Hittite HMC425LP3 0.5 db lsb gaas mmic 6-bit digital positive control attenuator, 2.2 - 8.0 ghz Datasheet

HMC425LP3 / 425LP3E
v03.0409
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz
ATTENUATORS - DIGITAL - SMT
5
Typical Applications
Features
The HMC425LP3 / HMC425LP3E is ideal for:
0.5 dB LSB Steps to 31.5 dB
• WLAN & Point-to-Multi-Point
Single Control Line Per Bit
• Fiber Optics & Broadband Telecom
± 0.5 dB Typical Bit Error
• Microwave Radio & VSAT
Single +5V Supply
• Military
3x3 mm SMT Package
Functional Diagram
General Description
The HMC425LP3 & HMC425LP3E are broadband
6-bit GaAs IC digital attenuators in low cost leadless
surface mount packages. Covering 2.2 to 8.0 GHz,
the insertion loss is less then 3.8 dB typical. The
attenuator bit values are 0.5 (LSB), 1, 2, 4, 8, and
16 dB for a total attenuation of 31.5 dB. Attenuation
accuracy is excellent at ± 0.5 dB typical step error
with an IIP3 of +40 dBm. Six control voltage inputs,
toggled between 0 and +3 to +5V, are used to select
each attenuation state. A single Vdd bias of +3 to +5V
is required.
Electrical Specifi cations,
TA = +25° C, With Vdd = +5V & Vctl = 0/+5V (Unless Otherwise Noted)
Frequency
(GHz)
Parameter
Typ.
Max.
Units
3.8
4.3
dB
dB
Insertion Loss
2.2 - 6.0 GHz
6.0 - 8.0 GHz
3.5
3.8
Attenuation Range
2.2 - 8.0 GHz
31.5
dB
Return Loss (RF1 & RF2, All Atten. States)
2.2 - 8.0 GHz
15
dB
Attenuation Accuracy:
(Referenced to Insertion Loss)
All States
2.2 - 8.0 GHz
± 0.5 + 5% of Atten. Setting Max.
dB
Input Power for 0.1 dB Compression
Vdd = 5V
Vdd = 3V
2.2 - 8.0 GHz
22
19
dBm
dBm
REF - 16.0 dB States
16.5 - 31.5 dB States
2.2 - 8.0 GHz
45
35
dBm
dBm
160
180
ns
ns
Input Third Order Intercept Point
(Two-Tone Input Power= 0 dBm Each Tone)
Switching Characteristics
tRISE, tFALL (10/90% RF)
tON, tOFF (50% CTL to 10/90% RF)
5 - 116
Min.
2.2 - 8.0 GHz
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC425LP3 / 425LP3E
v03.0409
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz
(Only Major States are Shown)
0
-2
-5
RETURN LOSS (dB)
INSERTION LOSS (dB)
0
-4
+25 C
+85 C
-40 C
-6
-8
0.5 dB
1 dB
2 dB
4 dB
8 dB
16 dB
31.5 dB
-10
-15
-20
-10
-25
1
2
3
4
5
6
7
8
9
10
1
2
3
4
FREQUENCY (GHz)
5
6
7
8
9
10
28
32
9
10
FREQUENCY (GHz)
Normalized Attenuation
Bit Error vs. Attenuation State
(Only Major States are Shown)
2
-5
1
-10
BIT ERROR (dB)
NORMALIZED ATTENUATION (dB)
0
-15
-20
0.5 dB
1 dB
2 dB
4 dB
-25
8 dB
16 dB
31.5 dB
0
2.4 GHz
3.5 GHz
5.5 GHz
8.0 GHz
-1
-30
-2
-35
1
2
3
4
5
6
7
8
9
0
10
4
8
12
16
20
24
ATTENUATION STATE (dB)
FREQUENCY (GHz)
Bit Error vs. Frequency
Relative Phase vs. Frequency
(Only Major States are Shown)
(Only Major States are Shown)
80
2
1.5
0.5 dB
1 dB
2 dB
4 dB
8 dB
16 dB
31.5 dB
RELATIVE PHASE (deg)
60
1
BIT ERROR (dB)
ATTENUATORS - DIGITAL - SMT
5
Return Loss RF1, RF2
Insertion Loss
0.5
0
-0.5
-1
0.5 dB
1 dB
2 dB
4 dB
-1.5
8 dB
16 dB
31.5 dB
40
20
0
-20
-40
-2
1
2
3
4
5
6
7
FREQUENCY (GHz)
8
9
10
1
2
3
4
5
6
7
8
FREQUENCY (GHz)
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 117
HMC425LP3 / 425LP3E
v03.0409
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz
5
Worst Case Step Error
Between Successive Attenuation States
Bias Voltage & Current
STEP ERROR (dB)
ATTENUATORS - DIGITAL - SMT
1.2
Vdd Range = 3.0 to +5.0 Vdc
0.8
Vdd
(VDC)
Idd (Typ.)
(μA)
0.4
+3.0
10
+5.0
30
0
-0.4
Control Voltage
-0.8
State
Bias Condition
Low
0 to 0.2V @ 10 uA Typ.
