SANYO SVC342

Ordering number :EN2617B
SVC342
Diffused Junction Type Sillicon Diode
Varactor Diode
for AM Receiver Electronic Tuning Use
Features
Package Dimensions
· Twin type varactor diode for low-voltage AM
electronic tuning use.
· High capacitance ratio.
· Excellent linearity of C-V characteristic.
· High Q.
unit:mm
1074B
[SVC342]
JEDEC:TO-92
EIAJ:SC-43
SANYO:NP
1,3:Anode
2:Cathode
Specifications
Absolute Maximum Ratings at Ta = 25˚C
Parameter
Symbol
Conditions
Ratings
Unit
Reverse Voltage
VR
16
V
Junction Temperature
Tj
100
˚C
Storage Temperature
Tstg
–55 to +100
˚C
Electrical Characteristics at Ta = 25˚C
Parameter
Breakdown Voltage
Reverse Current
Interterminal Capacitance*
Symbol
V(BR) R
IR
C1V
Capacitance Ratio
IR=10µA
VR=9V
VR=1V, f=1MHz
typ
max
Unit
16
V
100
nA
423.0
503.0
pF
46.0
61.0
pF
C9V
17.5
23.5
pF
Q
VR=1V, f=1MHz
200
C1V/C9V
19.5
CR
Matching Tolerance
min
VR=6V, f=1MHz
VR=9V, f=1MHz
C6V
Quality Factor
Ratings
Conditions
∆Cm
(Cmax–Cmin)/Cmin,
(Between D1 to D2) VR=1V to 9V
0.02
Note)*:The value of interterminal capacitance represent the average of measurements for tow elements.
Note)*:The SVC342 is classified by C1V as follows:
Electrical Connection
Rank
K
C1V(pF)
423.0 to 455.0
L
445.0 to 478.0
M
468.0 to 503.0
1,3:Anode
2:Cathode
SANYO Electric Co.,Ltd. Semiconductor Bussiness Headquarters
TOKYO OFFICE Tokyo Bldg., 1-10, 1 Chome, Ueno, Taito-ku, TOKYO, 110-8534 JAPAN
33098HA (KT)/71095GI (KOTO)/4059MO/7067AT, TS 8-2461 No.2617-1/3
SVC342
No.2617-2/3
SVC342
No products described or contained herein are intended for use in surgical implants, life-support systems,
aerospace equipment, nuclear power control systems, vehicles, disaster/crime-prevention equipment and
the like, the failure of which may directly or indirectly cause injury, death or property loss.
Anyone purchasing any products described or contained herein for an above-mentioned use shall:
Accept full responsibility and indemnify and defend SANYO ELECTRIC CO., LTD., its affiliates,
subsidiaries and distributors and all their officers and employees, jointly and severally, against any
and all claims and litigation and all damages, cost and expenses associated with such use:
Not impose any responsibilty for any fault or negligence which may be cited in any such claim or
litigation on SANYO ELECTRIC CO., LTD., its affiliates, subsidiaries and distributors or any of
their officers and employees jointly or severally.
Information (including circuit diagrams and circuit parameters) herein is for example only; it is not guaranteed for volume production. SANYO believes information herein is accurate and reliable, but no guarantees
are made or implied regarding its use or any infringements of intellectual property rights or other rights of
third parties.
This catalog provides information as of March, 1998. Specifications and information herein are subject to
change without notice.
PS No.2617-3/3