ON ESD7371XV2T1G Ultra-low capacitance esd protection Datasheet

ESD7371,
SZESD7371 Series
Ultra-Low Capacitance ESD
Protection
http://onsemi.com
MARKING
DIAGRAMS
2
1
Features
•
•
•
•
•
•
•
•
•
SOD−323
CASE 477
2
Industry Leading Capacitance Linearity Over Voltage
Low Capacitance (0.7 pF Max, I/O to GND)
Stand−off Voltage: 5.3 V
Low Leakage: < 1 nA
Low Dynamic Resistance < 1 W
IEC61000−4−2 Level 4 ESD Protection
1000 ESD IEC61000−4−2 Strikes ±8 kV Contact / Air Discharged
SZ Prefix for Automotive and Other Applications Requiring Unique
Site and Control Change Requirements; AEC−Q101 Qualified and
PPAP Capable
These Devices are Pb−Free, Halogen Free/BFR Free and are RoHS
Compliant
SOD−523
CASE 502
1
AG
M
AG
1
2
SOD−923
CASE 514AB
X, XX
M
M
The ESD7371 Series is designed to protect voltage sensitive
components that require ultra−low capacitance from ESD and
transient voltage events. Excellent clamping capability, low
capacitance, high breakdown voltage, high linearity, low leakage, and
fast response time make these parts ideal for ESD protection on
designs where board space is at a premium. It has industry leading
capacitance linearity over voltage making it ideal for RF applications.
This capacitance linearity combined with the extremely small package
and low insertion loss makes this part well suited for use in antenna
line applications for wireless handsets and terminals.
AE M
= Specific Device Code
= Date Code
PIN CONFIGURATION
AND SCHEMATIC
Typical Applications
•
•
•
•
1
Cathode
RF Signal ESD Protection
RF Switching, PA, and Antenna ESD Protection
Near Field Communications
USB 2.0, USB 3.0
ORDERING INFORMATION
MAXIMUM RATINGS (TA = 25°C unless otherwise noted)
Rating
Symbol
IEC 61000−4−2 (ESD) (Note 1)
IEC 61000−4−5 (ESD) (Note 2)
Total Power Dissipation (Note 3) @ TA = 25°C
Thermal Resistance, Junction−to−Ambient
Junction and Storage Temperature Range
Lead Solder Temperature − Maximum
(10 Second Duration)
2
Anode
Value
Unit
20
kV
3.0
A
°PD°
RqJA
300
400
mW
°C/W
TJ, Tstg
−55 to
+150
°C
TL
260
°C
See detailed ordering and shipping information in the package
dimensions section on page 5 of this data sheet.
Stresses exceeding those listed in the Maximum Ratings table may damage the
device. If any of these limits are exceeded, device functionality should not be
assumed, damage may occur and reliability may be affected.
1. Non−repetitive current pulse at TA = 25°C, per IEC61000−4−2 waveform.
2. Non−repetitive current pulse at TA = 25°C, per IEC61000−4−5 waveform.
3. Mounted with recommended minimum pad size, DC board FR−4
See Application Note AND8308/D for further description of survivability specs.
© Semiconductor Components Industries, LLC, 2014
September, 2014 − Rev. 1
1
Publication Order Number:
ESD7371/D
ESD7371, SZESD7371 Series
ELECTRICAL CHARACTERISTICS
I
(TA = 25°C unless otherwise noted)
IF
Parameter
Symbol
IPP
Maximum Reverse Peak Pulse Current
VC
Clamping Voltage @ IPP
VRWM
IR
VBR
IT
VC VBR VRWM
Working Peak Reverse Voltage
V
IR VF
IT
Maximum Reverse Leakage Current @ VRWM
Breakdown Voltage @ IT
Test Current
*See Application Note AND8308/D for detailed explanations of
datasheet parameters.
