Ordering number :EN3908A FC809 Silicon Barrier Diode 30V, 70mA Rectifier Applications Package Dimensions · General rectification applications. · High frequency rectification (switching regulators, converters, choppers). unit:mm 1236A [FC809] Features · Low forward voltage (VF max=0.55V) . · Fast reverse recovery time (trr max=10ns) . · Composite type with 2 diodes contained in the CP package currently in use, saving the mounting space greatly. · The FC809 is formed with two chips, each being equivalent to the SB007-03CP, placed in one package. 1:Cathode 2:Cathode 3:Anode 4:No Contact 5:Anode SANYO:CP5 Specifications Absolute Maximum Ratings at Ta = 25˚C (Value per element) Parameter Repetitive Peak Reverse Voltage Symbol Conditions Ratings Unit VRRM VRSM 30 35 V Average Output Current IO 70 mA Surge Forward Current IFSM 2 A Junction Temperature Tj –55 to +125 ˚C Storage Temperature Tstg –55 to +125 ˚C Nonrepetitive Peak Reverse Surge Voltage 50Hz sine wave, 1 cycle V Electrical Characteristics at Ta = 25˚C (Value per element) .Parameter Symbol Reverse Voltage VR Forward Voltage Reverse Current VF IR Interteminal Capacitance C VR=15V VR=10V, f=1MHz Reverse Recovery Time trr IF=IR=10mA, See specified Test Circuit Thermal Resistance Ratings Conditions min IR=20µA IF=70mA typ Unit max 30 V 0.55 V 5.0 µA 3.0 pF 10 Rth (j-a) 560 ns ˚C/W · Marking:809 trr Test Circuit Electrical Connection 1:Cathode 2:Cathode 3:Anode 4:No Contact 5:Anode (Top view) SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 22898HA (KT)/90696GI/42294YH (KOTO) 8-7187 No.3908-1/2 FC809 No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of February, 1998. Specifications and information herein are subject to change without notice. PS No.3908-2/2