LUXEON UV Superior Flux Density, Efficiency and Design Freedom – in the Industry’s Only Micro-Package UV LED Introduction At 1/5 the size of other ultraviolet and violet LEDs, LUXEON® UV is the industry’s smallest footprint high-power emitter. LUXEON UV LEDs can be assembled in tight arrays with spacing of only 200 microns, which enables highest power density (W/cm2) systems. The product delivers superior efficiency, undomed for precise optical control, and a portfolio covering ultraviolet (380400nm) and violet (400-430nm) light. Features Benefits Key Applications • 2.2mm2 micro footprint • 1A max drive current • AlN substrate • Up to 45+% wall plug efficiency • Undomed • Industry’s highest array W/cm2 • More flux per LED • Rth as low as 3.5 K/W • Less heat to manage • Precise optical control • Curing • Specialty Lighting • Security/Forensic • Scientific LUXEON UV DS114 ©2013 Philips Lumileds Lighting Company. Table of Contents General Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Test Conditions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Product Nomenclature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Safety . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Radiant Flux Characteristics, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Other Characteristics, . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Absolute Maximum Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Mechanical Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 Solder Pad Design . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 JEDEC Moisture Sensitivity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Reflow Soldering Characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Typical Characteristic Curves . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Typical Radiation Patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 Flux and Wavelength Bin Availability . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11 Emitter Pocket Tape Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12 Emitter Reel Packaging . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 LUXEON UV Datasheet DS114 20130925 ©2013 Philips Lumileds Lighting Company. i General Information Test Conditions LUXEON UV emitters are specified and binned at 500 mA, 20ms monopulse, and junction temperature of 25°C. Product Nomenclature The part number designation for LUXEON UV is as follows: L H UV – a B B B – c D D D Where: a — open slot to accommodate additional requirements per product and part number. a is 0 by default BBB — designates beginning of 5nm wavelength bin (for example, 395 for 395-400nm) c — open slot to accommodate additional requirements per product and part number. c is 0 by default DDD — designates minimum radiometric power in mW (for example, 500 for 500mW) Safety WARNING: Some LUXEON UV products emit ultraviolet light (<400nm). Do not look at operating LEDs. Eye injury may result. Use necessary skin and eye protection. Assume IEC62471 Risk Group 3. LUXEON UV Datasheet DS114 20130925 ©2013 Philips Lumileds Lighting Company. 2 Radiant Flux Characteristics, TJ = 25°C Table 1. Wavelength Bin [1] Typ Radiometric Power [2], mW Part Number 380-385nm LHUV-0380-0150 LHUV-0380-0200 LHUV-0380-0250 LHUV-0380-0300 500 mA 175 225 275 325 385-390nm LHUV-0385-0200 LHUV-0385-0250 LHUV-0385-0300 LHUV-0385-0350 225 275 325 375 470 570 675 780 15 18 22 25 390-395nm LHUV-0390-0300 LHUV-0390-0350 LHUV-0390-0400 LHUV-0390-0450 330 375 425 470 695 790 900 1000 22 25 28 32 395-400nm LHUV-0395-0350 LHUV-0395-0400 LHUV-0395-0450 LHUV-0395-0500 375 425 475 525 765 870 970 1075 25 28 31 35 400-405nm LHUV-0400-0400 LHUV-0400-0450 LHUV-0400-0500 435 475 525 875 960 1055 28 31 34 405-410nm LHUV-0405-0500 LHUV-0405-0550 LHUV-0405-0600 LHUV-0405-0650 525 575 625 675 1005 1100 1195 1295 35 38 41 45 410-415nm LHUV-0410-0500 LHUV-0410-0550 LHUV-0410-0600 LHUV-0410-0650 525 575 625 675 985 1080 1160 1255 35 38 41 45 415-420nm LHUV-0415-0550 LHUV-0415-0600 LHUV-0415-0650 575 625 675 1070 1160 1250 39 42 46 LHUV-0420-0550 LHUV-0420-0600 LHUV-0420-0650 LHUV-0425-0550 LHUV-0425-0600 LHUV-0425-0650 575 625 675 575 625 675 1060 1150 1245 1070 1165 1260 39 42 46 39 42 46 420-425nm 425-430nm 1000 mA 370 475 580 685 Max Wall-Plug Efficiency, % 12 15 18 21 Notes for Table 1: 1. Philips Lumileds maintains a tolerance of ± 2nm for peak wavelength measurements. 