 10 Seconds TL tp = 10 ms Operating Junction and Storage Temperature Range Source Current (Body Diode) G 41 PD Pulsed Drain Current TC = 25°C 4 4 1 2 3 1 2 3 4 Drain Symbol Max Unit Junction−to−Case (Drain) Steady State RqJC 0.9 °C/W Junction−to−Ambient (Note 1) RqJA 33 Stresses exceeding those listed in the Maximum Ratings table may damage the device. If any of these limits are exceeded, device functionality should not be assumed, damage may occur and reliability may be affected. 1. Surface mounted on FR4 board using 1 sq in pad size, (Cu Area 1.127 sq in [2 oz] including traces). D2PAK CASE 418B STYLE 2 TO−220AB CASE 221A STYLE 5 °C 260 THERMAL RESISTANCE RATINGS Parameter 58 A 18.2 mW @ 10 V MAXIMUM RATINGS (TJ = 25°C Unless otherwise specified) Parameter ID MAX (Note 1) RDS(ON) MAX MARKING DIAGRAM & PIN ASSIGNMENT 4 Drain NTB 6412ANG AYWW NTP 6412ANG AYWW 1 Gate 3 Source 2 Drain 1 Gate 2 Drain 3 Source 6412AN = Specific Device Code G = Pb−Free Device A = Assembly Location Y = Year WW = Work Week ORDERING INFORMATION See detailed ordering and shipping information in the package dimensions section on page 5 of this data sheet. © Semiconductor Components Industries, LLC, 2015 January, 2015 − Rev. 2 1 Publication Order Number: NTB6412AN/D NTB6412AN, NTP6412AN, NVB6412AN ELECTRICAL CHARACTERISTICS (TJ = 25°C Unless otherwise specified) Characteristics Symbol Test Condition Min V(BR)DSS VGS = 0 V, ID = 250 mA 100 Typ Max Unit OFF CHARACTERISTICS Drain−to−Source Breakdown Voltage Drain−to−Source Breakdown Voltage Temperature Coefficient Zero Gate Voltage Drain Current Gate−to−Source Leakage Current V(BR)DSS/TJ IDSS V 103 VGS = 0 V, VDS = 100 V mV/°C TJ = 25°C 1.0 TJ = 125°C 100 IGSS VDS = 0 V, VGS = $20 V VGS(th) VGS = VDS, ID = 250 mA $100 mA nA ON CHARACTERISTICS (Note 2) Gate Threshold Voltage Negative Threshold Temperature Coefficient Drain−to−Source On−Resistance VGS(th)/TJ 4.0 9.2 RDS(on) Forward Transconductance 2.0 gFS V mV/°C VGS = 10 V, ID = 58 A 16.8 18.2 VGS = 10 V, ID = 20 A 15.6 18.2 VDS = 5 V, ID = 20 A 31 mW S CHARGES, CAPACITANCES & GATE RESISTANCE Input Capacitance Ciss Output Capacitance Coss Reverse Transfer Capacitance Crss 150 Total Gate Charge QG(TOT) 73 Threshold Gate Charge QG(TH) VDS = 25 V, VGS = 0 V, f = 1 MHz 2700 3500 400 500 100 pF nC 2.5 VGS = 10 V, VDS = 80 V, ID = 58 A Gate−to−Source Charge QGS 13.5 Gate−to−Drain Charge QGD 35 Plateau Voltage VGP 5.6 V Gate Resistance RG 2.2 W 16 ns SWITCHING CHARACTERISTICS, VGS = 10 V (Note 3) Turn−On Delay Time Rise Time Turn−Off Delay Time Fall Time td(on) tr td(off) VGS = 10 V, VDD = 80 V, ID = 58 A, RG = 6.2 W tf 140 70 126 DRAIN−SOURCE DIODE CHARACTERISTICS Forward Diode Voltage VSD Reverse Recovery Time trr Charge Time ta Discharge Time Reverse Recovery Charge IS = 58 A TJ = 25°C 0.96 TJ = 125°C 0.89 85 VGS = 0 V, IS = 58 A, dISD/dt = 100 A/ms tb QRR www.onsemi.com 2 V ns 60 25 270 2. Pulse Test: Pulse Width ≤ 300 ms, Duty Cycle ≤ 2%. 