LH SERIES 5-25W, AC-DC CONVERTER LH series ----is a compact size power converter offered by Mornsun. It features universal input voltage, taking both DC and AC input voltage, low power consumption, high efficiency, high reliability, safer isolation. It offers good EMC performance, meets IEC/EN61000-4, CISPR22/EN55022, UL60950 and EN60950 standards, and widely used in industrial, office and civil applications. For harsh EMC environment, this series of products must use the refered application circuit. PRODUCT FEATURES 1.Universal Input :85 ~ 264VAC,50/60Hz 2.Regulated output, low ripple and noise 3.Efficiency up to 85% 4.Over-current, short circuit and over-temperature protection 5.Plastic case, meets UL94V-0 6.Meets：UL60950 and EN60950 7.Three years warranty 8.Mounting:PCB mounting, Chassis mounting with Screw Terminals, DIN-Rail mounting SELECTION GUIDE Approval Model Package Power E235235 LH10-10B24A2 Output (Vo1/Io1) Output (Vo2/Io2) Ripple and Noise(Typ) Efficiency (%)(Typ.) UL/CE LH05-10B03 3.3V/1250mA 70 UL/CE LH05-10B05 5V/1000mA 75 UL/CE LH05-10B09 9V/550mA 77 UL/CE LH05-10B12 12V/420mA 79 UL/CE LH05-10B15 15V/330mA 80 UL/CE LH05-10B24 24V/230mA LH05-10A05 +5V/500mA -5V/500mA 75 LH05-10A12 +12V/210mA -12V/210mA 79 LH05-10A15 +15V/160mA -15V/160mA +24V/100mA -24V/100mA LH05-10A24 4W RoHS PART NUMBER SYSTEM 48.5X36X20.5mm 5W 82 50mV 79 80 LH05-10C0505-01 5V/800mA ±5V/100mA LH05-10C0512-01 5V/600mA ±12V/100mA 73 LH05-10C0515-01 5V/600mA ±15V/80mA 74 LH05-10C0524-01 5V/600mA ±24V/50mA LH05-10D0505-01 5V/900mA 5V/100mA 75 71 LH05-10D0512-01 5V/750mA 12V/100mA 73 LH05-10D0515-01 5V/700mA 15V/100mA 73 LH05-10D0524-01 5V/600mA 24V/100mA 75 6.6 W 70 UL/CE LH10-10B03 3.3V/2000mA 70 UL/CE LH10-10B05 5V/2000mA 76 UL/CE LH10-10B09 9V/1100mA 78 UL/CE LH10-10B12 12V/900mA 80 UL/CE LH10-10B15 15V/700mA 81 UL/CE LH10-10B24 24V/450mA UL/CE UL/CE LH10-10A05 LH10-10A12 +5V/1000mA +12V/450mA -5V/1000mA -12V/450mA UL/CE LH10-10A15 +15V/350mA -15V/350mA 81 UL/CE UL/CE UL/CE UL/CE UL/CE LH10-10A24 LH10-10C0512-02 LH10-10C0515-02 LH10-10D0505-02 LH10-10D0512-02 LH10-10D0515-02 LH10-10D0524-02 +24V/200mA 5V/1000mA 5V/900mA 5V/1800mA 5V/1500mA 5V/1400mA 5V/1000mA -24V/200mA ±12V/200mA ±15V/200mA 5V/200mA 12V/200mA 15V/200mA 24V/200mA 84 75 75 75 79 79 81 UL/CE LH15-10B03 55X45X21.0mm 62X45X22.5mm 10W 9.9W 3.3V/3000mA The copyright and authority for the interpretation of the products are reserved by MORNSUN 82 50mV 50mV 76 80 73 Specifications subject to change without notice LH05-25 A/3-2012 Page 1 of 8 Approval Model Package Power Output (Vo1/Io1) Output (Vo2/Io2) Ripple and Noise(Typ) Efficiency (%)(Typ.) UL/CE LH15-10B05 5V/2800mA 76 UL/CE LH15-10B09 9V/1600mA 78 UL/CE LH15-10B12 12V/1250mA 80 UL/CE LH15-10B15 15V/1000mA 80 UL/CE LH15-10B24 24V/625mA 84 UL/CE LH15-10B48 48V/320mA LH15-10A05 +5V/1500mA -5V/1500mA 76 +12V/650mA -12V/650mA 81 +15V/500mA -15V/500mA 83 LH15-10C0505-05 