MDE ICTE-10C Glass passivated junction transient voltage suppressor Datasheet

MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414
1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com
ICTE5.0 to ICTE15C MPTE-5 to MPTE-45
1N6373 to 1N6381 and 1N6382 to 1N6389
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
STANDOFF VOLTAGE- 5.0 to 45.0V
1500 Watt Peak Power
FEATURES
• Plastic package has Underwriters Laboratory
Flammability Classification 94 V-O
• Glass passivated chip junction in Molded Plastic package
• 1500W surge capability at 1ms
• Excellent clamping capability
• Low zener inpedance
• Fast response time: typically less than
1.0 ps from 0 volts to BV min.
• Typical IR less than 1µA above 10V
• High temperature soldering guaranteed:
250°C/10 seconds/ .375", (9.5mm) lead
length, 5lbs., (2.3kg) tension
• Includes 1N6373 thru 1N6385
MECHANICAL DATA
Case: JEDEC DO-201 Molded plastic
Terminals: Plated Axial leads, solderable per
MIL-STD-750, Method 2026
Polarity: Color band denoted positive end (cathode)
except Bipolar
Mounting Position: Any
Weight: 0.045 ounces, 1.2 grams
MAXIMUM RATINGS AND CHARACTERISTICS
Ratings at 25°C ambient temperature unless otherwise specified.
RATING
Peak Pulse Power Dissipation at TA = 25 °C, TP = 1ms
(NOTE 1)
Peak Pulse Current of on 10/1000 µs waveform (Note 1)
Steady State Power Dissipation at T L = 75°C
Lead lengths .375", 9.5mm (Note 2)
Peak Forward Surge Current, 8.3ms Single Half Sine-wave
Superimposed on Rated Load, (JEDEC Method)(Note 3)
Maximum instantaneous forward voltage at 100A for
unidirectional only
Operatings and Storage Temperature Range
SYMBOL
VALUE
UNITS
PPPM
Minimum 1500
Watts
IPPM
SEE TABLE 1
Amps
PM (AV)
5.0
Watts
IFSM
200
Amps
VF
3.5
Volt
TJ, TSTG
-55 +175
°C
NOTES:
1. Non-repetitive current pulse, per Fig.3 and derated above Ta=25 °C per Fig.2.
2. Mounted on Copper Pad area of 0.8x0.8" (20x20mm) per Fig.5.
3. 8.3ms single half sine-wave, or equivalent square wave, Duty cycle=4 pulses per minutes maximum.
Certified RoHS Compliant
UL File # E223026
MDE Semiconductor, Inc.
78-150 Calle Tampico, Unit 210, La Quinta, CA., USA 92253 Tel : 760-564-8656 • Fax : 760-564-2414
1-800-831-4881 Email: [email protected] Web: www.mdesemiconductor.com
ICTE5.0 to ICTE15C MPTE-5 to MPTE-45
1N6373 to 1N6381 and 1N6382 to 1N6389
GLASS PASSIVATED JUNCTION TRANSIENT VOLTAGE SUPPRESSOR
STANDOFF VOLTAGE- 5.0 to 45.0V
1500 Watt Peak Power
Part Numbers
MINIMUM
REVERSE
MINIMUM
MAXIMUM
CLAMPING
STANDOFF BREAKDOWN REVERSE
VOLTAGE
VOLTAGE
VOLTAGE
LEAKAGE
(Vc) @
(VRWM)
VBR @ 1mA
IR @ Vr
Ipp=1A
(V)
(Volts)
(µA)
(Volts)
MAXIMUM
CLAMPING
VOLTAGE
(Vc) @
Ipp=1A
(Volts)
MAXIMUM
PEAK
PULSE
CURRENT
Ipp (A)
ICTE-5*
ICTE-8
ICTE-10
ICTE-12
ICTE-15
ICTE-18
ICTE-22
ICTE-36
ICTE-45
1N6373
1N6374
1N6375
1N6376
1N6377
1N6378
1N6379
1N6380
1N6381
MPTE-5*
MPTE-8
MPTE-10
MPTE-12
MPTE-15
MPTE-18
MPTE-22
MPTE-36
MPTE-45
5*
8.0
10.0
12.0
15.0
18.0
22.0
36.0
45.0
6.0
9.4
11.7
14.1
17.6
21.2
25.9
42.4
52.9
300.0
25.0
2.0
2.0
2.0
2.0
2.0
2.0
2.0
7.1
11.3
13.7
16.1
20.1
24.2
29.8
50.6
63.3
7.5
11.5
14.1
16.5
20.6
25.2
32.0
54.3
70.0
160.0
100.0
90.0
70.0
60.0
50.0
40.0
23.0
19.0
ICTE-8C
ICTE-10C
ICTE-12C
ICTE-15C
ICTE-18C
ICTE-22C
ICTE-36C
ICTE-45C
1N6382
1N6383
1N6384
1N6385
1N6386
1N6387
1N6388
1N6389
MPTE-8C
MPTE-10C
MPTE-12C
MPTE-15C
MPTE-18C
MPTE-22C
MPTE-36C
MPTE-45C
8.0
10.0
12.0
15.0
18.0
22.0
36.0
45.0
9.4
11.7
14.1
17.6
21.2
25.9
42.4
52.9
50
2.0
2.0
2.0
2.0
2.0
2.0
2.0
11.4
14.1
16.7
20.8
24.8
30.8
50.6
63.3
11.6
14.5
17.1
21.4
25.5
32.0
54.3
70.0
100.0
90.0
70.0
60.0
50.0
40.0
23.0
19.0
*ICTE-5 is not available in Bi-directional.
Certified RoHS Compliant
UL File # E223026
Suffix 'C' denotes Bi-directional device.
Similar pages