High
Vdd ± 0.2V @ 5 uA Typ.
-1.2
1
2
3
4
5
6
7
8
9
10
FREQUENCY (GHz)
Note: Vdd = +3V to +5V
Truth Table
Control Voltage Input
Attenuation State
RF1 - RF2
V1
16 dB
V2
8 dB
V3
4 dB
V4
2 dB
V5
1 dB
V6
0.5 dB
High
High
High
High
High
High
Reference
I.L.
High
High
High
High
High
Low
0.5 dB
High
High
High
High
Low
High
1 dB
High
High
High
Low
High
High
2 dB
High
High
Low
High
High
High
4 dB
High
Low
High
High
High
High
8 dB
Low
High
High
High
High
High
16 dB
Low
Low
Low
Low
Low
Low
31.5 dB
Any combination of the above states will provide an attenuation
approximately equal to the sum of the bits selected.
5 - 118
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC425LP3 / 425LP3E
v03.0409
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz
5
Control Voltage (V1 to V6)
Vdd +0.5 Vdc
Bias Voltage (Vdd)
+7.0 Vdc
Staorage Temperature
-65 to +150 °C
Operating Temperature
-40 to +85 °C
RF Input Power (2.4 - 8.0 GHz)
+30 dBm
ESD Sensitivity (HBM)
Class 1A
ATTENUATORS - DIGITAL - SMT
Absolute Maximum Ratings
ELECTROSTATIC SENSITIVE DEVICE
OBSERVE HANDLING PRECAUTIONS
Outline Drawing
NOTES:
1. LEADFRAME MATERIAL: COPPER ALLOY
2. DIMENSIONS ARE IN INCHES [MILLIMETERS]
3. LEAD SPACING TOLERANCE IS NON-CUMULATIVE
4. PAD BURR LENGTH SHALL BE 0.15mm MAXIMUM.
PAD BURR HEIGHT SHALL BE 0.05mm MAXIMUM.
5. PACKAGE WARP SHALL NOT EXCEED 0.05mm.
6. ALL GROUND LEADS AND GROUND PADDLE MUST BE
SOLDERED TO PCB RF GROUND.
7. REFER TO HITTITE APPLICATION NOTE FOR SUGGESTED
LAND PATTERN.
Package Information
Part Number
Package Body Material
Lead Finish
MSL Rating
HMC425LP3
Low Stress Injection Molded Plastic
Sn/Pb Solder
MSL1
HMC425LP3E
RoHS-compliant Low Stress Injection Molded Plastic
100% matte Sn
MSL1
Package Marking [3]
[1]
425
XXXX
[2]
425
XXXX
[1] Max peak reflow temperature of 235 °C
[2] Max peak reflow temperature of 260 °C
[3] 4-Digit lot number XXXX
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 119
HMC425LP3 / 425LP3E
v03.0409
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz
ATTENUATORS - DIGITAL - SMT
5
5 - 120
Pin Descriptions
Pin Number
Function
Description
1, 3, 10, 12
GND
Package bottom has an exposed metal paddle
that must also be connected to RF ground.
2, 11
RFIN, RFOUT
This pin is DC coupled and matched to 50 Ohm.
Blocking capacitors are required.
4, 5, 6, 7, 8, 9
V1 - V6
See truth table and control voltage table.
13, 14, 16
N/C
This pin should be connected to PCB RF ground to
maximize performance.
15
Vdd
Supply Voltage.
Interface Schematic
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
HMC425LP3 / 425LP3E
v03.0409
0.5 dB LSB GaAs MMIC 6-BIT DIGITAL
POSITIVE CONTROL ATTENUATOR, 2.2 - 8.0 GHz
* R1 - R6 = 100 Ohm.
These resistors are optional
and may be used to enhance
decoupling of the RF path
from the control inputs.
ATTENUATORS - DIGITAL - SMT
5
Evaluation PCB
List of Materials for Evaluation PCB 105408 [1]
Item
Description
J1 - J2
PCB Mount SMA Connector
J3
8 Pin DC Connector
C1
0.01 μF Capacitor, 0603 Pkg.
C2, C3
100 pF Capacitor, 0402 Pkg.
R1 - R6
100 Ohm Resistor, 0603 Pkg.
U1
HMC425LP3 / HMC425LP3E Digital Attenuator
PCB [2]
105260 Evaluation PCB
[1] Reference this number when ordering complete evaluation PCB
The circuit board used in the final application should
use RF circuit design techniques. Signal lines
should have 50 ohm impedance while the package
ground leads and exposed paddle should be connected directly to the ground plane similar to that
shown. A sufficient number of via holes should be
used to connect the top and bottom ground planes.
The evaluation circuit board shown is available from
Hittite upon request.
[2] Circuit Board Material: Rogers 4350
For price, delivery, and to place orders, please contact Hittite Microwave Corporation:
20 Alpha Road, Chelmsford, MA 01824 Phone: 978-250-3343 Fax: 978-250-3373
Order On-line at www.hittite.com
5 - 121
Similar pages