E-Series Surface Mount Mixer 0.5 - 500 MHz EMRS-1LH V3.00 Features ● ● ● SM-1 LO Power: +10 dBm Up to +5 dBm RF Surface Mount Specifications @ 25°C Frequency Range RF LO IF 0.5 - 500 MHz 0.5 - 500 MHz DC - 500 MHz Conversion Loss (dB) 1 - 250 MHz 0.5 - 500 MHz Typical 5.7 6.0 Maximum 7.0 8.0 Isolation (dB) LO to RF 0.5 - 5 MHz 5 - 250 MHz 250 - 500 MHz LO to IF 0.5 - 5 MHz 5 - 250 MHz 250 - 500 MHz Typical Minimum 58 44 30 45 25 20 55 40 28 40 25 17 Operating Characteristics Impedance Dimensions in ( ) are in mm. Unless Otherwise Noted: .x = ±0.04 (1.00) .xx = ±0.02 (0.50) .xxx = ±0.010 (0.250) 50 Ohms Nominal RF input for 1dB Compression + 5 dBm Ordering Information Part No. EMRS-1LH EMRS-1LHTR Pin Configuration Packaging Tubes Forward Tape & Reel Absolute Maximum Ratings Parameter Absolute Maximum RF Power 50 mW Peak IF Current 40 mA Storage Temperature -55°C to 100°C Operating Temperature -55°C to 100°C Pin Temperature (10 Seconds) 260°C Function LO RF IF Ground Pin No. 1 4 5 2,3,6 S 0064 B Specifications Subject to Change Without Notice. M/A-COM, Inc. North America: 1 Tel. (800) 366-2266 Fax (800) 618-8883 ■ Asia/Pacific: Tel. +81 (03) 3226-1671 Fax +81 (03) 3226-1451 ■ Europe: Tel. +44 (1344) 869 595 Fax +44 (1344) 300 020