IPP
Uni−Directional TVS
ELECTRICAL CHARACTERISTICS (TA = 25°C unless otherwise specified)
Parameter
Reverse Working Voltage
Breakdown Voltage (Note 4)
Symbol
Conditions
Min
Typ
Max
Unit
5.3
V
< 1.0
50
nA
VRWM
VBR
IT = 1 mA
7.0
V
Reverse Leakage Current
IR
VRWM = 5.3 V
Clamping Voltage (Note 5)
VC
IPP = 1 A
11
15
V
Clamping Voltage (Note 5)
VC
IPP = 3 A
14
20
V
Junction Capacitance
CJ
VR = 0 V, f = 1 MHz
VR = 0 V, f < 1 GHz
0.43
0.39
0.7
0.7
pF
Dynamic Resistance
RDYN
TLP Pulse
0.45
W
Product parametric performance is indicated in the Electrical Characteristics for the listed test conditions, unless otherwise noted. Product
performance may not be indicated by the Electrical Characteristics if operated under different conditions.
4. Breakdown voltage is tested from pin 1 to 2 and pin 2 to 1.
5. Non−repetitive current pulse at TA = 25°C, per IEC61000−4−5 waveform.
http://onsemi.com
2
ESD7371, SZESD7371 Series
1
1.E−04
0.9
1.E−05
0.8
CAPACITANCE (pF)
1.E−03
1.E−06
I (A)
1.E−07
1.E−08
1.E−09
0.7
0.6
0.5
0.4
0.3
1.E−10
0.2
1.E−11
0.1
1.E−12
0
1
2
3
4
5
6
7
8
9
0
10 11 12
0
1
2
V (V)
4
5
6
Vbias (V)
Figure 1. IV Characteristics
Figure 2. CV Characteristics
2
2.0
0
1.8
1.6
CAPACITANCE (pF)
−2
−4
−6
dB
3
−8
−10
1.4
1.2
1.0
0.8
0.6
0.4
−12
0.2
−14
1E8
1E9
2E10
1E10
0.0
0.5
1.5
2.5
FREQUENCY (Hz)
4.5
5.5
6.5
7.5
8.5
9.5
FREQUENCY
Figure 3. RF Insertion Loss
Figure 4. Capacitance over Frequency
−16
8
16
8
10
4
8
6
2
4
EQUIVALENT VIEC (kV)
TLP CURRENT (A)
6
12
−12
6
−10
−8
4
−6
−4
2
−2
2
0
0
2
4
6
8
10 12
VOLTAGE (V)
14
16
18
0
0
20
0
Figure 5. Positive TLP I−V Curve
2
4
6
8
10 12
VOLTAGE (V)
14
16
Figure 6. Negative TLP I−V Curve
http://onsemi.com
3
18
0
20
EQUIVALENT VIEC (kV)
−14
14
TLP CURRENT (A)
3.5
ESD7371, SZESD7371 Series
IEC61000−4−2 Waveform
IEC 61000−4−2 Spec.
Ipeak
Level
Test Voltage (kV)
First Peak
Current
(A)
Current at
30 ns (A)
Current at
60 ns (A)
1
2
7.5
4
2
2
4
15
8
4
3
6
22.5
12
6
4
8
30
16
8
100%
90%
I @ 30 ns
I @ 60 ns
10%
tP = 0.7 ns to 1 ns
Figure 7. IEC61000−4−2 Spec
ESD Gun
Oscilloscope
TVS
50 W
Cable
50 W
Figure 8. Diagram of ESD Clamping Voltage Test Setup
The following is taken from Application Note
AND8308/D − Interpretation of Datasheet Parameters
for ESD Devices.
from a 100 ns long rectangular pulse from a charged
transmission line. A simplified schematic of a typical TLP
system is shown in Figure 9. TLP I−V curves of ESD
protection devices accurately demonstrate the product’s
ESD capability because the 10s of amps current levels and
under 100 ns time scale match those of an ESD event. This
is illustrated in Figure 10 where an 8 kV IEC 61000−4−2
current waveform is compared with TLP current pulses at
8 A and 16 A. A TLP I−V curve shows the voltage at which
the device turns on as well as how well the device clamps
voltage over a range of current levels.
