Ordering number:EN3405 DBC10 Silicon Diffused Junction Type 1A Single-Phase Bridge Rectifier Features Package Dimensions · Plastic molded structure. · Peak reverse voltage:VRM=200 to 600V. · Average rectified current:IO=1.0A. unit:mm 1241 [DBC10] Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Peak Reverse Voltage Symbol Average Recitified Current VRM IO Surge Forward Current IFSM Conditions DBC10C DBC10E DBC10G Unit 200 400 600 V 50Hz sine wave, load resistor → → 1.0 A 50Hz sine wave, non-repetitive, 1cycle peak value → → 30 A Junction Temperature Tj → → 150 ˚C Storage Temperature Tstg → → –40 to +150 ˚C Electrical Characteristics at Ta = 25˚C, per constituent element of bridge Parameter Forward Voltage Reverse Current Thermal Resistance Symbol Conditions Ratings min typ max Unit VF IR IF=0.5A 1.0 V VR:VRM 10 µA θj1 Junction-lead 10 ˚C/W SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE, Tokyo Bldg., 1-10 , Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 52098HA (KT)/42294YH (KOTO) 8-6498 No.3405-1/2 DBC10 No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of May, 1998. Specifications and information herein are subject to change without notice. PS No.3405-2/2