Ordering number:EN2585B SB10-18 Schottky Barrier Diode (Twin Type · Cathode Common) 80V, 1A Rectifier Applications Package Dimensions · High frequency rectification (switching regulators, converters, choppers). unit:mm 1159B [SB10-18] Features · Low forward voltage (VF max=0.85V). · Fast reverse recovery time (trr max=35ns). · Low switching noise. · Low leakage current and highly reliability due to highly reliable planar structure. 1:Anode 2:Cathode 3:Anode JEDEC:TO-220AB EIAJ:SC-46 Specifications Absolute Maximum Ratings at Ta = 25˚C Parameter Symbol Repetitive Peak Reverse Voltage Nonrepetitive Peak Reverse Surge Voltage Conditions Ratings Unit VRRM VRSM Average Output Current IO Surge Forward Current IFSM Junction Temperature Storage Temperature 180 V 190 V 1 A 50Hz, resistive load, Tc=114˚C 50Hz sine wave, 1 cycle 30 A Tj –55 to +125 ˚C Tstg –55 to +125 ˚C Electrical Characteristics Parameter Symbol Conditons Ratings min typ max Reverse Voltage VR IR=0.5mA, Tj=25˚C, * Forward Voltage VF IR IF=0.4A, Tj=25˚C, * 0.85 V VR=90V, Tj=25˚C, * 0.1 mA trr IF=2A, Tj=25˚C, *,–dIF/dt=10A/µs Junction-Case:Smoothed DC 35 ns 5.0 ˚C/W Reverse Current Reverse Recovery Time Thermal Resistance Rthj-c 180 Unit V Note*: Value per element Electrical Connection 1:Anode 2:Cathode 3:Anode SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquaters TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN 43098HA (KT)/1228AT, TS No.2585-1/3 SB10-18 No.2585-2/3 SB10-18 No products described or contained herein are intended for use in surgical implants, life-support systems, aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and the like, the failure of which may directly or indirectly cause injury, death or property loss. Anyone purchasing any products described or contained herein for an above-mentioned use shall: Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors and all their officers and employees, jointly and severally, against any and all claims and litigation and all damages, cost and expenses associated with such use: Not impose any responsibilty for any fault or negligence which may be cited in any such claim or litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of their officers and employees jointly or severally. Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees are made or implied regarding its use or any infringements of intellectual property rights or other rights of third parties. This catalog provides information as of April, 1998. Specifications and information herein are subject to change without notice. PS No.2585-3/3