SOLID TANTALUM CHIP CAPACITORS T493 SERIES—Military COTS Features FEATURES • Standard Cases Sizes A - X per EIA535BAAC • Termination Finishes offered per MIL-PRF-55365: Gold Plated, Hot Solder Dipped, Solder Plated, Solder Fused, 100% Tin • Weibull Grading Available: B (0.1%/1000hrs) and C (0.01%/1000hrs) • Surge Current Testing Available per MIL-PRF-55365: 10 cycles @ +25°C; 10 cycles @ -55°C and +85°C • Standard and Low ESR Options • Operating Temperature Range: -55°C to +125°C • Capacitance: 0.1 to 330µF • Voltage: 4 to 50 Volts OUTLINE Outline DRAWING Drawing CATHODE (-) END VIEW SIDE VIEW ANODE (+) END VIEW B W BOTTOM VIEW B H E K F T X S G S A L Termination Notch at KEMETs Option, Either End DIMENSIONS(INCHES) Dimensions MILLIMETERS - Millimeters (Inches) Case Size Case Size KEMET EIA KEMET EIA/IECQ A A B B 3216-18 3216-18 C C D D X X E L L 3.2 ± 0.2 (.126 3.2 ±± .008) 0.2 W H W K ±0.20 H 1.6 ± 0.2 1.6 ± 0.2 0.9 (.0631.6 ± .008) (.035) ± 0.2(.063 ± .008) 1.6 ± 0.2 3528-21 3.5 ± 0.2 2.8 ± 0.2 1.9 ± 0.1 1.1 (.126 ± .008) (.063 ± .008) (.063 ± .008) (.138 ± .008) (.110 ± .008) (.075 ± .008) (.043) 3.5 ± 0.2 2.8 ± 0.2 1.9 ± 0.2 6032-28 6.0 ± 0.3 3.2 ± 0.3 2.5 ± 0.3 1.4 (.138 ± .008) (.110 ± .008) (.075 ± .008) (.236 ± .012) (.126 ± .12) .098 ± .012) (.055) 6032-28 6.0 0.3 ± 0.3 2.8 ± 0.3 2.5 ± 0.3 7343-31 7.3 ± ± 0.3 4.33.2 ± 0.3 1.5 (.236 .012) (.169 (.126 ± .012) (.287 ± ± .012) ± .012) (.110 (.098 ± .012) ± .012) (.059) 7343-31 7.3 0.3 ± 0.3 4.0 ± 0.3 2.8 ± 0.3 7343-43 7.3 ± ± 0.3 4.34.3 ± 0.3 2.3 (.287 ± .012) ± .012) (.157 (.110 ± .012) ± .012) (.091) (.287 .012) (.169 (.169 ± .012) 7260-38 7.3 ± ± 0.3 6.04.3 ± 0.3 2.3 7343-43 7.3 0.3 ± 0.3 3.6 ± 0.2 4.0 ± 0.3 (.287 ± ± .012) (.142 (.157 ± .008) ± .012) (.091) (.287 .012) (.236± (.169.012) ± .012) 3528-21 Notes: B ±0.15±0.3 B ±0.15 P (Ref) R (Ref) F±0.20 ±0.1 S ±0.3 ±0.1 X (Ref) (Ref) ±(.006) K ±(.008) F ±(.004) S ±(.012) (Ref) ±.006 X(Ref) 1.2 0.8 (.047) 0.9(.031)1.2 2.2 (.035) (.087) 1.1 2.2 (.043) (.087) 1.4 2.4 (.055) (.094) 1.5 2.4 (.094) (.059) 4.1 2.3 (.161) (.091) 0.4 (.016)0.8 0.10 ± 0.10 (.004 ± .004) 0.4 0.8 0.10 (.047) 0.4(.031) 0.10 ±(.016) (.031) (.016) (.004 ± .004) 2.2 1.3 (.087) (.051) 1.3 2.2 (.087) (.051) 1.3 2.4 (.051) (.094) 1.3 2.4 (.051) (.094) 0.8 0.4 0.5 0.10 ± 0.10 (.031) (.004 ±(.016) (.020) .004) 0.5 0.5 1.3 0.10 ± 0.10 (.051) (.004 ±(.020) (.020) .004) 1.30.10 ± 0.10 0.5 0.5 (.020) .004) (.051) (.004 ±(.020) 0.5 1.3 0.10 ± 0.10 0.5 (.020) (.051) (.004 ±(.020) .004) 0.4 0.4 (.016) 0.10 ±(.016) 0.10 0.5 (.004 ± 1.0 .004) (.020) (.039) A (Min) G (Ref) 1.4 (.055) 0.13 2.1 (.005) (.083) 0.10 ± 0.10 0.13 0.9 1.0 3.1 (.004 ± .004) (.005) (.0235) (.039) (.122) 0.10 0.13 0.90.10 ± 1.0 3.8 (.004 ±(.039) .004) (.005) (.0235) (.150) 0.10 0.13 1.7 1.0± 0.10 3.8 (.067) (.150) (.004 ±(.039) .004) (.005) 0.90.10 ± 1.0 3.8 0.10 0.13 (.035) (.004 (.039) ± .004) (.150) (.005) 1.1 (.043) COMPONENT ComponentMARKING Marking Rated Voltage 22 + 336 20 K 515 315 1.3 1.4(.051) 1.1 1.3 1.8 (.055)2.2 (.043) (.051) (.071) 2.1(.087) 1.8 2.2 2.8 2.4 (.083) (.071) (.087) (.110) (.094) 3.1 2.8 2.4 3.5 3.5 (.110) (.138)(.122) (.138) (.094) 3.8 3.5 3.5 3.5 3.5 (.138) (.138) (.138) (.138) (.150) 3.5 3.5 3.5 3.5 3.8 (.138) (.138) (.138) (.150) (.138) 1. Metric dimensions govern. 