Ordering number :EN653F DZB6.2 to DZB30 Sillicon Diffused Junction Type 1.0W Zener Diodes Features Package Dimensions · Plastic molded structure. · Voltage regulator use. · Power dissipation:P=1.0W. · Zener voltage:VZ=6.2 to 30V unit:mm 1083 [DZB6.2 to DZB30] C:Cathode A:Anode Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Conditions Ratings Unit Power Dissipation P 1.0 W Junction Temperature Tj 150 ˚C Storage Temperature Tstg –40 to +150 ˚C Electrical Characteristics at Ta = 25˚C Type No. Zener Characteristics Forward Voltage Drop Zener Voltage VZ Dynamic Resistance [V] [Ω] Measured Reverse Current Measured Measured Current VF Current IR Voltage IZ [V] [A] [µA] [V] [mA] max max typ min max max DZB6.2U 6.2 5.60 6.80 60 –10 2 0.2 –10 –2.0 6.8C 6.8 6.45 7.14 60 –10 2 0.2 –10 –3.0 7.5C 7.5 7.13 7.81 30 –10 2 0.2 –10 –4.5 8.2C 8.2 7.79 8.61 30 –10 2 0.2 –10 –4.9 9.1C 9.1 8.65 9.55 30 –10 2 0.2 –10 –5.5 10C 10 9.50 10.50 30 –10 2 0.2 –10 –6.0 11C 11 10.50 11.50 30 –10 2 0.2 –10 –7.0 12C 12 11.40 12.60 30 –10 2 0.2 –10 –8.0 13C 13 12.40 13.60 30 –10 2 0.2 –10 –9.0 15C 15 14.30 15.80 30 –10 2 0.2 –10 –10.0 16C 16 15.20 16.80 30 –10 2 0.2 –10 –11.0 18C 18 17.10 18.90 30 –10 2 0.2 –10 –13.0 20C 20 19.00 21.00 30 –10 2 0.2 –10 –14.0 22C 22 20.90 23.10 30 –10 2 0.2 –10 –16.0 24C 24 22.80 25.20 30 –10 2 0.2 –10 –17.0 27C 27 25.70 28.30 30 –10 2 0.2 –10 –19.0 30C 30 28.50 31.50 30 –10 2 0.2 –10 –21.0 SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 33098HA (KT)/13196GI/2089TA/1199MO/9205KI, TS No.653-1/2 DZB6.2 to 30 No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of March, 1998. Specifications and information herein are subject to change without notice. PS No.653-2/2