ESD Voltage Clamping
For sensitive circuit elements it is important to limit the
voltage that an IC will be exposed to during an ESD event
to as low a voltage as possible. The ESD clamping voltage
is the voltage drop across the ESD protection diode during
an ESD event per the IEC61000−4−2 waveform. Since the
IEC61000−4−2 was written as a pass/fail spec for larger
systems such as cell phones or laptop computers it is not
clearly defined in the spec how to specify a clamping voltage
at the device level. ON Semiconductor has developed a way
to examine the entire voltage waveform across the ESD
protection diode over the time domain of an ESD pulse in the
form of an oscilloscope screenshot, which can be found on
the datasheets for all ESD protection diodes. For more
information on how ON Semiconductor creates these
screenshots and how to interpret them please refer to
AND8307/D.
L
S Attenuator
÷
50 W Coax
Cable
10 MW
IM
50 W Coax
Cable
VM
DUT
VC
Oscilloscope
Transmission Line Pulse (TLP) Measurement
Transmission Line Pulse (TLP) provides current versus
voltage (I−V) curves in which each data point is obtained
Figure 9. Simplified Schematic of a Typical TLP
System
http://onsemi.com
4
ESD7371, SZESD7371 Series
Figure 10. Comparison Between 8 kV IEC 61000−4−2 and 8 A and 16 A TLP Waveforms
ORDERING INFORMATION
Package
Shipping†
ESD7371HT1G,
SZESD7371HT1G*
SOD−323
(Pb−Free)
3000 / Tape & Reel
ESD7371XV2T1G,
SZESD7371XV2T1G*
SOD−523
(Pb−Free)
3000 / Tape & Reel
ESD7371P2T5G,
SZESD7371P2T5G*
SOD−923
(Pb−Free)
8000 / Tape & Reel
Device
†For information on tape and reel specifications, including part orientation and tape sizes, please refer to our Tape and Reel Packaging
Specifications Brochure, BRD8011/D.
*SZ Prefix for Automotive and Other Applications Requiring Unique Site and Control Change Requirements; AEC−Q101 Qualified and PPAP
Capable.
http://onsemi.com
5
ESD7371, SZESD7371 Series
PACKAGE DIMENSIONS
SOD−323
CASE 477−02
ISSUE H
NOTES:
1. DIMENSIONING AND TOLERANCING PER ANSI
Y14.5M, 1982.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. LEAD THICKNESS SPECIFIED PER L/F DRAWING
WITH SOLDER PLATING.
4. DIMENSIONS A AND B DO NOT INCLUDE MOLD
FLASH, PROTRUSIONS OR GATE BURRS.
5. DIMENSION L IS MEASURED FROM END OF RADIUS.
HE
D
b
1
2
E
MILLIMETERS
DIM MIN
NOM MAX
A
0.80
0.90
1.00
A1 0.00
0.05
0.10
A3
0.15 REF
b
0.25
0.32
0.4
C 0.089
0.12 0.177
D
1.60
1.70
1.80
E
1.15
1.25
1.35
L
0.08
HE
2.30
2.50
2.70
A3
A
C
NOTE 3
L
NOTE 5
A1
SOLDERING FOOTPRINT*
0.63
0.025
0.83
0.033
1.60
0.063
2.85
0.112
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
6
INCHES
NOM MAX
0.035 0.040
0.002 0.004
0.006 REF
0.010 0.012 0.016
0.003 0.005 0.007
0.062 0.066 0.070
0.045 0.049 0.053
0.003
0.090 0.098 0.105
MIN
0.031
0.000
ESD7371, SZESD7371 Series
PACKAGE DIMENSIONS
SOD−523
CASE 502
ISSUE E
−X−
D
NOTES:
6. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
7. CONTROLLING DIMENSION: MILLIMETERS.
8. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH.
MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF
BASE MATERIAL.
9. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS.
−Y−
E
2X
b
0.08
1
M
2
X Y
DIM
A
b
c
D
E
HE
L
L2
TOP VIEW
A
c
HE
RECOMMENDED
SOLDERING FOOTPRINT*
SIDE VIEW
2X
2X
0.48
L
L2
BOTTOM VIEW
1.80
2X
0.40
PACKAGE
OUTLINE
2X
MILLIMETERS
MIN
NOM
MAX
0.50
0.60
0.70
0.25
0.30
0.35
0.07
0.14
0.20
1.10
1.20
1.30
0.70
0.80
0.90
1.50
1.60
1.70
0.30 REF
0.15
0.20
0.25
DIMENSION: MILLIMETERS
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
http://onsemi.com
7
ESD7371, SZESD7371 Series
PACKAGE DIMENSIONS
SOD−923
CASE 514AB
ISSUE C
NOTES:
1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994.
2. CONTROLLING DIMENSION: MILLIMETERS.
3. MAXIMUM LEAD THICKNESS INCLUDES LEAD FINISH.
MINIMUM LEAD THICKNESS IS THE MINIMUM THICKNESS OF
BASE MATERIAL.
4. DIMENSIONS D AND E DO NOT INCLUDE MOLD FLASH, PROTRUSIONS, OR GATE BURRS.
−X−
D
−Y−
E
1
2X b
0.08 X Y
2
DIM
A
b
c
D
E
HE
L
L2
TOP VIEW
A
c
MILLIMETERS
MIN
NOM MAX
0.34
0.37
0.40
0.15
0.20
0.25
0.07
0.12
0.17
0.75
0.80
0.85
0.55
0.60
0.65
0.95
1.00
1.05
0.19 REF
0.05
0.10
0.15
SOLDERING FOOTPRINT*
HE
SIDE VIEW
1.20
2X
2X
2X
0.36
L
PACKAGE
OUTLINE
2X
INCHES
MIN
NOM MAX
0.013 0.015 0.016
0.006 0.008 0.010
0.003 0.005 0.007
0.030 0.031 0.033
0.022 0.024 0.026
0.037 0.039 0.041
0.007 REF
0.002 0.004 0.006
L2
0.25
DIMENSIONS: MILLIMETERS
See Application Note AND8455/D for more mounting details
BOTTOM VIEW
*For additional information on our Pb−Free strategy and soldering
details, please download the ON Semiconductor Soldering and
Mounting Techniques Reference Manual, SOLDERRM/D.
ON Semiconductor and
are registered trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC owns the rights to a number of patents, trademarks,
copyrights, trade secrets, and other intellectual property. A listing of SCILLC’s product/patent coverage may be accessed at www.onsemi.com/site/pdf/Patent−Marking.pdf. SCILLC
reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any
particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without
limitation special, consequential or incidental damages. “Typical” parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications
and actual performance may vary over time. All operating parameters, including “Typicals” must be validated for each customer application by customer’s technical experts. SCILLC
does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for
surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where
personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and
its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly,
any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture
of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. This literature is subject to all applicable copyright laws and is not for resale in any manner.
PUBLICATION ORDERING INFORMATION
LITERATURE FULFILLMENT:
Literature Distribution Center for ON Semiconductor
P.O. Box 5163, Denver, Colorado 80217 USA
Phone: 303−675−2175 or 800−344−3860 Toll Free USA/Canada
Fax: 303−675−2176 or 800−344−3867 Toll Free USA/Canada
Email: [email protected]
N. American Technical Support: 800−282−9855 Toll Free
USA/Canada
Europe, Middle East and Africa Technical Support:
Phone: 421 33 790 2910
Japan Customer Focus Center
Phone: 81−3−5817−1050
http://onsemi.com
8
ON Semiconductor Website: www.onsemi.com
Order Literature: http://www.onsemi.com/orderlit
For additional information, please contact your local
Sales Representative
ESD7371/D
Similar pages