Plastic Film Capacitors Stacked Metallized PPS Film Chip Capacitor Type: ECHU(X) Stacked metallized PPS film as dielectric with simple mold-less construction ■Features • Small in size (minimum size 1.6 mm ✕ 0.8 mm) • 85 ˚C, 85 %RH, W.V. ✕ 1.0 for 500 hours • For reflow soldering • RoHS directive compliant ■Recommended Applications • Time-constant • Filtering • Oscillation and resonance ■Explanation of Part Numbers 1 2 3 4 E C H U Product code Dielectric & construction 5 6 7 8 9 10 11 X Rated voltage Capacitance Cap. Tol. Suffix G ±2 % J ±5 % 01 10 VDC 1C 16 VDC 1H 50 VDC ■Specifications Category temp. range (Including temperature-rise on unit surface) Rated voltage 12 Tape width Reel diameter ❈ Tape width 8 mm and diameter 8 mm 5 size ø180 mm ø330 mm reel is prepared. 12 mm 9 size ø330 mm −55 ℃ to ＋125 ℃ 10 VDC，16 VDC，50 VDC (50 VDC: 0.12 µF or more: Derating or rated voltage by 1.25 % / ℃at more than 105 ℃) Capacitance range 0.00010 µF to 0.22 µF (E12) Capacitance tolerance ±2 %(G), ±5 %(J) Withstand voltage Between terminals : Rated volt. (VDC)✕150 % 60 s Dissipation factor (tan ) tanδ≦0.6 % (20 ℃, 1 kHz) Insulation resistance (IR) Soldering conditions Suffix 10 VDC：IR≧3000 MΩ (20 ℃, 10 VDC, 60 s) 16 VDC：IR≧3000 MΩ (20 ℃, 10 VDC, 60 s) 50 VDC：IR≧3000 MΩ (20 ℃, 50 VDC, 60 s) Reflow soldering : 260 ˚C max. and 95 sec max. at more than 220 ˚C (Temp. at cap. surface) ❈ Please consult us for flow soldering ❈ In case of applying voltage in alternating current (50 Hz or 60 Hz sine wave) to a capacitor with DC rated voltage, please refer to the page of “Permissible voltage (R.M.S) in alternating current corresponding to DC rated voltage”. ■Construction ■Dimensions in mm (not to scale) saize code L W H e g K1 1.6 0.8 0.7 0.35 ≧0.4 J1 J2 H1 2.0 2.0 3.2 1.25 1.25 1.6 0.9 1.1 0.9 0.45 0.45 0.65 ≧0.6 ≧0.6 ≧1.0 H2 H3 3.2 3.2 1.6 1.6 1.1 1.5 0.65 0.65 ≧1.0 ≧1.0 G1 G2 G3 3.2 3.2 3.2 2.5 2.5 2.5 1.1 1.5 2.1 0.65 0.65 0.65 ≧1.0 ≧1.0 ≧1.0 E1 E2 4.8 4.8 3.3 3.3 1.5 2.1 0.80 0.80 ≧2.0 ≧2.0 D1 D3 D4 6.0 6.0 6.0 4.1 4.1 4.1 1.9 2.5 2.8 0.80 0.80 0.80 ≧2.0 ≧2.0 ≧2.0 Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. Plastic Film Capacitors ■Taping Specification for Automatic Mounting Refer to the page of taping specifications ■Rating, Dimensions & Quantity/Reel ●Capacitance tolerance : ±2 % (G), ±5 % (J) Rated volt. 16 VDC Cap. (µF) 0.00010 0.00012 0.00015 0.00018 0.00022 0.00027 0.00033 0.00039 0.00047 0.00056 0.00068 0.00082 0.0010 0.0012 0.0015 0.0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 0.12 0.15 0.18 0.22 Part No. ECHU1C101□X5 ECHU1C121□X5 ECHU1C151□X5 ECHU1C181□X5 ECHU1C221□X5 ECHU1C271□X5 ECHU1C331□X5 ECHU1C391□X5 ECHU1C471□X5 ECHU1C561□X5 ECHU1C681□X5 ECHU1C821□X5 ECHU1C102□X5 ECHU1C122□X5 ECHU1C152□X5 ECHU1C182□X5 ECHU1C222□X5 ECHU1C272□X5 ECHU1C332□X5 ECHU1C392□X5 ECHU1C472□X5 ECHU1C562□X5 ECHU1C682□X5 ECHU1C822□X5 ECHU1C103□X5 ECHU1C123□X5 ECHU1C153□X5 ECHU1C183□X5 ECHU1C223□X5 ECHU1C273□X5 ECHU1C333□X5 ECHU1C393□X5 ECHU1C473□X5 ECHU1C563□X5 ECHU1C683□X5 ECHU1C823□X5 ECHU1C104□X5 ↑ Dimensions (mm) L 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.0 2.0 2.0 2.0 2.0 2.0 2.0 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 