Surface Mount Quad Photodiode OPR5911 Features: Surface mountable Closely matched responsivity High temperature operation Common cathode connections Description: Each OPR5911 device is a four-element photodiode that is enclosed in a compact polyimide chip carrier and designed for a variety of encoder and control applications. The single chip construction ensures excellent matching and very tight dimensional tolerances between active areas. The custom opaque package shields the photodiodes from stray light and can withstand multiple exposures to the most demanding soldering conditions, while the wraparound gold-plated solder pads offer exceptions storage and wetting characteristics. All cathodes in the OPR5911 are bonded together, which enables the elements to act in unison with limited external circuitry. See Application Bulletin 237 for handling considerations. Applications: Encoder applications Control applications Ordering Information Part Receiver Type Number OPR5911 Photodiode Array Warning: Front Window is pressure sensitive. Do not apply pressure or high vacuum to window. # of Elements 4 Responsivity Reverse Voltage Active Area (mA/mW) Min. Min. (mm2) 0.45 14 1.61 (each) Packaging Chip Tray OPR5911 UNLESS OTHERWISE SPECIFIED, ALL TOLERANCES ARE ±.005” General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc Pin # Function Pin # Function 1 2 3 4 5 6 Anode 1 Common Cathode N. C. / N.C. N. C. / N.C. Common Cathode Anode 2 7 8 9 10 11 12 Anode 3 Common Cathode N. C. / N.C. N. C. / N.C. Common Cathode Anode 4 TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | [email protected] Issue D 7/2017 Page 1 Surface Mount Quad Photodiode Electrical Specifications Absolute Maximum Ratings (TA = 25° C unless otherwise noted) Storage and Operating Temperature -55° C to +125° C Reverse Breakdown Voltage 14 V / minute Solder reflow time within 5°C of peak temperature is 20 to 40 seconds (1) 250° C Electrical Characteristics (TA = 25° C unless otherwise noted) SYMBOL MIN TYP MAX UNITS 0.45 — — A/W Reverse Breakdown Voltage 14 — — V IR = 100 µA ID Reverse Dark Current — — 30 nA VR = 10 V CT Capacitance — 10 — pF R VBR LXW PARAMETER Responsivity Active Area (per diode) — 1.61 — mm TEST CONDITIONS Ee = 10 µW, = 850 nm, VR = 0 VR = 10 V 2 (1.27 mm x 1.27 mm) Notes: 1. Solder time less than 5 seconds at temperature extreme. Spectral Responsivity Relative Response (%) 100 80 60 40 20 0 .4 .5 .6 .7 .8 .9 1.0 1.1 Wavelength (µm) General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | [email protected] Issue D 7/2017 Page 2 Surface Mount Quad Photodiode Packaging Orientation General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | [email protected] Issue D 7/2017 Page 3 Surface Mount Quad Photodiode Issue Change Description Approval Date Initial Release A 08/1996 Put in new format 08/14/2006 A.1 Add Application Bulletin 237 note. Add pressure sensitivity warning. Add packaging to Ordering Information chart. Harry Whitford 4/17/2009 A.2 Separate OPR5911 and OPR5925. Add new photo Harry Whitford 4/28/2009 B Change E to Ee; R to R and V(BR)R to VBR in the Electrical Characteristics table. Change 1 to 1.27 for the L X W, TYP on the Electrical Characteristics table. Change 1 to 1.61 under Active Area on the Ordering Information table. Harry Whitford 3/20/2012 C Update to TTE format. Correct die array pitch from .075 to .060. Correct L X W from 1.00 mm x 1.00 mm (1.27 mm2) to 1.27 mm x 1.27 mm (1.61 mm2). Harry Whitford 6/10/2012 General Note TT Electronics reserves the right to make changes in product specification without notice or liability. All information is subject to TT Electronics’ own data and is considered accurate at time of going to print. © TT Electronics plc TT Electronics | Optek Technology, Inc. 1645 Wallace Drive, Ste. 130, Carrollton, TX USA 75006 |Ph: +1 972 323 2200 www.ttelectronics.com | [email protected] Issue D 7/2017 Page 4