5V/2000mA ±5V/500mA 75 LH15-10C0512-02 5V/2000mA ±12V/200mA 77 LH15-10C0515-02 5V/1800mA ±15V/200mA 78 LH15-10C0524-01 5V/2000mA ±24V/100mA 78 LH15-10D0505-08 5V/2200mA 5V/800mA 76 LH15-10D0512-04 5V/2000mA 12V/400mA 80 LH15-10D0515-03 5V/2000mA 15V/300mA 80 LH15-10D0524-02 5V/2000mA 24V/200mA 81 UL/CE LH20-10B03 3.3V/4100mA 73 UL/CE LH20-10B05 5V/3500mA 75 UL/CE LH20-10B09 9V/2100mA 77 UL/CE LH20-10B12 12V/1600mA 81 UL/CE LH20-10B15 15V/1300mA 83 UL/CE LH20-10B24 24V/850mA LH20-10A05 +5V/2000mA -5V/2000mA +12V/830mA -12V/830mA +15V/650mA -15V/650mA 83 LH20-10C0512-04 5V/2000mA ±12V/400mA 75 LH20-10C0515-03 5V/2000mA ±15V/300mA 76 LH20-10C0524-02 5V/2000mA ±24V/200mA 77 LH20-10D0512-06 5V/2500mA 12V/600mA 75 LH20-10D0524-03 5V/2500mA 24V/300mA 77 LH15-10A12 LH15-10A15 LH20-10A12 62X45X22.5mm 70X48X23.5mm 15W 20W LH20-10A15 85 85 50mV 75 82 UL/CE LH25-10B03 3.3V/4100mA 73 UL/CE LH25-10B05 5V/4100mA 74 UL/CE LH25-10B09 9V/2500mA UL/CE LH25-10B12 UL/CE LH25-10B15 15V/1600mA 83 UL/CE LH25-10B24 24V/1100mA 85 UL/CE LH25-10B48 48V/500mA 87 70X48X23.5mm 25W 78 12V/2100mA 50mV 82 Note: LH05-10AXX sample Vo2 for feedback；LH10/15/20-10AXX sample positive and negative output for feedback；others sample Vo1 for feedback。 INPUT SPECIFICATIONS Input voltage range 85～264VAC, Input frequency 47～63Hz Input current Inrush current Leakage current 120～370VDC 110VAC 230VAC LH05 models 120mA, typ 70mA, typ LH10 models 230mA, typ 120mA, typ LH15 models 250mA, typ 140mA, typ LH20 models 330mA, typ 180mA, typ LH25 models 420mA, typ 230mA, typ 110VAC 230VAC LH05 models 10A, typ 20A, typ LH10 models 10A, typ 20A, typ LH15 models 10A, typ 20A, typ LH20/LH25 models 16A, typ 30A, typ 0.3mA RMS typ./230VAC/50Hz The copyright and authority for the interpretation of the products are reserved by MORNSUN Specifications subject to change without notice LH05-25 A/3-2012 Page 2 of 8 LH05 models LH10/LH15 models LH20/LH25 models Recommended External Input Fuse (Special package series include fuse) 1A/250V 2A/250V 3.15A/250V Slow-Blow Slow-Blow Slow-Blow OUTPUT SPECIFICATIONS Voltage set accuracy ±2% Input variation ±0.5% ±1.5% (main output) (supplem ent output) Single output models ±1% Dual output models (balanced load) ±2% Isolated triple output (balanced load) Vo1: ±3% (main output) ±Vo2: ±5% (supplem ent output) Isolated and separated twin output (balanced load) Vo1: ±3% Vo2: ±5% Minimum load single output models Dual output models (balanced load) Isolated and separated twin output (balanced load) Isolated triple output (balanced load) 0% 10% 10% 10% Ripple & noise(p-p) (20MHz Bandwidth) 50mV (Typ) Load variation (10-100%) Short circuit protection (main output) (supplement output) 100mV (Max) Continuous, and auto resume ≥110% Io Over current protection Output over-voltage protection 3.3 / 5VDC models ≤7.5VDC 9VDC models ≤12VDC 12 / 15VDC models ≤20VDC 24VDC models ≤30VDC 48VDC models ≤60VDC COMMON