W 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 0.8 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.6 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.5 2.5 2.5 2.5 H 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.7 0.9 0.9 0.9 0.9 0.9 1.1 1.1 0.9 0.9 0.9 0.9 1.1 1.1 1.5 1.5 1.5 1.5 2.1 2.1 Rated volt. 50 VDC Size Code K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 K1 J1 J1 J1 J1 J1 J2 J2 H1 H1 H1 H1 H2 H2 H3 H3 G2 G2 G3 G3 Q'ty Part No. ECHU1H101□X5 ECHU1H121□X5 ECHU1H151□X5 ECHU1H181□X5 ECHU1H221□X5 ECHU1H271□X5 ECHU1H331□X5 ECHU1H391□X5 4000 ECHU1H471□X5 ECHU1H561□X5 ECHU1H681□X5 ECHU1H821□X5 ECHU1H102□X5 ECHU1H122□X5 ECHU1H152□X5 ECHU1H182□X5 ECHU1H222□X5 ECHU1H272□X5 ECHU1H332□X5 ECHU1H392□X5 ECHU1H472□X5 ECHU1H562□X5 ECHU1H682□X5 ECHU1H822□X5 3000 ECHU1H103□X5 ECHU1H123□X5 ECHU1H153□X5 ECHU1H183□X5 ECHU1H223□X5 ECHU1H273□X5 ECHU1H333□X5 ECHU1H393□X5 ECHU1H473□X9 2000 ECHU1H563□X9 ECHU1H683□X9 ECHU1H823□X9 ECHU1H104□X9 ECHU1H124□X9 ECHU1H154□X9 ECHU1H184□X9 ECHU1H224□X9 ↑ Dimensions (mm) L 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 3.2 4.8 4.8 4.8 4.8 4.8 6.0 6.0 6.0 6.0 Cap. tol. code Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail. W 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.6 1.6 1.6 1.6 1.6 1.6 1.6 2.5 2.5 2.5 2.5 2.5 2.5 2.5 3.3 3.3 3.3 3.3 3.3 4.1 4.1 4.1 4.1 H 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 0.9 1.1 1.1 1.1 1.1 1.5 1.5 1.5 2.1 2.1 1.5 1.5 1.5 2.1 2.1 1.9 1.9 2.5 2.8 Size Code J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 J1 H1 H1 H1 H1 H1 H2 H2 G1 G1 G2 G2 G2 G3 G3 E1 E1 E1 E2 E2 D1 D1 D3 D4 Q'ty 3000 2000 3000 2000 Plastic Film Capacitors ■Rating, Dimensions & Quantity/Reel ●Capacitance tolerance : ±2 % (G), ±5 % (J) Rated volt. 10 VDC Cap. (µF) 0.00010 0.00012 0.00015 0.00018 0.00022 0.00027 0.00033 0.00039 0.00047 0.00056 0.00068 0.00082 0.0010 0.0012 0.0015 0,0018 0.0022 0.0027 0.0033 0.0039 0.0047 0.0056 0.0068 0.0082 0.010 0.012 0.015 0.018 0.022 0.027 0.033 0.039 0.047 0.056 0.068 0.082 0.10 Dimensions (mm) Part No. L W H Size Code Q'ty Please use 16 VDC rating of ECHU(X) ECHU01332MX5 ECHU01392MX5 ECHU01472MX5 ECHU01562MX5 ECHU01682MX5 ECHU01822MX5 ECHU01103MX5 ECHU01123MX5 ECHU01153MX5 ECHU01183MX5 ECHU01223MX5 ECHU01273MX5 ▲ 1.6 1.6 1.6 1.6 2.0 2.0 2.0 2.0 2.0 2.0 2.0 2.0 0.8 0.8 0.8 0.8 1.25 1.25 1.25 1.25 1.25 1.25 1.25 1.25 0.7 0.7 0.7 0.7 0.9 0.9 0.9 0.9 0.9 0.9 1.1 1.1 K1 K1 K1 K1 J1 J1 J1 J1 J1 J1 J2 J2 4000 3000 Please use 16 VDC rating of ECHU(X) Cap. tol. code ■Recommended for Land Dimensions (mm) Land dimensions Size Code Reflow soldering A K1 J1,J2 H1,H2,H3 G1,G2,G3 E1,E2 D1,D3,D4 0.6 0.8 1.8 1.8 3.0 4.0 B C 2.0 2.4 3.6 3.6 5.6 7.0 0.7 1.1 1.4 2.3 3.0 3.8 ❈ It is not warrantable that you can mount the capacitor without trouble under all the mounting condition when “Recommender for Land dimensions” is adopted. Design, Specifications are subject to change without notice. Ask factory for technical specifications before purchase and/or use. Whenever a doubt about safety arises from this product, please inform us immediately for technical consultation without fail.