IES-0521 4 x 802.3af + 1 FE Unmanaged Switch -40 to 75C, Desktop Overview Redundancy High Reliability Plug & Play Power over Ethernet Safety LevelOne IES-0521 Industry Ethernet Switch provides 4 PoE ports of 10/100Base-TX plus 1 ports of 10/100Base-TX Ethernet to enable high speed network at mission-critical environment. The compact metal housing is designed for desktop space saving, plus the clearly visible status LEDs provide simple monitoring of port link activity. All components are built to withstand harsh environment applications without compromise where humidity, temperature variation and even shock vibration are concerns, including Electric & Utility, Critical Infrastructure, Transportation and Surveillance Security. This device operates under -40 to 75 Celsius (-40 to 167 Fahrenheit) temperature. This switch is Power Sourcing Equipment (PSE), and it is fully complied with IEEE 802.3af PoE standard at maximum 15.4W power budget per port. It helps to save infrastructure wiring costs dramatically by eliminating electric wiring and less UPS needed. This redundant power system is designed to meet the challenge of power failure to ensure reliability and constant availability. Single power design works fine in non-critical network applications, but it falls short drastically for network applications in transportation, automate production or banking. This unmanaged Industrial Ethernet Switch is designed for the demanding industrial environments at businesses in need of instant connectivity with no setup or configure required, truly plug and play. This device has been tested under UL508 standard for Industrial Control Equipment to endurance under test turn on and off 6,000 times while loaded, with no single failure; also with NEMA (National Manufacturers Association) TS2 Environmental certified for the Traffic Control Equipment that withstand extreme temperatures, operating voltage and humidity fluctuation, vibration and shock commonly experienced in severe outdoor environments. Features - Provides flexibility of 5 Ethernet ports that configure in combinations of copper and fiber optic interfaces - -40°C to 75°C (-40°F to 167°F) and is tested for functional operation @-40°C to 85°C (-40°F to 185°F) - Port1 - 4 support IEEE802.3af Power over Ethernet (PoE) Power Sourcing Equipment (PSE) - Provides Wall and Desktop mounting - Complies with IEC61000-6-2 EMC Generic standard immunity for Industrial environment - Complies with NEMA TS2 Environmental requirements for Traffic control equipment - Alarms for power and port link failure by relay output - Redundant power inputs with Terminal Block and DC Jack Diagrams Unit: mm 35.00 35.00 200.00 Side Side Top Top Front Front Back Back Specifications Technology Standards Environment IEEE802.3 10BASE-TX, IEEE802.3u 100BASE-TX/FX, IEEE802.3x, IEEE802.3af Forward and Filtering Rate 14,880pps for 10Mbps Packet Buffer Memory 512K bits Processing Type Store-and-Forward Address Table Size 1024 MAC addresses 148,810pps for 100Mbps Half-duplex back-pressure and IEEE802.3x full-duplex flow control Operating Temperature -40°C to 75°C (-40°F to 167°F) Tested @ -40°C to 85°C (-40°F to 185°F) Storage Temperature -40°C to 85°C (-40°F to 185°F) Ambient Relative Humidity 5% to 95% (non-condensing) MTBF 40.86 years Regulatory Approvals ISO Manufactured in an ISO9001 facility Safety UL508 (Pending) EMI FCC Part 15, Class A EN61000-6-4 - EN55022 - EN61000-3-2 - EN61000-3-3 EMS EN61000-6-2 - EN61000-4-2 (ESD Standards) Contact: + / - 6KV; Criteria B Air: + / - 8KV; Criteria B - EN61000-4-3 (Radiated RFI Standards) 10V/m, 80 to 1000MHz; 80% AM Criteria A 3V/m, 1400 to 2000MHz; 80% AM Criteria A 1V/m, 2000 to 2700MHz; 80% AM Criteria A - EN61000-4-4 (Burst Standards) Signal Ports: + / - 4KV; Criteria B D.C. Power Ports: + / - 4KV; Criteria B - EN61000-4-5 (Surge Standards) Signal Ports: + / - 1KV; Line-to-Line; Criteria B D.C. Power Ports: + / - 0.5KV; Line-to-Earth; Criteria B - EN61000-4-6 (Induced RFI Standards) Signal Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A D.C. Power Ports: 10Vrms @ 0.15 - 80MHz; 80% AM Criteria A - EN61000-4-8 (Magnetic Field Standards) 30A/m @ 50, 60Hz; Criteria A Environmental Test Compliance IEC60068-2-6 Fc (Vibration Resistance) 5g @ 10 - 150Hz, Amplitude 0.35mm (Operation/Storage/Transport) IEC60068-2-27 Ea (Shock) 25g @ 11ms (Half-Sine Shock Pulse; Operation) 50g @ 11ms (Half-Sine Shock Pulse; Storage/Transport) IEC60068-2-32 Ed (Free Fall) 1M (3.281ft.) Power Power Input Redundant power inputs: Terminal Block: 47 - 55VDC DC Jack: 47 - 55VDC Power Consumption Device: Max. 10W (without PoE) PoE power budget (depends on power input): 61.6W Max. PoE Power Output Port 1 to 4 IEEE802.3af: up to 15.4W/port, 47 - 55VDC, 350mA Max Supports overload current protection Supports reverse polarity protection Mechanical Casing Metal case IP30 Dimensions 200mm (W) x 134.3mm (D) x 35mm (H) (7.87" (W) x 5.29" (D) x 1.38" (H)) Weight 0.8Kg (1.76lbs.) Installation Wall, Desktop Mounting Interface Ethernet Port 10/100BASE-TX: 5 or 4 ports 100BASE-FX: 0 or 1 ports LED Indicators Per Unit: Power Status (Power 1, Power 2, Power 3, Fault) Per Port: 10/100TX, 100FX: Link/Activity (Green) PoE: Link (Amber) Alarm Contact One relay output with current 1A @ 250VAC Order Information IES-0521 - 4 x 802.3af + 1 FE Unmanaged Switch -40 to 75°C, Desktop Package Contents IES-0521 Quick Installation Guide www.level1.com one world_one brand_one level_