3. Switching characteristics are independent of operating junction temperatures. 1.3 nC NTB6412AN, NTP6412AN, NVB6412AN 120 120 7.5 V 100 6.5 V ID, DRAIN CURRENT (A) ID, DRAIN CURRENT (A) TJ = 25°C 10 V 80 6.0 V 60 5.4 V 40 5.0 V 20 VDS w 10 V 100 80 60 40 20 VGS = 4.4 V TJ = −55°C 0 1 2 3 4 5 2 4 5 6 7 VDS, DRAIN−TO−SOURCE VOLTAGE (V) Figure 1. On−Region Characteristics Figure 2. Transfer Characteristics 0.04 ID = 58 A TJ = 25°C 0.03 0.02 0.01 5 6 7 8 9 10 VGS, GATE−TO−SOURCE VOLTAGE (V) 8 0.06 VGS = 10 V 0.05 TJ = 175°C 0.04 TJ = 125°C 0.03 0.02 TJ = 25°C TJ = −55°C 0.01 0 10 20 30 40 50 60 ID, DRAIN CURRENT (A) Figure 3. On−Region versus Gate Voltage Figure 4. On−Resistance versus Drain Current and Gate Voltage 3 100000 VGS = 0 V ID = 58 A VGS = 10 V IDSS, LEAKAGE (nA) RDS(on), DRAIN−TO−SOURCE RESISTANCE (NORMALIZED) 3 VGS, GATE−TO−SOURCE VOLTAGE (V) RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) RDS(on), DRAIN−TO−SOURCE RESISTANCE (W) 0 0 2.5 TJ = 25°C TJ = 125°C 2 1.5 10000 TJ = 150°C TJ = 125°C 1000 1 0.5 −50 100 −25 0 25 50 75 100 125 150 175 10 20 30 40 50 60 70 80 90 100 TJ, JUNCTION TEMPERATURE (°C) VDS, DRAIN−TO−SOURCE VOLTAGE (V) Figure 5. On−Resistance Variation with Temperature Figure 6. Drain−to−Source Leakage Current versus Voltage www.onsemi.com 3 10 VGS, GATE−TO−SOURCE VOLTAGE (V) 5000 C, CAPACITANCE (pF) TJ = 25°C VGS = 0 V 4000 3000 Ciss 2000 1000 0 Coss Crss 0 10 20 30 40 50 60 70 80 90 VDS, DRAIN−TO−SOURCE VOLTAGE (V) 8 VGS VDS 80 Qgd Qgs 6 60 4 40 2 VDS = 80 V ID = 58 A TJ = 25°C 0 100 Figure 7. Capacitance Variation 0 10 20 30 40 50 60 Qg, TOTAL GATE CHARGE (nC) 20 0 70 Figure 8. Gate−to−Source Voltage and Drain−to−Source Voltage versus Total Charge 1000 100 IS, SOURCE CURRENT (A) 60 VDS = 80 V ID = 58 A VGS = 10 V t, TIME (ns) 100 QT VDS, DRAIN−TO−SOURCE VOLTAGE (V) NTB6412AN, NTP6412AN, NVB6412AN tf tr td(off) td(on) 10 1 TJ = 25°C VGS = 0 V 50 40 30 20 10 0 1 10 RG, GATE RESISTANCE (W) 0.5 100 Figure 9. Resistive Switching Time Variation versus Gate Resistance 0.6 0.7 0.8 0.9 VSD, SOURCE−TO−DRAIN VOLTAGE (V) 1.0 Figure 10. Diode Forward Voltage versus Current 1000 300 100 AVALANCHE ENERGY (mJ) ID, DRAIN CURRENT (A) ID = 44.7 A 10 ms 100 ms 10 1 ms 10 ms dc 1 RDS(on) LIMIT THERMAL LIMIT PACKAGE LIMIT VGS = 10 V SINGLE PULSE TC = 25°C 10 100 VDS, DRAIN−TO−SOURCE VOLTAGE (V) 100 0 0.1 1 200 1000 25 Figure 11. Maximum Rated Forward Biased Safe Operating Area 50 75 100 125 150 TJ, STARTING JUNCTION TEMPERATURE 175 Figure 12. Maximum Avalanche Energy versus Starting Junction Temperature www.onsemi.com 4 NTB6412AN, NTP6412AN, NVB6412AN 1 D = 0.5 0.2 R(t) (°C/W) 0.1 0.1 0.05 0.02 0.01 0.01 0.001 0.000001 SINGLE PULSE 0.00001 0.0001 0.001 0.01 0.1 t, PULSE TIME (s) 1 10 100 1000 Figure 13. Thermal Response ORDERING INFORMATION