2. (ref) - Dimensions provided for reference only. (+) KEMET T493 COTS E (Ref) T(Ref) A(Min) G(ref) E(ref) Polarity Indicator Picofarad Code KEMET ID Print Week Code 1st Digit = Year 2nd & 3rd Digit + Week 315==15th 15th week Weekof of 2005 2003 “515 ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 SOLID TANTALUM CHIP CAPACITORS Solid Tantalum Surface Mount T493 SERIES—Military COTS ORDERING INFORMATION T 493 D 227 K 006 C H 6120 Tantalum ESR/Surge Designator First 2 Numbers 61 = Surge - None 62 = Surge - 10 Cycles, +25°C 64 = Surge - 10 cycles, -55°C and +85°C Series T493 Military Commercial Off-The-Shelf Case Size A, B, C, D, X First two digits represent significant figures. Third digit specifies number of zeros to follow. Second 2 Numbers 10 = ESR - Standard 20 = ESR - Low 30 = ESR - Ultra-low Capacitance Tolerances Note: Capacitance Picofarad Code M = ±10% K = ±10% J = ±5% (For 5% tolerance contact KEMET sales rep.) For order entry purposes the last 4-digits of the part number will be entered in the KEMET Customer Specification (C-Spec)Field. Termination Finish B - Gold plated C - Hot solder dipped H - Solder plated K - Solder fused T - 100% Tin Voltage As shown Reliability Level A = Non-ER; B = 0.1%/K hrs.; C = 0.01%/K hrs. T493 RATINGS AND PART NUMBER REFERENCE CapaciCapaci- Case Case tance tance Size Size μF µF 2.2 2.2 3.3 3.3 4.7 4.7 6.8 6.8 6.8 6.8 10.010.0 10.010.0 15.015.0 15.015.0 22.022.0 22.022.0 22.022.0 33.033.0 33.033.0 33.033.0 47.047.0 47.047.0 68.068.0 68.068.0 68.068.0 #100.0 #100.0 100.0 100.0 100.0 100.0 #150.0 #150.0 150.0 150.0 220.0 220.0 330.0 330.0 330.0 330.0 A A A A B A B A B A B C A B C B C B C D *B C D *C D D D X A A A A B A B A B A B C A B C B C B C D B C D C D D D X 1.5 1.5 2.2 2.2 3.3 3.3 4.7 4.7 4.7 4.7 6.8 6.8 6.8 6.8 10.010.0 10.010.0 15.015.0 15.015.0 15.015.0 22.022.0 22.022.0 22.022.0 A A A A B A B A B A B C A B C A A A A B A B A B A B C A B C KEMET KEMET PartPart Number Number Std. ESR Std. ESR Low LowESR ESR DCL DCL DF % DF % Ohms Ohms Ohms Ohms μA @µA @@ +25ºC @ +25ºC @+25°C @+25°C @+25°C @+25°C 25ºC 25ºC 120 120 Hz Hz 100100 kHzkHz 100 100kHz kHz Max Max MaxMax Max Max Max Max 4 4Volt VoltRating Ratingatat+85ºC +85ºC(2.7 (2.7Volt VoltRating Ratingatat+125ºC) +125ºC) T493A225(1)004(2)(3)(4)(5) 0.5 0.5 6.0 6.0 8.08.0 T493A225(1)004(2)(3)(4)(5) T493A335(1)004(2)(3)(4)(5) 0.5 0.5 6.0 6.0 8.08.0 T493A335(1)004(2)(3)(4)(5) T493A475(1)004(2)(3)(4)(5) 0.5 0.5 6.0 6.0 8.08.0 T493A475(1)004(2)(3)(4)(5) T493A685(1)004(2)(3)(4)(5) 0.5 0.5 6.0 6.0 6.06.0 T493A685(1)004(2)(3)(4)(5) T493B685(1)004(2)(3)(4)(5) 0.5 0.5 6.0 6.0 5.55.5 T493B685(1)004(2)(3)(4)(5) T493A106(1)004(2)(3)(4)(5) 0.5 0.5 6.0 6.0 6.06.0 T493A106(1)004(2)(3)(4)(5) T493B106(1)004(2)(3)(4)(5) 0.5 0.5 6.0 6.0 3.53.5 T493B106(1)004(2)(3)(4)(5) T493A156(1)004(2)(3)(4)(5) 0.6 0.6 6.0 6.0 4.04.0 T493A156(1)004(2)(3)(4)(5) T493B156(1)004(2)(3)(4)(5) 0.6 0.6 6.0 6.0 3.53.5 T493B156(1)004(2)(3)(4)(5) T493A226(1)004(2)(3)(4)(5) 0.9 0.9 6.0 6.0 4.04.0 T493A226(1)004(2)(3)(4)(5) T493B226(1)004(2)(3)(4)(5) 0.9 0.9 6.0 6.0 3.53.5 T493B226(1)004(2)(3)(4)(5) T493C226(1)004(2)(3)(4)(5) 0.9 0.9 6.0 6.0 1.81.8 T493C226(1)004(2)(3)(4)(5) T493A336(1)004(2)(3)(4)(5) 1.3 1.3 6.0 6.0 4.04.0 T493A336(1)004(2)(3)(4)(5) T493B336(1)004(2)(3)(4)(5) 1.3 1.3 6.0 6.0 3.53.5 T493B336(1)004(2)(3)(4)(5) T493C336(1)004(2)(3)(4)(5) 1.3 1.3 6.0 6.0 1.81.8 T493C336(1)004(2)(3)(4)(5) T493B476(1)004(2)(3)(4)(5) 1.9 1.9 6.0 6.0 3.03.0 T493B476(1)004(2)(3)(4)(5) T493C476(1)004(2)(3)(4)(5) 1.9 1.9 6.0 6.0 1.81.8 T493C476(1)004(2)(3)(4)(5) T493B686(1)004(2)(3)(4)(5) 2.7 2.7 6.0 6.0 3.53.5 T493B686(1)004(2)(3)(4)(5) T493C686(1)004(2)(3)(4)(5) 2.7 2.7 6.0 6.0 1.61.6 T493C686(1)004(2)(3)(4)(5) T493D686(1)004(2)(3)(4)(5) 