SPECIFICATIONS Operating temperature : -40℃～+70℃ Power derating 3.75% / ℃ Temperature ranges (55℃～70℃) (-40℃～-10℃) Storage temperature: Hold-up time Humidity Case temperature: +90℃ max (Vin=230VAC) 80ms(typ) (non condensing) 95%(max) 0.02%/℃ (main output) Temperature coefficient 0.15%/℃ (supplement output) Switching frequency 65kHz(typ.) I/O-isolation voltage EMI 3000VAC/1Min CE CISPR22/EN55022, CLASS B(without external circuit ) RE CISPR22/EN55022, CLASS B(without external circuit ) ESD IEC/EN 61000-4-2 Contact ±6KV / Air ±8KV perf. Criteria B RS IEC/EN 61000-4-3 10V/m perf. Criteria A IEC/EN 61000-4-4 ±2KV(without external circuit ) perf. Criteria B EMC EMS 2% / ℃ -40℃～+105℃ EFT IEC/EN 61000-4-4 ±4KV (with typical applications Figure 6) IEC/EN 61000-4-5 Surge Safety standards perf. Criteria B perf. Criteria B IEC60950,EN60950,UL60950 Safety approvals Safety Class ±1KV/±2KV(without external circuit) IEC/EN 61000-4-5 ±2KV/±4KV (with typical applications Figure 6) perf. Criteria B EN60950,UL60950 LH15-10BXX CLASSⅡ Others CLASSⅠ Case material UL94V-0 Install PCB mounting, Chassis mounting with Screw Terminals, DIN-Rail mounting MTBF >300,000H @25℃ Note: 1. Ripple and Noise are measured by the method of parallel lines; 2. All specifications measured at Ta=25°C, humidity<75%, nominal input voltage and rated output load unless otherwise specified; 3. All characteristics are for listed model only, non-standard models may perform differently, please contact our technical person for more detail. The copyright and authority for the interpretation of the products are reserved by MORNSUN Specifications subject to change without notice LH05-25 A/3-2012 Page 3 of 8 PARALLEL LINES MEASURE C op p e r sh e et FU S E L L +Vo C1 AC-DC N C2 Co n ne ct Os c illo g r a p h P ro b e L oa d -Vo N 12 . 7 mm 2 5. 4 mm C1: 1μF (ceramic capacitor) 2 5 .4 mm C2: 10μF (electrolytic capacitor) TYPICAL EFFICIENCY CURVE Vin=230Vac Load=100% 95 90 LH05-10B05 LH05-10B24 LH10-10B05 LH10-10B24 LH15-10B05 LH15-10B24 LH20-10B05 LH20-10B24 Efficiency(%) 85 80 75 70 65 LH05-10B05 88 Efficiency (%) 90 84 LH05-10B24 LH10-10B05 LH10-10B24 82 LH15-10B05 80 LH15-10B24 LH20-10B05 LH20-10B24 86 78 76 60 74 55 72 70 50 10 20 30 40 50 60 70 80 85 90 100 120 Load(%) 240 264 Input voltage (Vac) INPUT VOLTAGE VS LOAD TEMPERATURE VS LOAD Load(%) Load（%） 100 100 80 75 60 80 40 60 43.75 40 20 20 240 264 85 100 Input voltage(Vac) *Note: When input DC, Vdc=1.414*Vac-20. -40 -10 55 Temperature(℃) 70 TRIM APPLICATION & TRIM CALCULATION Application circuit for TRIM (Part in broken line is the interior of models) Formula for resistance of Trim up: R T = aR 2 R 2 -a -R 3 a= Vref R1 Vot-Vref down: R T = aR 1 R 1 -a -R 3 a= Vot-Vref R2 Vref +Vot +Vot R1 Vref RT R1 R3 Trim Vref R2 R3 Trim RT R2 0V 0V Trim up Trim down Note: Value for R1, R2, R3, and Vref refer to the following table. RT: Resistance of Trim a: User-defined