Package Shipping† NTB6412ANG D2PAK (Pb−Free) 50 Units / Rail NTB6412ANT4G D2PAK (Pb−Free) 800 / Tape & Reel NTP6412ANG TO−220 (Pb−Free) 50 Units / Rail NVB6412ANT4G D2PAK (Pb−Free) 800 / Tape & Reel Device †For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging Specifications Brochure, BRD8011/D. www.onsemi.com 5 NTB6412AN, NTP6412AN, NVB6412AN PACKAGE DIMENSIONS D2PAK 3 CASE 418B−04 ISSUE K NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. 418B−01 THRU 418B−03 OBSOLETE, NEW STANDARD 418B−04. C E V W −B− 4 DIM A B C D E F G H J K L M N P R S V A 1 2 S 3 −T− SEATING PLANE K W J G D 3 PL 0.13 (0.005) VARIABLE CONFIGURATION ZONE H M T B M N R M STYLE 2: PIN 1. GATE 2. DRAIN 3. SOURCE 4. DRAIN P U L L L M M F F F VIEW W−W 1 VIEW W−W 2 VIEW W−W 3 SOLDERING FOOTPRINT* 10.49 8.38 16.155 2X 3.504 2X 1.016 5.080 PITCH DIMENSIONS: MILLIMETERS *For additional information on our Pb−Free strategy and soldering details, please download the ON Semiconductor Soldering and Mounting Techniques Reference Manual, SOLDERRM/D. www.onsemi.com 6 INCHES MIN MAX 0.340 0.380 0.380 0.405 0.160 0.190 0.020 0.035 0.045 0.055 0.310 0.350 0.100 BSC 0.080 0.110 0.018 0.025 0.090 0.110 0.052 0.072 0.280 0.320 0.197 REF 0.079 REF 0.039 REF 0.575 0.625 0.045 0.055 MILLIMETERS MIN MAX 8.64 9.65 9.65 10.29 4.06 4.83 0.51 0.89 1.14 1.40 7.87 8.89 2.54 BSC 2.03 2.79 0.46 0.64 2.29 2.79 1.32 1.83 7.11 8.13 5.00 REF 2.00 REF 0.99 REF 14.60 15.88 1.14 1.40 NTB6412AN, NTP6412AN, NVB6412AN PACKAGE DIMENSIONS TO−220 CASE 221A−09 ISSUE AH −T− B SEATING PLANE C F T S 4 DIM A B C D F G H J K L N Q R S T U V Z A Q 1 2 3 U H K Z L R V NOTES: 1. DIMENSIONING AND TOLERANCING PER ANSI Y14.5M, 1982. 2. CONTROLLING DIMENSION: INCH. 3. DIMENSION Z DEFINES A ZONE WHERE ALL BODY AND LEAD IRREGULARITIES ARE ALLOWED. J G D N INCHES MIN MAX 0.570 0.620 0.380 0.415 0.160 0.190 0.025 0.038 0.142 0.161 0.095 0.105 0.110 0.161 0.014 0.024 0.500 0.562 0.045 0.060 0.190 0.210 0.100 0.120 0.080 0.110 0.045 0.055 0.235 0.255 0.000 0.050 0.045 ----0.080 STYLE 5: PIN 1. 2. 3. 4. MILLIMETERS MIN MAX 14.48 15.75 9.66 10.53 4.07 4.83 0.64 0.96 3.61 4.09 2.42 2.66 2.80 4.10 0.36 0.61 12.70 14.27 1.15 1.52 4.83 5.33 2.54 3.04 2.04 2.79 1.15 1.39 5.97 6.47 0.00 1.27 1.15 ----2.04 GATE DRAIN SOURCE DRAIN ON Semiconductor and are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner. PUBLICATION ORDERING INFORMATION LITERATURE FULFILLMENT: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada Email: [email protected] N. American Technical Support: 800−282−9855 Toll Free USA/Canada Europe, Middle East and Africa Technical Support: Phone: 421 33 790 2910 Japan Customer Focus Center Phone: 81−3−5817−1050 www.onsemi.com 7 ON Semiconductor Website: www.onsemi.com Order Literature: http://www.onsemi.com/orderlit For additional information, please contact your local Sales Representative NTB6412AN/D