Shielded Inductors - Axial CTS6F Series ctparts.com SPECIFICATIONS Please specify tolerance code when ordering. CTS6F-251_ K = ±10%, M = ±20% From 250 µH to 1,000 µH Inductance (µH) L Test Freq. (kHz) INCR Curr. (mA) DCR Max. Ω) (Ω CTS6F-251_ CTS6F-501_ 250 500 1.0 1.0 60 44 0.17 0.39 1330 880 CTS6F-102_ 1000 1.0 30 0.80 610 Part Number D.C. Curr (mA) Not shown at actual size. PHYSICAL DIMENSIONS Size mm inches A B C Max. Max. Typ. 13.5 ± 0.25 6.86 ± 0.25 29.2 0.6430 0.53 ± 0.010 0.27 ± 0.010 1.15 0.02535 RoHS Compliant CHARACTERISTICS Description: Axial leaded molded (shielded) inductor Applications: Used for high reliability applications. Vital for telecommunication applications. Ideal for various RF applications Operating Temperature: -20°C to +80°C Inductance Tolerance: ±10% & ±20% Current Rating: Based on 0.43 watt power dissipation for approximately 20°C temperature rise Packaging: Bulk Pack, 200 pieces per bag, Tape & Reel, 1,000 pieces per reel Marking: Printed with inductance code Miscellaneous: RoHS Compliant. Testing: Inductance is measured on an HP4285A at 1 kHz Leads: Soft copper and pre-tinned Incremental Current: The current at which the inductance will be decreased by 5% from its initial (Zero DC) value Additional Information: Additional electrical & physical information available upon request Samples available. See website for ordering information. Technologies 12.27.05 CENTRAL 22 AWG Manufacturer of Inductors, Chokes, Coils, Beads, Transformers & Toroids 800-684-5322 Inside US 949-453-1811 Outside US Copyright © 2005 by CT Magnetics, DBA Central Technologies. All rights reserved. CT Magnetics reserves the right to make improvements or change specifications without notice