Hybrid Aluminum Electrolytic Capacitors NSPE-TZ Series • CYLINDRICAL V-CHIP CONSTRUCTION FOR SURFACE MOUNTING • HIGH TEMPERATURE RANGE (+125°C) NEW • LONG LIFE (UP to 3,000 HOURS) HIGH TEMPERATURE • LOW ESR, HIGH RIPPLE CURRENT & LOW LEAKAGE & • 6.3x6.3 ~ 10x12.8mm CASE SIZES LONG LIFE • REFLOW SOLDERING RATED TO +260°C (ALL SIZES) • MEETS THE REQUIREMENTS OF AEC-Q200* *Contact NIC for supporting test data CHARACTERISTICS Rated Voltage Range Rated Capacitance Range Operating Temp. Range Capacitance Tolerance Max. Leakage Current After 2 Minutes @ 20°C 16 ~ 40Vdc 18 ~ 560μF -55 ~ +125°C ±20% (M) Less than 0.01CV or 3μA whichever is greater W.V. (Vdc) S.V. (Vdc) Working and Surge Voltage Ratings Tan δ @ 120Hz/20°C Low Temperature Stability Impedance Ratio @ 100KHz Load Life Test @ +125°C and Rated Voltage Z-55°C/Z+25°C Z+125°C/Z+20°C W.V. (Ved) φ6.3 Dia. φ8 & φ10 Dia. Capacitance Change Tan δ ESR Leakage Current 16 20 25 32 35 44 40 50 0.16 0.75 ~ 1.25 0.75 ~ 1.25 16 1500 2500 25 35 40 φ6.3X6.3: 1500, φ6.3X8: 2000 3000 Within ±30% of initial measured value Less than 200% of specified max. value Less than 200% of specified max. value Less than specified max. value STANDARD PRODUCTS AND CASE SIZES Dφ x L (mm) PART NUMBER NSPE-TZ820M16V6.3X6.3NBYF Case Size (D X L) mm 6.3X6.3 Cap. Working Max. Tan δ Max. ESR (mΩ) (μF) Voltage 120Hz/20°C @ 100KHz/20°C 82 0.16 Max. Ripple Current (mA rms) @ 100KHz/125°C 38 1320 Load Life Hours (+125°C) 1500 NSPE-TZ121M16V6.3X8NBYF 6.3X8 120 NSPE-TZ271M16V8X10.8NBYF 8X10.8 270 NSPE-TZ471M16V10X10.8NBYF 10X10.8 470 0.16 18 2620 2500 NSPE-TZ561M16V10X12.8NBYF 10X12.8 560 0.16 14 3030 2500 NSPE-TZ470M25V6.3X6.3NBYF 6.3X6.3 47 0.16 40 1260 1500 NSPE-TZ680M25V6.3X8NBYF 6.3X8 68 0.16 35 1380 2000 16 25 0.16 32 1440 1500 0.16 23 1970 2500 NSPE-TZ151M25V8X10.8NBYF 8X10.8 150 0.16 25 1880 3000 NSPE-TZ271M25V10X10.8NBYF 10X10.8 270 0.16 19 2500 3000 NSPE-TZ331M25V10X12.8NBYF 10X12.8 330 0.16 14 2890 3000 NSPE-TZ270M35V6.3X6.3NBYF 6.3X6.3 27 0.16 50 1070 1500 NSPE-TZ470M35V6.3X8NBYF 6.3X8 47 0.16 45 1280 2000 NSPE-TZ101M35V8X10.8NBYF 8X10.8 100 0.16 28 1780 3000 NSPE-TZ151M35V10X10.8NBYF 10X10.8 150 35 0.16 20 2440 3000 NSPE-TZ221M35V10X12.8NBYF 10X12.8 220 0.16 15 2800 3000 NSPE-TZ180M40V6.3X6.3NBYF 6.3X6.3 18 0.16 55 1050 1500 NSPE-TZ270M40V6.3X8NBYF 6.3X8 27 0.16 48 1230 2000 NSPE-TZ560M40V8X10.8NBYF 8X10.8 56 0.16 30 1710 3000 NSPE-TZ101M40V10X10.8NBYF 10X10.8 100 40 0.16 21 2360 3000 NSPE-TZ121M40V10X12.8NBYF 10X12.8 120 0.16 16 2700 3000 RIPPLE CURRENT FREQUENCY CORRECTION FACTOR Frequency C < 4.7 4.7 < C < 33 33 < C 120Hz 0.03 0.05 0.10 1KHz 0.30 0.32 0.35 NIC COMPONENTS CORP. www.niccomp.com 10KHz 0.65 0.67 0.70 >100KHz 1.00 1.00 1.00 www.lowESR.com www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com 1 Hybrid Aluminum Electrolytic Capacitors NSPE-TZ Series PART NUMBER SYSTEM NSPE-TZ 101 M 35V 8x10.8 N B Y F RoHS Compliant B = Sn-Bi Finish, 13" Reel LB = Sn-Bi Finish, 15" Reel Reflow Temp. Code (N=+260°C) Size in mm Working Voltage Tolerance Code M=20% Capacitance Code in μF, first 2 digits are significant Third digit is no. of zeros Series Suitable for automotive equipment, sourced to special production and inspection at TS-16949 certified production site DIMENSIONS (mm) Case Size 6.3x6.3 6.3x8 8x10.8 10x10.8 10x12.8 Dφ ±0.5 6.3 6.3 8 10 10 L max. 6.3 8 10.8 10.8 12.8 A, B ±0.2 6.6 6.6 8.3 10.3 10.3 W 0.5 ~ 0.8 0.5 ~ 0.8 0.7 ~ 1.0 1.0 ~ 1.4 1.0 ~ 1.4 + Dφ I ±0.3 2.5 2.5 2.9 3.2 3.2 I Series Code R 68 25V - I Part Marking Polarity (Cathode) P ±0.2 2.2 2.2 3.2 4.6 4.6 Date Code Capacitance Voltage Code W A L 0.3mm max. P B LAND PATTERN DIM. (mm) Case Dia. 6.3 8 10 a 1.8 2.8 4.3 b 3.6 4.1 4.4 c 1.8 2.1 2.5 + c b 2 NIC COMPONENTS CORP. www.niccomp.com a www.lowESR.com c www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE www.SMTmagnetics.com Hybrid Aluminum Electrolytic Capacitors NSPE-TZ Series Temperature - Deg. C RECOMMENDED REFLOW SOLDERING PROFILE* Peak Temperature 260 230 Time Above 230°C (40 seconds max.) Time Above 217°C (80 seconds max.) 200 150 Time Above 200°C (100 seconds max.) 100 Preheat - +160°C for 120 seconds max. 50 Time (Seconds) PEAK TEMPERATURE AND DURATION Diameter φ6.3 ~ 10mm Peak Temperature (5 seconds max.) +260°C Time above 230°C 40 sec. max. Time above Time above 217°C 200°C 80 sec. max. 100 sec. max. *Two reflow passes are permissible with a cool down to room temperature required between the first and second pass. Acceptable soldering methods are IR or IR & heated air. Capacitors placed on a +250°C hot plate for 30 seconds with their electrode terminals facing downward will fulfill the following conditions Resistance to after being cooled to room temperature Capacitance Change Within ± 10% of the initial measured value Soldering Heat Dissipation Factor Less than maximum specified value Leakage Current Less than maximum specified value ESR Less than 130% of maximum specified value TAPING SPECIFICATIONS (mm) 1. Both Leader and Trailer tape: Minimum 40mm (1.57") empty carrier tape pockets. 2. Leader tape: Approximately 20cm of cover tape at leader. 4 + 0.1 3. Connection: Maximum 3 connections (slices) per reel. D ±0.1 7.5 7.5 11.5 11.5 11.5 P ±0.1 12.0 12.0 16.0 16.0 16.0 T ±0.2 6.5 8.2 11.1 11.2 13.3 t max. 0.6 0.6 0.6 0.6 0.6 6.3x6.3 6.3x8 8x10.8 10x10.8 10x12.8 W ±1.0 18 18 26 26 26 + A P Feeding T 2mm ± 0.5mm REEL DIMENSIONS (mm) Case Size - B C ±0.3 16.0 16.0 24.0 24.0 24.0 D B ±0.5 7.0 7.0 8.7 10.7 10.7 t Qty per Reel 13" (330mm) 15" (380mm) 800 1,000 500 900 300 500 300 500 300 400 φ13mm ± 0.5mm φ50mm min. 6.3x6.3 6.3x8 8x10.8 10x10.8 10x12.8 A ±0.5 7.0 7.0 8.7 10.7 10.7 1.75 ± C Case Size 1.75 + 0.15 1.5∅ +0.1/1.5φ+0.1/-0 φ21mm ± 0.8mm φ330mm ± 2.0mm φ380mm ± 2.0mm NIC COMPONENTS CORP. www.niccomp.com www.lowESR.com W www.RFpassives.com SPECIFICATIONS ARE SUBJECT TO CHANGE 3mm www.SMTmagnetics.com 3