www.fairchildsemi.com KH200 Fast Settling, Wideband Operational Amplifier Features ■ ■ ■ ■ ■ ■ -3dB bandwidth of 95MHz 0.1% settling in 18ns 4000V/µs slew rate Low distortion, linear phase 3.6ns rise and fall times Direct replacement for CLC200 Applications ■ ■ ■ ■ ■ ■ Fast, precision A to D, D to A conversion Baseband and video communications Radar, sonar, IF processors Laser drivers, photodiode preamps High-density buffering Graphic CRT composite video drive amp General Description The KH200 operational amplifier achieves performance far superior to that of other high performance op amps. A current feedback design provides a bandwidth of DC-95MHz and an unprecedented settling time of 18nsec to 0.1%. And since thermal tail has been eliminated, the KH200 can be depended upon to settle fast and solidly maintain its level. Drive capability is also impressive at 24Vpp and 100mA. Using the KH200 is as easy as adding power supplies and a gain-setting resistor. The result is reliable, consistent performance because such characteristics as bandwidth and settling time are virtually independent of gain setting. Unlike conventional op amp designs where the optimum gain bandwidth product occurs at a high gain, minimum settling time at a gain of -1, maximum slew rate at a gain of +1, et cetera, the KH200 offers predictable response at gain settings from ±1 to ±50. This, coupled with consistent performance from unit to unit with no external compensation, makes the KH200 a real time and costsaver in design and production situations alike. Minimizing settling time was a design goal of the KH200. Settling time is one of the most demanding of all op amp requirements since it is affected by the op amp’s bandwidth, gain flatness, and harmonic distortion. The result of this effort is an amplifier fast enough for the most demanding high speed D to A converters and “flash” A to D converters. The superior slew rate and rise and fall times of the KH200 make it an ideal amplifier for a broad range of pulse, analog, and digital applications. Flat gain and phase response from DC to beyond 50MHz ensure distortion levels well below those of other op amps. A full power bandwidth of 20MHz eliminates the need for power buffers in many applications. The KH200 is constructed using thin film resistor/bipolar transistor technology, and is available in the following versions: KH200AI KH200AK -25°C to +85°C -55°C to +125°C KH200AM -55°C to +125°C KH200HXC KH200HXA -55°C to +125°C -55°C to +125°C Typical Performance 12-pin TO-8 can 12-pin TO-8 can, features burn-in and hermetic testing 12-pin TO-8 can, environmentally screened and electronically tested to MIL-STD-883 SMD#: 5962-8991001XC SMD#: 5962-8991001XA REV. 1A May 2001 DATA SHEET KH200 Electrical Characteristics KH200 (Av = +20V, VCC = ±15V, RL = 200Ω, Rf = 2000Ω; unless noted) Min/max ratings are based on product characterization and simulation. Individual parameters are tested as noted. Outgoing quality levels are determined from tested parameters. Absolute Maximum Ratings 2 REV. 1A May 2001 KH200 KH200 Performance Characteristics REV. 1A May 2001 DATA SHEET (Av = +20°C, Av = ±20, VCC = ±15V, RL = 200Ω; unless noted) 3 DATA SHEET 4 KH200 REV. 1A May 2001 DATA SHEET KH200 KH200 Package Dimensions L A e1 e2 7 φD e D1 8 9 6 10 5 11 4 12 k φb 3 2 1 α F k1 TO-8 SYMBOL INCHES MILIMETERS Minimun Maximum Minimum Maximum A 0.142 0.181 3.61 4.60 φb 0.016 0.019 0.41 0.48 φD 0.595 0.605 15.11 15.37 φD1 0.543 0.555 13.79 14.10 e 0.400 BSC 10.16 BSC e1 0.200 BSC 5.08 BSC e2 0.100 BSC 2.54 BSC F 0.016 0.030 0.41 0.76 k 0.026 0.036 0.66 0.91 k1 0.026 0.036 0.66 0.91 L 0.310 0.340 7.87 8.64 α 45° BSC NOTES: Seal: cap weld Lead finish: gold per MIL-M-38510 Package composition: Package: metal Lid: Type A per MIL-M-38510 45° BSC DISCLAIMER FAIRCHILD SEMICONDUCTOR RESERVES THE RIGHT TO MAKE CHANGES WITHOUT FURTHER NOTICES TO ANY PRODUCTS HEREIN TO IMPROVE RELIABILITY, FUNCTION OR DESIGN. FAIRCHILD DOES NOT ASSUME ANY LIABILITY ARISING OUT OF THE APPLICATION OR USE OF ANY PRODUCT OR CIRCUIT DESCRIBED HEREIN; NEITHER DOES IT CONVEY ANY LICENSE UNDER ITS PATENT RIGHTS, NOR THE RIGHTS OF OTHERS. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury of the user. www.fairchildsemi.com 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. © 2001 Fairchild Semiconductor Corporation