2.7 2.7 6.0 6.0 0.80.8 T493D686(1)004(2)(3)(4)(5) T493B107(1)004(2)(3)(4)(5) 4.0 4.0 8.0 8.0 1.01.0 T493B107(1)004(2)(3)(4)(5) T493C107(1)004(2)(3)(4)(5) 4.0 4.0 8.0 8.0 1.21.2 T493C107(1)004(2)(3)(4)(5) T493D107(1)004(2)(3)(4)(5) 4.0 4.0 8.0 8.0 0.80.8 T493D107(1)004(2)(3)(4)(5) T493C157(1)004(2)(3)(4)(5) 6.0 6.0 8.0 8.0 1.21.2 T493C157(1)004(2)(3)(4)(5) T493D157(1)004(2)(3)(4)(5) T493D157(1)004(2)(3)(4)(5) 6.0 6.0 8.0 8.0 0.80.8 T493D227(1)004(2)(3)(4)(5) T493D227(1)004(2)(3)(4)(5) 8.8 8.8 8.0 8.0 0.90.9 T493D337(1)004(2)(3)(4)(5) T493D337(1)004(2)(3)(4)(5) 13.2 13.2 8.0 8.0 0.70.7 T493X337(1)004(2)(3)(4)(5) T493X337(1)004(2)(3)(4)(5) 13.2 13.2 8.0 8.0 0.50.5 VoltRating Ratingatat+85ºC +85ºC(4(4Volt VoltRating Ratingatat+125ºC) +125ºC) 6 6Volt T493A155(1)006(2)(3)(4(5) T493A155(1)006(2)(3)(4(5) 0.5 0.5 6.0 6.0 8.08.0 T493A225(1)006(2)(3)(4)(5) T493A225(1)006(2)(3)(4)(5) 0.5 0.5 6.0 6.0 8.08.0 T493A335(1)006(2)(3)(4)(5) T493A335(1)006(2)(3)(4)(5) 0.5 0.5 6.0 6.0 8.08.0 T493A475(1)006(2)(3)(4)(5) T493A475(1)006(2)(3)(4)(5) 0.5 0.5 6.0 6.0 6.06.0 T493B475(1)006(2)(3)(4)(5) T493B475(1)006(2)(3)(4)(5) 0.5 0.5 6.0 6.0 5.55.5 T493A685(1)006(2)(3)(4)(5) T493A685(1)006(2)(3)(4)(5) 0.5 0.5 6.0 6.0 6.06.0 T493B685(1)006(2)(3)(4)(5) T493B685(1)006(2)(3)(4)(5) 0.5 0.5 6.0 6.0 3.53.5 T493A106(1)006(2)(3)(4)(5) T493A106(1)006(2)(3)(4)(5) 0.6 0.6 6.0 6.0 4.04.0 T493B106(1)006(2)(3)(4)(5) T493B106(1)006(2)(3)(4)(5) 0.6 0.6 6.0 6.0 3.53.5 T493A156(1)006(2)(3)(4)(5) T493A156(1)006(2)(3)(4)(5) 0.9 0.9 6.0 6.0 4.04.0 T493B156(1)006(2)(3)(4)(5) T493B156(1)006(2)(3)(4)(5) 0.9 0.9 6.0 6.0 3.53.5 T493C156(1)006(2)(3)(4)(5) T493C156(1)006(2)(3)(4)(5) 0.9 0.9 6.0 6.0 1.81.8 T493A226(1)006(2)(3)(4)(5) T493A226(1)006(2)(3)(4)(5) 1.4 1.4 6.0 6.0 4.04.0 T493B226(1)006(2)(3)(4)(5) T493B226(1)006(2)(3)(4)(5) 1.4 1.4 6.0 6.0 3.53.5 T493C226(1)006(2)(3)(4)(5) T493C226(1)006(2)(3)(4)(5) 1.4 1.4 6.0 6.0 1.81.8 Ultra-Low Ultra-Low ESR, ESR, Ohms Ohms @+25°C @+25°C 100 100 kHz kHz Max Max 6.0 6.0 4.0 4.0 3.5 3.5 3.0 3.0 2.0 2.0 2.0 2.0 1.2 1.2 1.5 1.5 1.2 1.2 1.5 1.5 0.6 0.6 0.5 0.5 3.0 3.0 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 2.0 2.0 0.25 0.25 0.2 0.2 0.7 0.7 0.2 0.2 0.2 0.2 0.3 0.3 0.15 0.15 0.7 0.7 0.15 0.15 0.2 0.2 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 0.50 0.50 N/A N/A N/A N/A 0.25 0.25 N/A N/A N/A N/A N/A N/A N/A N/A 6.0 6.0 6.0 6.0 6.0 6.0 3.5 3.5 3.5 3.5 2.0 2.0 1.2 1.2 2.0 2.0 1.0 1.0 1.5 1.5 0.7 0.7 0.6 0.6 3.0 3.0 0.6 0.6 0.5 0.5 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A (1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5% tolerance,contact KEMET sales representative. (2) To complete KEMET part number, insert A for Non-ER; B for 0.1%/1000 Hrs.; or C for 0.01%/1000 Hrs. Reliability Level. (3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 µ inch minimum Termination Finish or T for 100% Tin. (4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10 cycles, -55°C & +85°C. (5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option. * Extended Values #Maximum Capacitance Change @ 125°C = +15% ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300* 23 SOLID TANTALUM CHIP CAPACITORS T493 SERIES—Military COTS T493 RATINGS AND PART NUMBER REFERENCE 24 Capacitance µF Case Size 33.0 33.0 47.0 47.0 47.0 68.0 68.0 68.0 #100.0 100.0 100.0 #150.0 150.0 #220.0 220.0 220.0 330.0 330.0 1.0 1.5 2.2 3.3 3.3 4.7 4.7 6.8 6.8 10.0 10.0 10.0 #15.0 15.0 15.0 22.0 22.0 33.0 33.0 33.0 47.0 47.0 68.0 68.0 68.0 #100.0 100.0 150.0 