AND120BR Ultra Bright LED Lamps: Type 1 Weight: 0.31 g Unit: mm 1 ø5.8±0.2 AND120BR GaAlAs Red Light Emission T-1 3/4 Package (5 mm) ø5.0±0.2 +0.4 –0.1 • Peak wavelength (λp = 660 nm) high bright emission • All plastic mold type, clear colorless lens • Low drive current: 20 mA for outdoor applications 0.5 mA for indoor applications • Excellent On-Off contrast ratio • Fast response time, capable of pulse operation • Suitable for Outdoor Message Signboards • RoHS Compliant 17.5±1 1.0 11.15 7.65±0.2 2.5 MAX. Features Maximum Ratings (Ta = 25°C) 2.0 0.5 2.54 0.5 Cathode Index 1 2 1. Anode 2. Cathode Characteristics Symbol Rating Unit Forward Current IF 30 mA Reverse Voltage VR 4 V Power Dissipation PD 75 mW Operating Temperature Range TOpr -25 to 85 °C Storage Temperature Range TStg -25 to 100 °C Electro-Optical Characteristics (Ta = 25°C) Characteristics Symbol Test Condition Minimum Typical Maximum Unit Forward Voltage VF IF = 20 mA – 1.9 2.5 V Reverse Current IR VR = 4 V – – 100 µA Luminous Intensity IV IF = 20 mA 500 1,100 – mcd Peak Emission Wavelength lP IF = 20 mA – 660 – nm Spectral Line Half Width ∆λ IF = 20 mA – 25 – nm Dominant Wavelength λd IF = 20 mA – 640 – nm Full Viewing Angle θ IV = 1/2 Peak – 35 – degree Precaution Please be careful of the following: 1. Soldering temperature: 260°C max Soldering time: 3 sec. max Soldering portion of lead: up to 2 mm from the body of the device 2. The lead can be formed up to 5 mm from the body of the device without forming stress. Soldering should be performed after the lead forming. Product specifications contained herein may be changed without prior notice. It is therefore advisable to contact Purdy Electronics before proceeding with the design of equipment incorporating this product. Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 6/14/07 AND120BR GaAlAs Red Light Emission Ultra Bright LED Lamps: Type 1 IF – VF IV – IF 10000 Ta = 25°C 5000 Ta = 25°C 30 Luminous Intensity IV (mcd) Forward Current IF (mA) 50 10 5 3 3000 1000 500 300 100 1 1.4 50 1.5 1.6 1.7 1.8 1.9 2.0 0.5 Forward Voltage VF (V) 3 5 10 30 50 100 300 Forward Current IF (mA) IV – TC Relative Luminous Intensity – Wavelength 3 1.0 Relative Luminous Intensity Relative Luminous Intensity 1 1 0.5 0.3 0.1 -20 0 20 40 60 IF = 20 mA Ta = 25°C 0.8 0.6 0.4 0.2 0 600 80 620 640 660 680 700 720 Wavelength λ (nm) Case Temperature TC (°C) Radiation Pattern IF – Ta 20° 10° 0° 10° Ta = 25°C 20° 30° 30° 40° 40° 50° 50° 60° 60° 70° 70° 80° 80° Allowable Forward Current IF (mA) 80 60 40 20 90° 90° 0 0.2 0.4 0.6 0.8 0 0 20 40 60 80 Ambient Temperature Ta (°C) Purdy Electronics Corporation • 720 Palomar Avenue • Sunnyvale, CA 94085 Tel: 408.523.8200 • Fax: 408.733.1287 • [email protected] • www.purdyelectronics.com 100 6/14/07