2. Philips Lumileds maintains a tolerance of ± 10% for radiometric power measurements. LUXEON UV Datasheet DS114 20130925 ©2013 Philips Lumileds Lighting Company. 3 Other Characteristics, TJ=25°C, Test Current = 500 mA Table 2. Forward Voltage, V Wavelength Bin [1] Part Number 380-385nm Typical Spectral Half-width, nm [2] Dλ1/2 Typical Viewing Angle, degrees [3] 2u1/2 Thermal Resistance Rth, [4] °C/W Minimum Typical Maximum LHUV-0380 2.5 3.2 3.5 9 125 6 385-390nm LHUV-0385 2.5 3.1 3.5 10 125 6 390-395nm LHUV-0390 2.5 3.1 3.5 10 125 5 395-400nm LHUV-0395 2.5 3.1 3.5 11 125 4.5 400-405nm LHUV-0400 2.5 3.1 3.5 11 125 4.5 405-410nm LHUV-0405 2.5 3.0 3.5 12 125 4.5 410-415nm LHUV-0410 2.5 3.0 3.5 13 125 4 415-420nm LHUV-0415 2.5 3.0 3.5 14 125 3.5 420-425nm LHUV-0420 2.5 3.0 3.5 14 125 3.5 425-430nm LHUV-0425 2.5 3.0 3.5 14 125 3.5 Notes for Table 2: 1. Philips Lumileds maintains a tolerance of ± 2nm for peak wavelength measurements. 2. Spectral width at ½ of the peak intensity. 3. Viewing angle is the off axis angle from lamp centerline where the radiometric power intensity is ½ of the peak value. 4. Rth between junction and electrode pads. Absolute Maximum Ratings Table 3. Condition Absolute Maximum Rating Forward Current (mA) Junction Temperature [1] 1000 mA 135°C ESD Sensitivity Class 3B 8kV HBM JEDEC JS-001-2012 Operating Temperature -40°C – 135°C Storage Temperature -40°C – 135°C Reverse Voltage LUXEON UV LEDs are not designed to be driven in reverse bias. Notes for Table 3: 1. Proper current derating must be observed to maintain junction temperature below the maximum. Maximum junction temperature dependant on wavelegnth bin and drive current. See AB114 for derating curve. LUXEON UV Datasheet DS114 20130925 ©2013 Philips Lumileds Lighting Company. 4 Mechanical Dimensions DIE CENTER 0.68±0.15 0.65 0.40 0.25 0.62 0.95 1.50 1.70±0.15 CATHODE MARKER DIE OUTLINE 0.95 1.30±0.15 SILICONE OVERMOLD 0.44 CERAMIC 1.05 Figure 1. Package outline drawing. Notes for Figure 1: 1. All dimensions are in millimeters. 2. To avoid damage, do not manually exert force to the top surface. See AB114 for handling precautions. 3. Drawings not to scale. Solder Pad Design Figure 2. Solder pad layout. Notes for Figure 2: 1. All dimensions are in millimeters. LUXEON UV Datasheet DS114 20130925 ©2013 Philips Lumileds Lighting Company. 5 JEDEC Moisture Sensitivity Table 4. Level 1 Soak Requirements Standard Floor Life Time Conditions Time Conditions unlimited [ 30°C / 85% RH 168h +5/-0 85°C / 85% RH Reflow Soldering Characteristics Figure 3. Reflow soldering conditions. Table 5. Profile Feature Lead Free Assembly Average Ramp-Up Rate (Tsmax to Tp) 3°C / second max Preheat Temperature Min (Tsmin) 150°C Preheat Temperature Max (Tsmax) 200°C Preheat Time (tsmin to tsmax) 60 - 180 seconds Temperature TL (tL) 217°C Time Maintained Above Temperature TL (tL) 60 - 150 seconds Peak / Classification Temperature (TP) 260°C Time Within 5°C of Actual Peak Temperature (tP) 20 - 40 seconds Ramp-Down Rate 6°C / second max Time 25°C to Peak Temperature 8 minutes max Note for Table 5: • All temperatures refer to the application Printed Circuit Board (PCB), measured on the surface adjacent to the package body. LUXEON UV Datasheet DS114 20130925 ©2013 Philips Lumileds Lighting Company. 6 Typical Characteristic Curves Figure 4. Typical relative radiant flux vs. forward current, Tj = 25°C. Figure 5. Typical relative radiant flux vs. junction temperature, test current = 500 mA. LUXEON UV Datasheet DS114 20130925 ©2013 Philips Lumileds Lighting Company. 