150.0 #220.0 220.0 330.0 B C B C D B C D B C D C D C D X D X A A A A B A B A B A B C A B C B C B C D C D C D X C D D X D X X 0.68 1.0 1.5 2.2 3.3 3.3 4.7 4.7 #6.8 6.8 6.8 10.0 10.0 #15.0 15.0 #22.0 22.0 22.0 A A A A A B A B A B C B C B C B C D KEMET Part Number DCL µA @ 25ºC Max DF % @ +25ºC 120 Hz Max Std. ESR Ohms @+25°C 100 kHz Max 6 Volt Rating at +85ºC (4 Volt Rating at +125ºC) cont. T493B336(1)006(2)(3)(4)(5) 2.0 6.0 3.0 T493C336(1)006(2)(3)(4)(5) 2.0 6.0 1.8 T493B476(1)006(2)(3)(4)(5) 2.9 6.0 3.5 T493C476(1)006(2)(3)(4)(5) 2.9 6.0 1.6 T493D476(1)006(2)(3)(4)(5) 2.9 6.0 0.8 T493B686(1)006(2)(3)(4)(5) 4.1 8.0 1.0 T493C686(1)006(2)(3)(4)(5) 4.1 6.0 1.2 T493D686(1)006(2)(3)(4)(5) 4.1 6.0 0.8 T493B107(1)006(2)(3)(4)(5) 6.3 15.0 10.0 T493C107(1)006(2)(3)(4)(5) 6.0 8.0 1.2 T493D107(1)006(2)(3)(4)(5) 6.0 8.0 0.8 T493C157(1)006(2)(3)(4)(5) 9.0 8.0 1.2 T493D157(1)006(2)(3)(4)(5) 9.0 8.0 0.7 T493C227(1)006(2)(3)(4)(5) 13.2 10.0 1.2 T493D227(1)006(2)(3)(4)(5) 13.2 8.0 0.7 T493X227(1)006(2)(3)(4)(5) 13.2 8.0 0.7 T493D337(1)006(2)(3)(4)(5) 19.8 8.0 0.5 T493X337(1)006(2)(3)(4)(5) 19.8 8.0 0.5 T493A105(1)010(2)(3)(4)(5) 0.5 4.0 10.0 T493A155(1)010(2)(3)(4)(5) 0.5 6.0 8.0 T493A225(1)010(2)(3)(4)(5) 0.5 6.0 8.0 T493A335(1)010(2)(3)(4)(5) 0.5 6.0 6.0 T493B335(1)010(2)(3)(4)(5) 0.5 6.0 5.5 T493A475(1)010(2)(3)(4)(5) 0.5 6.0 6.0 T493B475(1)010(2)(3)(4)(5) 0.5 6.0 3.5 T493A685(1)010(2)(3)(4)(5) 0.7 6.0 6.0 T493B685(1)010(2)(3)(4)(5) 0.7 6.0 3.5 T493A106(1)010(2)(3)(4)(5) 1.0 6.0 4.0 T493B106(1)010(2)(3)(4)(5) 1.0 6.0 3.5 T493C106(1)010(2)(3)(4)(5) 1.0 6.0 1.8 T493A156(1)010(2)(3)(4)(5) 1.5 8.0 6.0 T493B156(1)010(2)(3)(4)(5) 1.5 6.0 3.5 T493C156(1)010(2)(3)(4)(5) 1.5 6.0 1.8 T493B226(1)010(2)(3)(4)(5) 2.2 6.0 3.0 T493C226(1)010(2)(3)(4)(5) 2.2 6.0 1.8 T493B336(1)010(2)(3)(4)(5) 3.3 6.0 3.5 T493C336(1)010(2)(3)(4)(5) 3.3 6.0 1.6 T493D336(1)010(2)(3)(4)(5) 3.3 6.0 0.8 T493C476(1)010(2)(3)(4)(5) 4.7 6.0 1.2 T493D476(1)010(2)(3)(4)(5) 4.7 6.0 0.8 T493C686(1)010(2)(3)(4)(5) 6.8 6.0 1.2 T493D686(1)010(2)(3)(4)(5) 6.8 6.0 0.8 T493X686(1)010(2)(3)(4)(5) 5.4 4.0 0.5 T493C107(1)010(2)(3)(4)(5) 10.0 8.0 1.2 T493D107(1)010(2)(3)(4)(5) 10.0 8.0 0.7 T493D157(1)010(2)(3)(4)(5) 15.0 8.0 0.7 T493X157(1)010(2)(3)(4)(5) 15.0 8.0 0.7 T493D227(1)010(2)(3)(4)(5) 22.0 8.0 0.5 T493X227(1)010(2)(3)(4)(5) 22.0 8.0 0.5 T493X337(1)010(2)(3)(4)(5) 33.0 10.0 0.5 16 Volt Rating at +85ºC (10 Volt Rating at +125ºC) T493A684(1)016(2)(3)(4)(5) 1.1 6.0 12.0 T493A105(1)016(2)(3)(4)(5) 0.5 4.0 10.0 T493A155(1)016(2)(3)(4)(5) 0.5 6.0 8.0 T493A225(1)016(2)(3)(4)(5) 0.5 6.0 6.0 T493A335(1)016(2)(3)(4)(5) 0.5 6.0 6.0 T493B335(1)016(2)(3)(4)(5) 0.5 6.0 3.5 T493A475(1)016(2)(3)(4)(5) 0.8 6.0 6.0 T493B475(1)016(2)(3)(4)(5) 0.8 6.0 3.5 T493A685(1)016(2)(3)(4)(5) 1.1 6.0 7.0 T493B685(1)016(2)(3)(4)(5) 1.1 6.0 3.5 T493C685(1)016(2)(3)(4)(5) 1.1 6.0 1.9 T493B106(1)016(2)(3)(4)(5) 1.6 6.0 3.5 T493C106(1)016(2)(3)(4)(5) 1.6 6.0 1.8 T493B156(1)016(2)(3)(4)(5) 2.4 6.0 3.0 T493C156(1)016(2)(3)(4)(5) 2.4 6.0 1.8 T493B226(1)016(2)(3)(4)(5) 3.5 6.0 2.2 T493C226(1)016(2)(3)(4)(5) 3.6 6.0 1.6 T493D226(1)016(2)(3)(4)(5) 3.6 6.0 0.8 Low ESR Ohms @+25°C 100 kHz Max Ultra-Low ESR, Ohms @+25°C 100 kHz Max 0.6 0.3 2.0 0.25 0.22 0.65 0.2 0.2 8.0 0.3 0.15 0.3 0.15 0.3 0.1 0.15 0.15 0.1 6.0 6.0 6.0 4.0 3.5 3.0 1.5 3.0 1.2 1.8 0.8 0.6 4.0 0.7 0.5 0.7 0.4 2.0 0.3 0.3 0.3 0.2 0.3 0.2 0.15 0.3 0.1 0.1 0.2 0.2 0.1 0.1 N/A N/A N/A 0.25 N/A N/A N/A 0.18 0.70 0.15 N/A 0.20 N/A 0.23 0.10 0.07 0.10 0.07 N/A N/A N/A N/A N/A N/A 1.3 N/A 0.90 N/A 