ALUMINUM ELECTROLYTIC CAPACITORS AK Snap-in Terminal Type, Permissible Abnormal Voltage, Wide Temperature Range series Withstanding 2000 hours application of rated ripple current at 105°C. Extended voltage range at 200V, 400V and 420V. Improved safety features for abnormally excessive voltage. Ideally suited for the equipment used at voltage fluctuating area. Adapted to the RoHS directive (2002/95/EC). AK Smaller AQ Specifications Performance Characteristics Item Category Temperature Range – 25 ~ +105°C Rated Voltage Range 200 • 400 • 420V Rated Capacitance Range 33 ~ 1200µF Capacitance Tolerance ± 20% at 120Hz, 20°C Leakage Current I 3 CV (µA) (After 5 minutes' application of rated voltage) [C : Rated Capacitance (µF) V : Voltage (V)] 0.20MAX. 120Hz 20°C tan δ Rated voltage(V) Impedance ratio (MAX) Z – 25°C/Z+20°C Stability at Low Temperature 200 8 400 • 420 8 Measurement frequency : 120Hz Endurance After an application of DC voltage (in the range of rated DC voltage even after over-lapping the specified ripple current) for 2000 hours at 105°C, capacitors meet the characteristic requirements listed at right. Capacitance change Within ±20% of initial value tan δ 200% or less of initial specified value Leakage current Initial specified value or less Shelf Life After storing the capacitors under no load at 105°C for 1000 hours, and after performing voltage treatment based on JIS C 5101-4 clause 4.1 at 20°C, they will meet the requirements listed at right. Capacitance change Within ±15% of initial value tan δ 150% or less of initial specified value Initial specified value or less Leakage current Safety Performance The pressure relief vent will operate in normal conditions, with no dangerous conditions such as flames, ignitions or dispersion of pieces of the capacitor and/or case. rating test conditions Capacitance (µF) Voltage (V) Limited DC current Test voltage 330 C < 330 4A 200 330 C < 470 5A 300VDC and 375VDC 470 C < 470 7A 330 C < 100 2A 400 100 C < 220 4A 500VDC and 600VDC 220 C < 470 7A 330 C < 100 2A 420 100 C < 220 520VDC and 630VDC 4A 220 C < 470 7A Marking Printed with white color letter on black sleeve Drawing Polarity bar Sleeve (P.E.T.) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 LAK 2D 6 8 1 MEL A 5 0 f D +1MAX. Bottom plate (code ZB only) Type numbering system (Example : 200V 680µF) 10 L±2 Pressure relief vent 4.0±0.5 .1 +0.21 0.8 -0. 4.0±0.5 2.5 0.8 +0.2 -0.1 10 ±0 2-2 f±0.1 (PC board hole dimensions) Case length code Case dia. code Configuration fD Code 22 Z Capacitance tolerance (±20%) 25 A Rated Capacitance (680µF) 30 B Rated voltage (200V) 35 C Series name Type Bottom Plate Bottom ZB With Plate code less Without Bottom Plate Please contact to us if other configurations are required. 1.5+0.2 -0.1 (Terminal dimensions) Minimum order quantity : 50pcs. Dimension table in next page. CAT.8100V ALUMINUM ELECTROLYTIC CAPACITORS AK series Dimensions V(Code) Cap.(µF) φD Code 33 330 39 390 47 470 56 560 68 680 82 820 100 101 120 121 150 151 180 181 220 221 270 271 330 331 390 391 470 471 560 561 680 681 820 821 1000 102 1200 122 22 25 200V (2D) 30 35 22 × 20 0.35 22 × 20 0.50 25 × 20 0.65 22 × 25 0.70 22 × 25 0.74 22 × 30 0.90 22 × 30 1.05 22 × 35 1.20 22 × 40 1.30 22 × 45 1.50 30 × 20 0.70 25 × 25 0.85 25 × 30 1.05 25 × 30 1.20 25 × 35 1.30 25 × 40 1.50 25 × 50 1.70 35 × 20 1.10 30 × 25 1.05 30 × 25 1.20 30 × 25 1.35 30 × 35 1.55 30 × 40 1.70 30 × 45 1.99 30 × 50 2.10 35 × 25 1.55 35 × 30 1.70 35 × 35 1.99 35 × 40 2.10 35 × 50 2.30 22 22 × 20 0.22 22 × 20 0.30 22 × 25 0.35 22 × 25 0.38 22 × 25 0.40 22 × 30 0.50 22 × 35 0.55 22 × 40 0.60 22 × 45 0.70 22 × 50 0.80 25 25 × 20 0.35 25 × 20 0.38 25 × 25 0.45 25 × 25 0.50 25 × 30 0.53 25 × 30 0.60 25 × 35 0.70 25 × 40 0.80 25 × 45 0.90 400V (2G) 30 35 30 × 20 0.40 30 × 20 0.50 30 × 20 0.50 30 × 25 0.53 30 × 25 0.60 30 × 30 0.70 30 × 30 0.80 30 × 35 0.90 30 × 40 0.98 30 × 50 1.21 35 × 20 0.55 35 × 25 0.70 35 × 25 0.80 35 × 30 0.90 35 × 35 0.96 35 × 40 1.21 35 × 45 1.32 35 × 50 1.45 22 22 × 25 0.25 22 × 25 0.35 22 × 25 0.38 22 × 30 0.45 22 × 35 0.64 22 × 40 0.69 22 × 45 0.75 25 25 × 25 0.45 25 × 30 0.64 25 × 30 0.69 25 × 35 0.75 25 × 40 0.82 25 × 45 0.90 420V (W6) 30 35 30 × 25 0.69 30 × 30 0.75 30 × 30 0.82 30 × 35 0.90 30 × 40 1.00 30 × 45 1.10 35 × 25 0.75 35 × 25 0.82 35 × 30 0.90 35 × 35 1.00 35 × 40 1.10 35 × 45 1.20 Case size φ D × L (mm) Rated ripple Rated Ripple (Arms) at 105°C 120Hz Frequency coefficient of rated ripple current Frequency (Hz) 200V Coefficient 400 • 420V 50 0.85 0.88 60 0.88 0.90 120 1.00 1.00 1k 1.15 1.10 10k~ 1.20 1.15 CAT.8100V