7 Figure 6. Typical peak wavelength vs. forward current, Tj = 25°C. Figure 7. Typical peak wavelength vs. junction temperature. LUXEON UV Datasheet DS114 20130925 ©2013 Philips Lumileds Lighting Company. 8 Figure 8. Typical forward current vs. forward voltage, Tj = 25°C. Figure 9. Typical forward voltage vs. junction temperature. LUXEON UV Datasheet DS114 20130925 ©2013 Philips Lumileds Lighting Company. 9 Typical Radiation Patterns Typical Spatial Radiation Pattern Figure 10. Typical spatial radiation pattern. Typical Polar Radiation Pattern Figure 11. Typical polar radiation pattern. LUXEON UV Datasheet DS114 20130925 ©2013 Philips Lumileds Lighting Company. 10 Flux and Wavelength Bin Availability Table 6 highlights standard radiometric power and wavelength bins in grey. Although several bins are outlined, product availability in a particular bin varies by production run. Table 6. Minimum Radiometric Power Wavelength Bin / Part Number 380-385nm 385-390nm 390-395nm 395-400nm 400-405nm 405-410nm 410-415nm 415-420nm 420-425nm 425-430nm LHUV-0380 LHUV-0385 LHUV-0390 LHUV-0395 LHUV-0400 LHUV-0405 LHUV-0410 LHUV-0415 LHUV-0420 LHUV-0425 150mW 200mW 250mW 300mW 350mW 400mW 450mW 500mW 550mW 600mW 650mW Note for Table 6: 1. LUXEON UV LEDs have not been approved for medical applications and are not authorized for use as critical components in medical devices, military systems, life or critical support devices or related systems. Philips Lumileds provides no warranty related to such non-authorized uses. LUXEON UV Datasheet DS114 20130925 ©2013 Philips Lumileds Lighting Company. 11 Emitter Pocket Tape Packaging Figure 12. Emitter pocket tape packaging. Figure 13. Orientation of LEDs inside carrier tape. LUXEON UV Datasheet DS114 20130925 ©2013 Philips Lumileds Lighting Company. 12 Emitter Reel Packaging Figure 14. Emitter reel packaging. LUXEON UV Datasheet DS114 20130925 ©2013 Philips Lumileds Lighting Company. 13 Company Information Philips Lumileds is a leading provider of LEDs for everyday lighting applications. The company’s records for light output, efficacy and thermal management are direct results of the ongoing commitment to advancing solid-state lighting technology and enabling lighting solutions that are more environmentally friendly, help reduce CO2 emissions and reduce the need for power plant expansion. Philips Lumileds LUXEON® LEDs are enabling never before possible applications in outdoor lighting, shop lighting, home lighting, digital imaging, display and automotive lighting. Philips Lumileds is a fully integrated supplier, producing core LED material in all three base colors, (Red, Green, Blue) and white. Philips Lumileds has R&D centers in San Jose, California and in the Netherlands, and production capabilities in San Jose, Singapore and Penang, Malaysia. Founded in 1999, Philips Lumileds is the high flux LED technology leader and is dedicated to bridging the gap between solid-state technology and the lighting world. More information about the company’s LUXEON LED products and solid-state lighting technologies can be found at www.philipslumileds.com. RoHS COMPLIANT Philips Lumileds Lighting Company shall not be liable for any kind of loss of data or any other damages, direct, indirect or consequential, resulting from the use of the provided information and data. Although Philips Lumileds Lighting Company has attempted to provide the most accurate information and data, the materials and services information and data are provided “as is” and Philips Lumileds Lighting Company neither warranties, nor guarantees the contents and correctness of the provided information and data. Philips Lumileds Lighting Company reserves the right to make changes without notice. You as user agree to this disclaimer and user agreement with the download or use of the provided materials, information and data. ©2013 Philips Lumileds Lighting Company. All rights reserved. LUXEON is a registered trademark of the Philips Lumileds Lighting Company in the United States and other countries. www.philipslumileds.com www.philipslumileds.cn.com LUXEON UV Datasheet DS114 20130925