0.75 N/A 3.2 N/A 0.48 N/A 0.29 N/A N/A N/A N/A 0.08 0.23 0.09 0.15 N/A 0.08 0.08 0.09 0.08 0.05 0.05 8.0 6.0 6.0 4.0 3.5 2.0 3.0 1.5 3.0 1.2 0.8 0.8 0.6 0.8 0.4 0.8 0.4 0.3 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 0.75 N/A N/A 0.80 N/A N/A N/A N/A (1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5% tolerance,contact KEMET sales representative. (2) To complete KEMET part number, insert A for Non-ER; B for 0.1%/1000 Hrs.; or C for 0.01%/1000 Hrs. Reliability Level. (3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 μ inch minimum Termination Finish or T for 100% Tin. (4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10 cycles, -55°C & +85°C. (5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option. * Extended Values #Maximum Capacitance Change @ 125°C = +15% ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 SOLID TANTALUM CHIP CAPACITORS Solid Tantalum Surface Mount T493 SERIES—Military COTS T493 RATINGS AND PART NUMBER REFERENCE Capacitance µF Case Size 33.0 33.0 #47.0 47.0 68.0 #100.0 100.0 #150.0 C D C D D D X X 0.47 0.68 1.0 1.5 1.5 2.2 2.2 #3.3 3.3 #4.7 4.7 4.7 #6.8 6.8 #10.0 10.0 15.0 15.0 #22.0 22.0 33.0 47.0 47.0 #68.0 68.0 A A A A B A B A B A B C B C B C C D C D D D X D X 0.33 0.47 0.68 0.68 1.0 1.0 1.5 1.5 2.2 2.2 3.3 3.3 #4.7 4.7 6.8 6.8 10.0 10.0 #15.0 15.0 15.0 22.0 22.0 33.0 33.0 †47.0 †47.0 A A A B A B A B B C B C B C C D C D C D X D X D X D X KEMET Part Number DCL µA @ 25ºC Max DF % @ +25ºC 120 Hz Max Std. ESR Ohms @+25°C 100 kHz Max 16 Volt Rating at +85ºC (10 Volt Rating at +125ºC) cont. T493C336(1)016(2)(3)(4)(5) 5.3 6.0 1.2 T493D336(1)016(2)(3)(4)(5) 5.3 6.0 0.8 T493C476(1)016(2)(3)(4)(5) 7.5 6.0 1.2 T493D476(1)016(2)(3)(4)(5) 7.5 6.0 0.8 T493D686(1)016(2)(3)(4)(5) 10.9 6.0 0.7 T493D107(1)016(2)(3)(4)(5) 16.0 8.0 0.7 T493X107(1)016(2)(3)(4)(5) 16.0 8.0 0.7 T493X157(1)016(2)(3)(4)(5) 24.0 8.0 0.5 20 Volt Rating at +85ºC (13 Volt Rating at +125ºC) T493A474(1)020(2)(3)(4)(5) 0.5 4.0 14.0 T493A684(1)020(2)(3)(4)(5) 0.5 4.0 12.0 T493A105(1)020(2)(3)(4)(5) 0.5 4.0 10.0 T493A155(1)020(2)(3)(4)(5) 0.5 6.0 8.0 T493B155(1)020(2)(3)(4)(5) 0.5 6.0 6.0 T493A225(1)020(2)(3)(4)(5) 0.5 6.0 7.0 T493B225(1)020(2)(3)(4)(5) 0.5 6.0 3.5 T493A335(1)020(2)(3)(4)(5) 0.7 6.0 7.0 T493B335(1)020(2)(3)(4)(5) 0.7 6.0 3.5 T493A475(1)020(2)(3)(4)(5) 1.0 8.0 6.0 T493B475(1)020(2)(3)(4)(5) 1.0 6.0 3.5 T493C475(1)020(2)(3)(4)(5) 1.0 6.0 2.4 T493B685(1)020(2)(3)(4)(5) 1.4 6.0 3.5 T493C685(1)020(2)(3)(4)(5) 1.4 6.0 1.9 T493B106(1)020(2)(3)(4)(5) 2.0 6.0 3.0 T493C106(1)020(2)(3)(4)(5) 2.0 6.0 1.8 T493C156(1)020(2)(3)(4)(5) 3.0 6.0 1.7 T493D156(1)020(2)(3)(4)(5) 3.0 6.0 1.0 T493C226(1)020(2)(3)(4)(5) 4.4 6.0 1.2 T493D226(1)020(2)(3)(4)(5) 4.4 6.0 0.8 T493D336(1)020(2)(3)(4)(5) 6.6 6.0 0.8 T493D476(1)020(2)(3)(4)(5) 9.4 6.0 0.7 T493X476(1)020(2)(3)(4)(5) 7.5 4.0 0.7 T493D686(1)020(2)(3)(4)(5) 13.6 8.0 0.7 T493X686(1)020(2)(3)(4)(5) 13.6 6.0 0.7 25 Volt Rating at +85ºC (17 Volt Rating at +125ºC) T493A334(1)025(2)(3)(4)(5) 0.5 4.0 15.0 T493A474(1)025(2)(3)(4)(5) 0.5 4.0 14.0 T493A684(1)025(2)(3)(4)(5) 0.5 4.0 10.0 T493B684(1)025(2)(3)(4)(5) 0.5 4.0 7.5 T493A105(1)025(2)(3)(4)(5) 0.5 4.0 8.0 T493B105(1)025(2)(3)(4)(5) 0.5 4.0 5.0 T493A155(1)025(2)(3)(4)(5) 0.5 6.0 10.0 T493B155(1)025(2)(3)(4)(5) 0.5 6.0 5.0 T493B225(1)025(2)(3)(4)(5) 0.6 6.0 4.5 T493C225(1)025(2)(3)(4)(5) 0.6 6.0 3.5 T493B335(1)025(2)(3)(4)(5) 0.9 6.0 3.5 T493C335(1)025(2)(3)(4)(5) 0.9 6.0 2.5 T493B475(1)025(2)(3)(4)(5) 1.2 6.0 1.5 T493C475(1)025(2)(3)(4)(5) 1.2 6.0 