parameter, no actual meanings. Vo(V) 5 9 12 15 24 48 3.3 Resistance 3.8 8.6 R1(KΩ) 7.5 2 3.3 7.5 1.2 3 6 2.8 R2(KΩ) 1.2 3.3 1 1.5 1 22 7 R3(KΩ) 1 1 1 1 1 1 1.2 1.2 Vref(V) 2.5 2.5 2.5 2.5 2.5 2.5 4 Vot(V) Output voltage of Trim, variation ≤ ±10% TYPICAL APPLICATIONS FUSE NTC L L N N +Vo C1 C2 T VS1 RL FUSE NTC L L +Vo N N Com -Vo -Vo Figure 1: LH**-10B**( Single Output) FUSE NTC L L N N + C1 FUS E L + NT C L Vo 1 N C4 T VS2 R L C1 C2 T VS1 RL C3 C4 TVS2 RL C5 C6 T VS3 R L Vo1 - +Vo2 N Com Vo 2 - C3 Figure 2:LH**-10A**(Dual Output) C2 TVS1 RL + C1 C 2 T VS1 R L C3 C4 T VS2 RL Figure 3:LH**-10D**(Isolate Twin Output) The copyright and authority for the interpretation of the products are reserved by MORNSUN -Vo2 Figure 4:LH**-10C**(Triple Output) Specifications subject to change without notice LH05-25 A/3-2012 Page 4 of 8 ca n u se MO RNSUN’s FC- L0 1 D FUSE R2 L L L N N L +Vo +Vo CY1 AC-DC MOV1 LCM CX R3 CY2 -Vo -Vo CY3 A CDC CY4 OUTPUT R1 N N Figure 5:Note: This application is not supported for this series. Figure 6:LH05-25 series Recommended circuit for application require higher EMC standard (external circuit output same as above) Figure 7: EMC application circuit PCB layout Safety and recommend wiring: linewidth A≥3mm,B≥6mm,C≥9mm MODEL C2 LH05-10B03 LH05-10B05 LH05-10B09 LH05-10B12 LH05-10B15 LH05-10B24 330 330 120 120 68 68 LH05-10A05 LH05-10A12 LH05-10A15 LH05-10A24 LH05-10C0505-01 LH05-10C0512-01 LH05-10C0515-01 LH05-10C0524-01 LH05-10D0505-01 LH05-10D0512-01 LH05-10D0515-01 LH05-10D0524-01 120 68 47 10 220 120 120 120 220 220 120 120 LH10-10B03 LH10-10B05 LH10-10B09 LH10-10B12 LH10-10B15 LH10-10B24 LH10-10A05 LH10-10A12 LH10-10A15 LH10-10A24 LH10-10C0512-02 LH10-10C0515-02 LH10-10D0505-02 LH10-10D0512-02 LH10-10D0515-02 LH10-10D0524-02 470 330 120 120 120 68 220 120 47 33 220 220 220 220 220 220 LH15-10B03 LH15-10B05 LH15-10B09 LH15-10B12 LH15-10B15 LH15-10B24 680 680 470 220 220 68 EXTERNAL CAPACITORS TYPICAL VALUE(Unit: µF) C4 C6 TVS1 TVS2 TVS3 SMBJ7.0A SMBJ20A SMBJ20A SMBJ30A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ20A SMBJ20A SMBJ30A SMBJ7.0A SMBJ20A SMBJ20A SMBJ30A SMBJ7.0A SMBJ20A SMBJ20A SMBJ30A SMBJ7.0A SMBJ20A SMBJ20A SMBJ30A SMBJ7.0A SMBJ7.0A SMBJ12A SMBJ20A SMBJ20A SMBJ30A SMBJ7.0A SMBJ20A SMBJ20A SMBJ30A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ20A SMBJ20A SMBJ30A SMBJ20A SMBJ20A SMBJ7.0A SMBJ20A SMBJ20A SMBJ30A SMBJ20A SMBJ20A SMBJ7.0A SMBJ7.0A SMBJ12A SMBJ20A SMBJ20A SMBJ30A 120 68 47 10 22 22 22 22 22 22 22 22 220 120 47 33 68 47 68 68 47 47 22 22 22 22 68 47 The copyright and authority for the interpretation of the products are reserved by MORNSUN SMBJ7.0A SMBJ7.0A SMBJ12A SMBJ20A SMBJ20A SMBJ30A Specifications subject to change without notice LH05-25 A/3-2012 Page 5 of 8 LH15-10B48 LH15-10A05 LH15-10A12 LH15-10A15 LH15-10C0505-05 LH15-10C0512-02 LH15-10C0515-02 LH15-10C0524-01 LH15-10D0505-08 LH15-10D0512-04 