MB05F THRU MB10F Green Products Technical Data Data Sheet N1456, Rev. A MB05F THRU MB10F SINGLE PHASE 0.8AMP SURFACE MOUNT GLASS PASSIVATED BRIDGE RECTIFIER Features: • • • • • • Glass passivated die construction Low forward voltage drop High current capability High surge current capability Designed for surface mount application Plastic material-UL flammability 94V-0 Mechanical Data: • • • • • • Case: MB-F, Molded plastic Terminals: Plated leads solderable per MIL-STD-202, Method 208 Polarity: as marked on case Mounting Position: Any Ordering Information: 5000pcs/reel Lead Free: For RoHS / Lead Free Version Mechanical Dimensions: In Inches/ mm MBF • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • MB05F THRU MB10F Green Products Technical Data Data Sheet N1456, Rev. A Marking Diagram: Where XXXXX is YYWWL MB05F YY WW L = Part Name = Year = Week = Lot Number Cautions：Molding resin Epoxy resin UL:94V-0 Maximum Ratings and Electrical Characteristics @TA=25°C unless otherwise specified Characteristic Device Marking Symbol MB05F MB1F MB2F MB4F MB6F MB8F MB10F Unit Marking MB05F MB1F MB2F MB4F MB6F MB8F MB10F - Peak Repetitive Reverse Voltage Working Peak Reverse Voltage DC Blocking Voltage VRRM VRWM VR 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 480 700 V Average Rectified Output Current (Note1)@TA=40℃ (Note 2)@TA=40℃ Non-Repetitive Peak Forward Surge Current 8.3ms Single half sine-wave superimposed on rated load (JEDEC Method) IO 0.5 0.8 A IFSM 30 A VFM 1.1 V Peak Reverse Current @TA = 25°C At Rated DC Blocking Voltage @TA = 125°C IR 5 500 μA Typical Junction Capacitance (Note 3) Cj 13 pF RθJA 60 RθJL 16 TJ ,TSTG -55+150 Forward Voltage per element @IF =0.8A Typical Thermal Resistance per leg Operating Junction and Storage Temperature Range 2 Note: 1. Mounted on glass epoxy PC board with 1.3mm solder pad. 2 2. Mounted on aluminum substrate PC board with 1.3mm solder pad. 3. Measured at 1.0 MHz and applied reverse voltage of 4.0V D.C. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • °C/W °C MB05F THRU MB10F Technical Data Data Sheet N1456, Rev. A Green Products • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com • MB05F THRU MB10F Technical Data Data Sheet N1456, Rev. A Green Products DISCLAIMER: 1- The information given herein, including the specifications and dimensions, is subject to change without prior notice to improve product characteristics. Before ordering, purchasers are advised to contact the SMC - Sangdest Microelectronics (Nanjing) Co., Ltd sales department for the latest version of the datasheet(s). 2- In cases where extremely high reliability is required (such as use in nuclear power control, aerospace and aviation, traffic equipment, medical equipment , and safety equipment) , safety should be ensured by using semiconductor devices that feature assured safety or by means of users’ fail-safe precautions or other arrangement . 3- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any damages that may result from an accident or any other cause during operation of the user’s units according to the datasheet(s). SMC - Sangdest Microelectronics (Nanjing) Co., Ltd assumes no responsibility for any intellectual property claims or any other problems that may result from applications of information, products or circuits described in the datasheets. 4- In no event shall SMC - Sangdest Microelectronics (Nanjing) Co., Ltd be liable for any failure in a semiconductor device or any secondary damage resulting from use at a value exceeding the absolute maximum rating. 5- No license is granted by the datasheet(s) under any patents or other rights of any third party or SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 6- The datasheet(s) may not be reproduced or duplicated, in any form, in whole or part, without the expressed written permission of SMC - Sangdest Microelectronics (Nanjing) Co., Ltd. 7- The products (technologies) described in the datasheet(s) are not to be provided to any party whose purpose in their application will hinder maintenance of international peace and safety nor are they to be applied to that purpose by their direct purchasers or any third party. When exporting these products (technologies), the necessary procedures are to be taken in accordance with related laws and regulations.. • China - Germany - Korea - Singapore - United States • • http://www.smc-diodes.com - sales@ smc-diodes.com •