2.4 T493C685(1)025(2)(3)(4)(5) 1.7 6.0 1.9 T493D685(1)025(2)(3)(4)(5) 1.7 6.0 1.4 T493C106(1)025(2)(3)(4)(5) 2.5 6.0 1.5 T493D106(1)025(2)(3)(4)(5) 2.5 6.0 1.0 T493C156(1)025(2)(3)(4)(5) 3.8 6.0 1.5 T493D156(1)025(2)(3)(4)(5) 3.8 6.0 1.0 T493X156(1)025(2)(3)(4)(5) 3.0 6.0 0.7 T493D226(1)025(2)(3)(4)(5) 5.5 6.0 0.8 T493X226(1)025(2)(3)(4)(5) 4.4 4.0 0.7 T493D336(1)025(2)(3)(4)(5) 8.3 6.0 0.7 T493X336(1)025(2)(3)(4)(5) 8.3 6.0 0.7 T493D476(1)025(2)(3)(4)(5) 11.8 10.0 0.7 T493X476(1)025(2)(3)(4)(5) 11.8 6.0 0.7 Low ESR Ohms @+25°C 100 kHz Max 0.3 0.25 0.5 0.2 0.2 0.125 0.1 0.2 Ultra-Low ESR, Ohms @+25°C 100 kHz Max 0.23 0.15 0.35 0.10 0.15 0.10 0.08 0.10 9.0 8.0 5.5 4.5 4.0 4.0 1.5 4.0 1.3 1.8 1.0 0.6 1.0 0.6 1.0 0.5 0.4 0.35 0.4 0.3 0.2 0.2 0.15 0.2 0.15 N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A N/A 1.0 0.48 0.38 0.28 N/A 0.18 0.15 0.10 0.10 0.15 0.12 10.0 9.0 6.0 5.5 4.0 2.0 3.0 1.5 1.2 2.2 2.0 1.2 1.0 0.6 0.6 1.0 0.5 0.4 0.9 0.35 0.2 0.2 0.23 0.4 0.3 0.2 0.3 N/A N/A N/A N/A N/A N/A N/A N/A N/A 1.30 N/A 0.75 N/A 0.58 0.49 N/A 0.45 N/A N/A 0.28 0.20 0.20 0.23 0.09 0.18 0.12 0.15 (1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5% tolerance,contact KEMET sales representative. (2) To complete KEMET part number, insert A for Non-ER; B for 0.1%/1000 Hrs.; or C for 0.01%/1000 Hrs. Reliability Level. (3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 μ inch minimum Termination Finish or T for 100% Tin. (4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10 cycles, -55°C & +85°C. (5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option. * Extended Values #Maximum Capacitance Change @ 125°C = +15% † Maximum Capacitance Change @ 125°C = +20% ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 25 SOLID TANTALUM CHIP CAPACITORS T493 SERIES—Military COTS T493 RATINGS AND PART NUMBER REFERENCE Capacitance µF Case Size 0.10 0.15 0.22 0.33 0.47 0.47 0.68 0.68 1.0 1.0 1.5 1.5 2.2 2.2 #3.3 3.3 4.7 4.7 6.8 6.8 #10.0 10.0 10.0 15.0 15.0 #22.0 22.0 #33.0 #47.0 A A A A A B A B A B B C B C B C C D C D C D X D X D X X E 0.10 0.15 0.15 0.22 0.33 0.47 0.47 0.68 1.0 1.5 1.5 2.2 2.2 3.3 4.7 4.7 6.8 A A B B B B C C C C D C D D D X X KEMET Part Number DCL µA @ 25ºC Max DF % @ +25ºC 120 Hz Max Std. ESR Ohms @+25°C 100 kHz Max 35 Volt Rating at +85ºC (23 Volt Rating at +125ºC) T493A104(1)035(2)(3)(4)(5) 0.5 4.0 20.0 T493A154(1)035(2)(3)(4)(5) 0.5 4.0 19.0 T493A224(1)035(2)(3)(4)(5) 0.5 4.0 18.0 T493A334(1)035(2)(3)(4)(5) 0.5 4.0 15.0 T493A474(1)035(2)(3)(4)(5) 0.5 4.0 14.0 T493B474(1)035(2)(3)(4)(5) 0.5 4.0 8.0 T493A684(1)035(2)(3)(4)(5) 0.5 4.0 10.0 T493B684(1)035(2)(3)(4)(5) 0.5 4.0 6.5 T493A105(1)035(2)(3)(4)(5) 0.5 4.0 10.0 T493B105(1)035(2)(3)(4)(5) 0.5 4.0 5.0 T493B155(1)035(2)(3)(4)(5) 0.5 6.0 5.0 T493C155(1)035(2)(3)(4)(5) 0.5 6.0 4.5 T493B225(1)035(2)(3)(4)(5) 0.8 6.0 4.0 T493C225(1)035(2)(3)(4)(5) 0.8 6.0 3.5 T493B335(1)035(2)(3)(4)(5) 1.2 6.0 3.5 T493C335(1)035(2)(3)(4)(5) 1.2 6.0 2.5 T493C475(1)035(2)(3)(4)(5) 1.7 6.0 2.5 T493D475(1)035(2)(3)(4)(5) 1.7 6.0 1.5 T493C685(1)035(2)(3)(4)(5) 2.4 6.0 2.0 T493D685(1)035(2)(3)(4)(5) 2.4 6.0 1.3 T493C106(1)035(2)(3)(4)(5) 3.5 6.0 2.0 T493D106(1)035(2)(3)(4)(5) 3.5 6.0 1.0 T493X106(1)035(2)(3)(4)(5) 2.8 4.0 0.9 T493D156(1)035(2)(3)(4)(5) 5.3 6.0 0.8 T493X156(1)035(2)(3)(4)(5) 5.3 6.0 0.9 T493D226(1)035(2)(3)(4)(5) 7.7 6.0 0.7 T493X226(1)035(2)(3)(4)(5) 7.7 6.0 0.7 T493X336(1)035(2)(3)(4)(5) 11.6 6.0 0.6 T493E476(1)035(2)(3)(4)(5) 16.5 10.0 0.5 50 Volt Rating at +85ºC (33 Volt Rating at +125ºC) T493A104(1)050(2)(3)(4)(5) 0.5 4.0 20.0 T493A154(1)050(2)(3)(4)(5) 0.5 4.0 19.0 T493B154(1)050(2)(3)(4)(5) 0.5 4.0 16.0 T493B224(1)050(2)(3)(4)(5) 0.5 4.0 14.0 T493B334(1)050(2)(3)(4)(5) 0.5 4.0 10.0 T493B474(1)050(2)(3)(4)(5) 0.5 4.0 9.0 T493C474(1)050(2)(3)(4)(5) 0.5 4.0 8.0 T493C684(1)050(2)(3)(4)(5) 0.5 4.0 7.0 T493C105(1)050(2)(3)(4)(5) 0.5 4.0 5.5 T493C155(1)050(2)(3)(4)(5) 0.8 6.0 4.5 T493D155(1)050(2)(3)(4)(5) 0.8 6.0 3.5 T493C225(1)050(2)(3)(4)(5) 1.1 6.0 3.5 T493D225(1)050(2)(3)(4)(5) 1.1 6.0 2.5 T493D335(1)050(2)(3)(4)(5) 1.7 6.0 2.0 T493D475(1)050(2)(3)(4)(5) 2.4 6.0 1.5 T493X475(1)050(2)(3)(4)(5) 1.9 4.0 0.9 T493X685(1)050(2)(3)(4)(5) 3.5 6.0 1.0 Low ESR Ohms @+25°C 100 kHz Max Ultra-Low ESR, Ohms @+25°C 100 kHz Max 10.0 6.0 6.0 6.0 4.0 2.5 6.0 2.5 6.0 2.0 3.0 2.5 2.5 1.5 1.3 0.8 0.6 0.7 0.9 0.5 1.2 0.3 0.25 0.3 0.3 0.4 0.3 0.3 0.3 N/A N/A N/A N/A N/A 1.5 N/A N/A N/A 1.5 N/A N/A 1.5 0.75 N/A 0.60 0.45 N/A N/A 0.40 N/A 0.25 0.18 0.23 0.20 0.20 0.20 0.18 N/A 10.0 10.0 10.0 10.0 2.5 2.0 1.8 1.6 1.6 1.5 1.0 1.5 0.8 0.8 0.6 0.3 0.5 N/A N/A N/A N/A N/A N/A N/A N/A 1.3 N/A N/A N/A 0.60 0.70 0.28 0.30 N/A (1) To complete KEMET part number, insert M for ±20% or K for ±10% capacitance tolerance. To request ±5% tolerance,contact KEMET sales representative. (2) To complete KEMET part number, insert A for Non-ER; B for 0.1%/1000 Hrs.; or C for 0.01%/1000 Hrs. Reliability Level. (3) To complete KEMET part number, insert B for Gold Plated (50 µ inch minimum); C for Hot Solder Dipped (60 µ inch minimum); H for Solder Plated (100 µ inch minimum); K for Solder Fused (60 μ inch minimum Termination Finish or T for 100% Tin. (4) To complete KEMET part number for Surge Current testing, insert 61 for none; 62 for 10 cycles +25°C; or 64 for 10 cycles, -55°C & +85°C. (5) To complete KEMET part number, insert 10 for Standard ESR; 20 for Low ESR or 30 for Ultra-low ESR Option. * Extended Values 26 #Maximum Capacitance Change @ 125°C = +15% ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 TANTALUM AND ALUMINUM CHIP CAPACITORS Packaging Information Tape & Reel Packaging KEMET’s Molded Tantalum and Aluminum Chip Capacitor families are packaged in 8 mm and 12 mm plastic tape on 7" and 13" reels, in accordance with EIA Standard 481-1: Taping of Surface Mount Components for Automatic Handling. This packaging system is compatible with all tape fed automatic pick and place systems. Right Hand Orientation Only (+) Embossed Carrier (–) Embossment 8mm ±.30 8mm (0.315") (.315or±.012") or 12mm (0.472") 12mm ±.30 (.472 ±.012") Top Tape Thickness .10mm (.004") Max Thickness 178mm (7.00") 180mm (7.0") oror 330mm (13.00") 330mm (13.0") Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556. Case Code KEMET EIA R 2012-12 S 3216-12 T 3528-12 U 6032-15 W 7343-15 V 7343-20 A 3216-18 B 3528-21 C 6032-28 D 7343-31 Y 7343-40 X 7343-43 E 7260-38 Tape Width-mm 8 8 8 12 12 12 8 8 12 12 12 12 12 7" Reel* 2,500 2,500 2,500 1,000 1,000 1,000 2,000 2,000 500 500 500 500 500 13" Reel* 10,000 10,000 10,000 5,000 3,000 3,000 9,000 8,000 3,000 2,500 2,000 2,000 2,000 * No c-spec required for 7" reel packaging. C-7280 required for 13" reel packaging. * Standard reel packaging is not mandatory. * Bulk packaging also available using C-7610. 92 ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 Packaging QUANTITIES PACKAGED PER REEL TANTALUM, CERAMIC AND ALUMINUM CHIP CAPACITORS Packaging Information Performance Notes 1. Cover Tape Break Force: 1.0 Kg Minimum. 