LH15-10D0515-03 LH15-10D0524-02 33 470 220 120 470 470 470 470 470 470 470 470 LH20-10B03 LH20-10B05 LH20-10B09 LH20-10B12 LH20-10B15 LH20-10B24 LH20-10A05 LH20-10A12 LH20-10A15 LH20-10C0512-04 LH20-10C0515-03 LH20-10C0524-02 LH20-10D0512-06 LH20-10D0524-03 330 330 220 220 220 220 470 120 68 330 330 330 330 330 LH25-10B03 LH25-10B05 LH25-10B09 LH25-10B12 LH25-10B15 LH25-10B24 LH25-10B48 330 330 330 330 330 120 68 470 220 120 220 120 120 120 470 220 120 47 220 120 120 120 470 120 68 120 120 47 220 120 120 120 47 SMBJ64A SMBJ7.0A SMBJ20A SMBJ20A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ20A SMBJ20A SMBJ7.0A SMBJ20A SMBJ20A SMBJ30A SMBJ7.0A SMBJ20A SMBJ20A SMBJ30A SMBJ7.0A SMBJ7.0A SMBJ12A SMBJ20A SMBJ20A SMBJ30A SMBJ7.0A SMBJ20A SMBJ20A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ7.0A SMBJ20A SMBJ20A SMBJ20A SMBJ20A SMBJ30A SMBJ20A SMBJ30A SMBJ7.0A SMBJ20A SMBJ20A SMBJ30A SMBJ20A SMBJ20A SMBJ30A SMBJ7.0A SMBJ7.0A SMBJ12A SMBJ20A SMBJ20A SMBJ30A SMBJ64A Note: 1. Output filtering capacitors C2, C4 and C6 are electrolytic capacitors, It is recommended to use high frequency and low impedance electrolytic capacitors. For capacitance and current of capacitor please refer to manufacture’s datasheet. Voltage derating of capacitor should be 80% or above. C1,C3,C5 are use to filter high frequency noise，suggest choose 1µF. TVS is recommended component to protect post-circuits (if converter fails). External input NTC is recommended to use 5D-9. 2. For standard EMC requirement, please refer to figure 1, figure 2, figure 3 or figure 4, if higher EMC requirement ,please refer to figure 6. MOV: Varistor, model: 561KD14, it is used to protect the device under surge; R1 、R2：2Ω/3W Winding resistor； R3：1MΩ/2W； CY1、CY2、CY3、CY4：102M/400VAC； CX：224K/275VAC； LCM：10mH-30mH； FC-L01D：MORNSUN’s 2KV/4KV Surge protector. 3. FUSE：LH05 recommended to use 1A/250V，LH10/LH15 recommended to use 2A/250V, LH20/LH25 recommended to use 3.15A/250V. PCB MOUNTING WITH SOLDER PINS LH10 series C LH05 series (Main View ) 1 H 1 2 Ф1.00[0.039] 4 5 6 7 8 4 5 6 7 8 2 3 3 Ф1.50[0.059] 3 (Bottom View) E 2 6 5 4 Trim 1 Ф1.50[0.059] F F F F F B 7 LH2 5 series LH 15 series G E 8 1 4 5 6 7 8 D A Note: Unit:mm[inch] Pin length(H):≥ 6.00mm[0.236inch] Pin diameter tolerances:±0.10mm[±0.004inch] General tolerances:±0.50mm[±0.020inch] 2 1 Trim 2 4 5 6 7 8 3 3 Ф1.50[0.059] Ф1.50[0.059] Note: gri d2.54*2.54mm. The copyright and authority for the interpretation of the products are reserved by MORNSUN Specifications subject to change without notice LH05-25 A/3-2012 Page 6 of 8 FOOTPRINT DETAILS OUTLINE AND DIMENSIONS (Unit: mm) Pin LHXX-10B LHXX-10A LHXX-10C LHXX-10D 2 AC(N) AC(N) AC(N) AC(N) 23.50 3 AC(L) AC(L) AC(L) AC(L) -Vo -Vo -Vo1 -Vo1 NO. LH05 LH10 LH15 LH20 LH25 A 48.50 55.00 62.00 70.00 70.00 1 B 36.00 45.00 45.00 48.00 48.00 C 20.50 21.00 22.50 23.50 D 40.50 47.00 54.00 62.00 62.00 4 E 12.50 17.50 17.50 20.00 