GP16A01F THRU GP16A07F Glass Passivated Standard Rectifier Voltage Range 50 to 1000 V Current 16.0 Ampere Features Low forward voltage drop High current capability Low reverse leakage current High surge current capability Mechanical Data Case: Molded plastic ITO-220AC Epoxy: UL 94V-0 rate flame retardant Terminals: Solderable per MIL-STD-202 method 208 Polarity:As marked on the body Mounting position: Any Weight: 2.07 grams ITO-220AC .185(4.70) .175(4.44) .113(2.87).412(10.5) .103(2.62) MAX 1.25(3.18) .140(3.56) DIA 1.15(2.92) .130(3.30) PIN 1 .16(4.06) .14(3.56) .594(15.1) .587(14.9) 2 .56(14.22) .53(13.46) .037(0.94) .027(0.68) .205(5.20) .195(4.95) .27(6.86) .23(5.84) YENYO .11(2.79) .10(2.54) .025(0.64) .014(0.35) 1 2 Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load, derate current by 20%. GP GP GP GP GP GP GP SYMBOL 16A01F 16A02F 16A03F 16A04F 16A05F 16A06F 16A07F UNIT PARAMTER Maximum Recurrent Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V VDC 50 100 200 400 600 800 1000 V Maximum DC Blocking Voltage Maximum Average Forward Rectified o Current TC=100 C I(AV) 16.0 A IFSM 300 A VF 1.1 V 10.0 uA 250 uA pF Peak Forward Surge Current, 8.3ms single Half sine-wave superimposed on rated load (JEDEC method) Maximum Instantaneous Forward Voltage @ 16.0 A o Maximum DC Reverse Current @TJ=25 C o At Rated DC Blocking Voltage @TJ=125 C IR Typical junction Capacitance (Note 1) CJ 100 TJ,TSTG -65 to +150 Operating Junction and Storage Temperature Range o NOTES : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 Volts DC. 1/2 R2, MAY-12 C RATINGS AND CHARACTERISTIC CURVES GP16A01F THRU GP16A07F FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT FIG.1 - FORWARD CURRENT DERATING CURVE 300 PEAK FORWARD SURGE CURRENT, AMPERES AVERAGE FORWARD RECTIFIED CURRENT, AMPERES 16.0 12.0 8.0 4.0 60 Hz Resistive or Inductive load 0 Pulse Width 8.3ms Single Half-Sire-Wave (JEDEC Method) 250 200 150 100 50 0 0 50 100 150 1 100 NUMBER OF CYCLES AT 60Hz o CASE TEMPERATURE, C FIG.3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS 100 INSTANTANEOUS REVERSE CURRENT, MICROAMPERES 100 10 o TJ=25 C PULSE WIDTH=300uS 1% DUTY CYCLE 1 0.6 0.8 1.0 1.2 1.4 1.6 1.8 o TJ=125 C 10 1 o TJ=25 C 0.1 2.0 0 INSTANTANEOUS FORWARD VOLTAGE, VOLTS 20 40 60 80 100 PERCENT OF RATED PEAK REVERSE VOLTAGE,% FIG.5 - TYPICAL JUNCTION CAPACITANCE 1000 JUNCTION CAPACITANCE, pF IINSTANTANEOUS FORWARD CURRENT, AMPERES 10 o TJ = 25 C f = 1.0 MHZ Vsig = 50mVp-p 100 10 0.1 1.0 4.0 10 100 REVERSE VOLTAGE, VOLTS YENYO TECHNOLOGY CO., LTD. 1/2 R2, MAY-12