2. Cover Tape Peel Strength: The total peel strength of the cover tape from the carrier tape shall be: Tape Width Peel Strength 8 mm 0.1 Newton to 1.0 Newton (10g to 100g) 12 mm 0.1 Newton to 1.3 Newton (10g to 130g) The direction of the pull shall be opposite the direction of the carrier tape travel. The pull angle of the carrier tape shall be 165 to 180 from the plane of the carrier tape. During peeling, the carrier and/or cover tape shall be pulled at a velocity of 300 ±10 mm/minute. 3. Reel Sizes: Molded tantalum capacitors are available on either 180 mm (7") reels (standard) or 330 mm (13") reels (with C-7280). Note that 13” reels are preferred. 4. Labeling: Bar code labeling (standard or custom) shall be on the side of the reel opposite the sprocket holes. Refer to EIA-556. Embossed Carrier Tape Configuration: Figure 1 Table 1 — EMBOSSED TAPE DIMENSIONS (Metric will govern) Constant Dimensions — Millimeters (Inches) Tape Size 8 mm and 12 mm D0 E 1.5 1.75 ±0.10 +0.10 -0.0 (0.059 (0.069 ±0.004) +0.004, -0.0) P0 P2 T Max T1 Max 4.0 ±0.10 2.0 ±0.05 0.600 0.100 (0.157 ±0.004) (0.079 ±0.002) (0.024) (0.004) Variable Dimensions — Millimeters (Inches) Tape Size Pitch B1 Max. Note 1 D1 Min. Note 2 F P1 R Min. Note 3 T2 Max W 8 mm Single (4 mm) 4.4 1.0 3.5 ±0.05 4.0 ±0.10 25.0 2.5 8.0 ±0.30 (.315 ±0.012) 12 mm Double (8 mm) (0.173) (0.039) (0.138 ±0.002) (0.157 ±0.004) (0.984) (0.098) 8.2 (0.323) 1.5 5.5 ±0.05 (0.059) (0.217 ±0.002) 8.0 ±0.10 30.0 (0.315 ±0.004) (1.181) 4.6 12.0 ±0.30 (0.181) (0.472 ±0.012) A0B0K0 Note 4 NOTES 1. B1 dimension is a reference dimension for tape feeder clearance only. 2. The embossment hole location shall be measured from the sprocket hole controlling the location of the embossment. Dimensions of embossment location and hole location shall be applied independent of each other. 3. Tape with components shall pass around radius “R” without damage (see sketch A). The minimum trailer length (Fig. 2) may require additional length to provide R min. for 12 mm embossed tape for reels with hub diameters approaching N min. (Table 2) 4. The cavity defined by A0, B0, and K0 shall be configured to surround the part with sufficient clearance such that the chip does not protrude beyond the sealing plane of the cover tape, the chip can be removed from the cavity in a vertical direction without mechanical restriction, rotation of the chip is limited to 20 degrees maximum in all 3 planes, and lateral movement of the chip is restricted to 0.5 mm maximum in the pocket (not applicable to vertical clearance.) 94 ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 TANTALUM, CERAMIC AND ALUMINUM CHIP CAPACITORS Packaging Information Embossed Carrier Tape Configuration (cont.) 20° Sketch D: Tape Camber (Top View) 1mm (0.039) Max. 1mm (0.039) Max. 250mm (9.843) Allowable camber to be 1 mm/250 mm. 400mm (15.75) Min. Figure 2: Tape Leader & Trailer Dimensions (Metric Dimensions Will Govern) Packaging Figure 3: Reel Dimensions (Metric Dimensions will govern) Table 2 – REEL DIMENSIONS (Metric will govern) Tape Size 8 mm A Max 330.0 (12.992) B* Min 1.5 (0.059) C 13.0 ± 0.20 (0.512 ± 0.008) D* Min 20.2 (0.795) 12 mm 330.0 (12.992) 1.5 (0.059) 13.0 ± 0.20 (0.512 ± 0.008) 20.2 (0.795) N Min 50.0 (1.969) See Note 3 Table 1 W1 8.4 +1.5, -0.0 (0.331 +0.059, -0.0) 12.4 +2.0, -0.0 (0.488 +0.078, -0.0) W2 Max 14.4 (0.567) 18.4 (0.724) ©KEMET Electronics Corporation, P.O. Box 5928, Greenville, S.C. 29606, (864) 963-6300 W3 7.9 Min (0.311) 10.9 Max (0.429) 11.9 Min (0.469) 15.4 Max (0.606) 95