20.00 5 No Pin No Pin +Vo1 +Vo1 No Pin COM -Vo2 No Pin F 4.00 5.00 5.00 5.75 5.75 6 G 10.00 12.50 12.50 12.50 12.50 7 No Pin No Pin COM -Vo2 8 +Vo +Vo +Vo2 +Vo2 Trim Trim** No Pin No Pin No Pin MODELS WEIGHT WEIGHT LH05 LH10 LH15 LH20 LH25 (Typ.) 50g 70g 80g 120g 120g There is no pin “1” on LH15-10BXX Trim**: only for LH20/25-10BXX Series. LHXXA2 CHASSIS MOUNTING WITH SCREW TERMINALS 96.10[3.783] 86.10[3.390] 4 5 6 7 8 ( Top View) 3 31.00[1.220] 1 2 46.00[1.811] 54.00[2.126] Ф3.50[0.138] ( Main View ) 8.50[0.335] 20.60[0.811] Note: Unit: mm[inch] General tolerances: ±0.50mm[±0.020inch] *The figure above is related to LH15 series, the height of other series is different. FOOTPRINT DETAILS OUTLINE AND DIMENSIONS (Unit: mm) MODEL Pin DIMENSIONS LHXX-10B LHXX-10A LHXX-10C LHXX-10D LH05XXA2 96.1x54x29 1 LH10XXA2 96.1x54x29.5 2 AC(N) AC(N) AC(N) AC(N) LH15XXA2 96.1x54x31 3 AC(L) AC(L) AC(L) AC(L) LH20XXA2 96.1x54x32 4 -Vo -Vo -Vo1 -Vo1 96.1x54x32 5 NC NC +Vo1 +Vo1 6 NC/Trim** COM -Vo2 NC 7 NC NC COM -Vo2 8 +Vo +Vo +Vo2 +Vo2 LH25XXA2 MODELS WEIGHT WEIGHT LH05 LH10 LH15 LH20 LH25 Typ. 100g 120g 130g 170g 170g There is no pin “1” on LH15-10BXXA2. NC/Trim** : The pin is Trim on LH20/25-10BXXA2 , The pin is not connected on other single output products. The copyright and authority for the interpretation of the products are reserved by MORNSUN Specifications subject to change without notice LH05-25 A/3-2012 Page 7 of 8 LHXXA4 DIN-RAIL MOUNTING 5 6 7 8 ( Top View) 31.00[1.220] 3 4 ( Main View) 8.50 [0.335] 20.60[0.811] OUTLINE AND DIMENSIONS (Unit: mm) Note: Unit: mm[inch] General tolerances: ±0.50mm[±0.020inch] MODEL DIMENSIONS LH05XXA4 96.1x54x33.6 LH10XXA4 96.1x54x34.1 LH15XXA4 96.1x54x35.6 WEIGHT LH05 LH20XXA4 96.1x54x36.6 Typ. 140g LH25XXA4 35.60[1.402] 1 2 46.00[1.811] 54.00[2.126] 96.10[3.783] 86.10[3.390] MODELS WEIGHT LH10 LH15 160g 170g LH20 LH25 210g 210g 96.1x54x36.6 * The figure above is related to LH15 series, the height of other series is different. **Footprint Details are the sam e as Chassis mounting with Screw Terminals’. PACKAGE DIAGRAM Special Package Series PCB mounting Series (LH05 series) (Other series) Inner packaging box dimensions: L*W*H=355*192*93mm Packaging quantity: 20pcs (LH05 series: 40pcs) Outer packaging box dimensions: L*W*H=405*380*305mm Packaging quantity: 120pcs (LH05 series: 240pcs) Inner packaging box dimensions: L*W*H=365*350*105mm Packaging quantity: 24pcs Outer packaging box dimensions: L*W*H=390*360*245mm Packaging quantity: 48pcs MORNSUN Science & Technology Co.,Ltd. Address: No. 5, Kehui St. 1, Kehui development center, Science Ave., Guangzhou Science City, Luogang district, Guangzhou,P.R.China. Tel: 86-20-28203030 Fax:86-20-38601272 Http://www.mornsun-power.com The copyright and authority for the interpretation of the products are reserved by MORNSUN Specifications subject to change without notice LH05-25 A/3-2012 Page 8 of 8