SANYO SB10-09

Ordering number:EN4175A
SB10-09P
Schottky Barrier Diode
90V, 1A Rectifier
Applications
Package Dimensions
· High frequency rectification (switching regulators,
converters, choppers).
unit:mm
1244A
[SB10-09P]
Features
· Low forward voltage (VF max=0.7V).
· Fast reverse recovery time (trr max=20ns).
· Low switching noise.
· Low leakage current and high reliability due to
highly reliable planar structure.
1:Anode
2:Cathode
3:No Contact
SANYO:PCP
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Repetitive Peak Reverse Voltage
Symbol
Conditions
Ratings
Unit
VRRM
VRSM
90
V
95
V
Average Output Current
IO
1
A
Surge Forward Current
IFSM
Junction Temperature
Storage Temperature
Nonrepetitive Peak Reverse Surge Voltage
50Hz sine wave, 1 cycle
5
A
Tj
–55 to +125
˚C
Tstg
–55 to +125
˚C
Electrical Characteristics at Ta = 25˚C
Parameter
Reverse Voltage
VR
Forward Voltage
VF
IR
Reverse Current
Interterminal Capacitance
C
Reverse Recovery Time
trr
Thermal Resistance
Conditons
Symbol
IR=1mA
IF=1A
typ
max
90
VR=10V, f=1MHz
IF=IR=100mA, See specifaied Test Circuit
Mounted on 250mm2×0.8mm ceramic board
Unit
V
VR=45V
Rthj-a (1)
Rthj-a (2)
Ratings
min
0.7
V
200
µA
70
pF
20
ns
280
˚C/W
100
˚C/W
Marking:SJ
trr Test Circuit
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
43098HA (KT)/42894YH (KOTO) 8-7191 No.4175-1/2
SB10-09P
No products described or contained herein are intended for use in surgical implants, life-support systems,
aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and
the like, the failure of which may directly or indirectly cause injury, death or property loss.
Anyone purchasing any products described or contained herein for an above-mentioned use shall:
Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates,
subsidiaries and distributors and all their officers and employees, jointly and severally, against any
and all claims and litigation and all damages, cost and expenses associated with such use:
Not impose any responsibilty for any fault or negligence which may be cited in any such claim or
litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of
their officers and employees jointly or severally.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees
are made or implied regarding its use or any infringements of intellectual property rights or other rights of
third parties.
This catalog provides information as of April, 1998. Specifications and information herein are subject to
change without notice.
PS No.4175-2/2