Aries 20-002.5-101TL Dip jumper Datasheet

Series 100 thru 111 DIP Jumpers
FEATURES:
• Aries offers a wide array of DIP jumper configurations and wiring possibilities for all
your programming needs.
• Reliable, electronically tested solder connections.
• Protective covers are ultrasonically welded on and
provide strain relief for cables.
• 10-color cable allows for easy identification and tracing.
• Consult factory for jumper lengths under 2.000 [50.80].
SPECIFICATIONS:
• Header body and cover is black UL 94V-0 4/6 Nylon.
• Header pins are Brass, 1/2 hard.
• Standard Pin plating is 10 μ [.25μm] min. Gold per MIL-G-45204 over 50 μ [1.27μm]
min. Nickel per QQ-N-290.
• Optional Plating:
“T” = 200μ” [5.08μm] min. Matte Tin per ASTM B545-97 over 50μ” [1.27μm] min.
Nickel per QQ-N-290.
Note: Aries specializes in custom design and production. In addition to the
“TL” = 200μ” [5.08μm] 90/10 Tin/Lead per MIL-T-10727 Type I over 50μ” [1.27μm]
standard products shown on this page, special materials, platings, sizes,
min. Nickel per QQ-N-290.
and configurations can be furnished, depending on quantities. Aries
• Cable insulation is UL Style 2697 Polyvinyl Chloride (PVC).
reserves the right to change product specifications without notice.
**
• Laminate is clear PVC, self-extinguishing.
• .050 [1.27] pitch conductors are 28 AWG, 7/36 strand, Tinned Copper per ASTM B 33
XX-XXXX-XXXXXX
(.039 [.99] pitch conductors are 26 AWG, 7/34 strand).
• Cable current rating=1 Amp @ 10°C [50°F] above
No. of conductors
Optional suffix:
ambient.
(see table)
T=Tin plated header pins
• Cable voltage rating=300 Volts.
TL= Tin/Lead plated
Cable length in inches:
• Cable temperature rating=176°F [80°C].
Jumper
header pins
Ex: 2” = -002• Cable capacitance=13.0 pf/ft. [42.7pf/meter] nominal
series
TW=twisted pair cable
2.5” = -002.5@1 MHz.**
ST=stripped and Tin
(min. length=2.”[50.80mm])
• Crosstalk: 10’ sample, 5 ns rise time with 2 lines driven. Near end=4.7%;
Dipped ends
Far end=4.3% nominal.**
(Series 106-111)
• Propagation delay=1.5 ns/ft. [4.9 ns/meter] nominal.**
STL= stripped and
Centers
“C”
Dim.
“D”
Available
Sizes
10
• Insulation resistance=10 Ohms (10 ft. [3 meters] min.).
Tin/Lead Dipped Ends
.300 [7.62]
.395 [10.03]
4 thru 20
**Note: Applies to .050 [1.27] pitch cable only.
(Series 106-111)
MOUNTING CONSIDERATIONS:
.400 [10.16]
.495 [12.57]
22
•Suggested PCB hole size=.033 ± .002 [.86 ±.05].
ORDERING INFORMATION
“L” ± .125
SERIES
100
.600 [15.24]
.695 [17.65]
24, 28, 40
All tolerances ± .005[.13]
All Dimensions: Inches [Millimeters]
unless otherwise specified
“A”=(NO. OF CONDUCTORS X .050 [1.27) + .095 [2.41]
“B”=(NO. OF CONDUCTORS - 1) X .050 [1.27]
HEADER DETAIL
Numbers
shown pin
side for
reference
only.
Note: 10, 12, 18, 20, & 28
conductor jumpers do not
have numbers on covers.
“L” ± .125
See Data Sheet No.
11007 for other
configurations and
additional information.
SERIES
101
Bristol, PA USA
TEL: (215) 781-9956
FAX: (215) 781-9845
abc
11006
http://www.arieselec.com • [email protected]
REV. H
PRINTOUTS OF THIS DOCUMENT MAY BE OUT OF DATE AND SHOULD BE CONSIDERED UNCONTROLLED
Similar pages