HCC/HCF4030B QUAD EXCLUSIVE-OR GATE . . . . .. .. MEDIUM-SPEED OPERATION – tPHL = tPLH = 60ns (typ.) @ CL = 50pF and VDD – VSS = 10V LOW OUTPUT IMPEDANCE : 500Ω (typ.) @ VDD – VSS = 10V QUIESCENT CURRENT SPECIFIED TO 20V FOR HCC DEVICE STANDARDIZED SYMMETRICAL OUTPUT CHARACTERISTICS 5V, 10V, AND 15V PARAMETRIC RATINGS INPUT CURRENT OF 100nA AT 18V AND 25°C FOR HCC DEVICE 100% TESTED FOR QUIESCENT CURRENT MEETS ALL REQUIREMENTS OF JEDEC TENTATIVE STANDARD N° 13A, ”STANDARD SPECIFICATIONS FOR DESCRIPTION OF ”B” SERIES CMOS DEVICES” EY (Plastic Package) M1 (Micro Package) F (Ceramic Frit Seal Package) C1 (Plastic Chip Carrier) ORDER CODES : HCC4030BF HCF4030BM1 HCF4030BEY HCF4030BC1 PIN CONNECTIONS DESCRIPTION The HCC4030B (extended temperature range) and HCF4030B (intermediate temperature range) are monolithic integrated circuit, available in 14-lead dual in-line plastic or ceramic package and plastic micro package. The HCC/HCF4030B types consist of four independent exclusive-OR gates integrated on a single monolithic silicon chip. Each exclusive-OR gate consists of four n-channel and four p-channel enhancement-type transistors. All inputs and outputs are protected against electrostatic effects. November 1996 1/12 HCC/HCF4030B FUNCTIONAL DIAGRAM ABSOLUTE MAXIMUM RATINGS Symbol V DD * Parameter Supply Voltage : HCC Types HCF Types Value Unit – 0.5 to + 20 – 0.5 to + 18 V V Vi Input Voltage – 0.5 to V DD + 0.5 V II DC Input Current (any one input) ± 10 mA Total Power Dissipation (per package) Dissipation per Output Transistor for Top = Full Package-temperature Range 200 mW 100 mW P tot T op Operating Temperature : HCC Types HCF Types – 55 to + 125 – 40 to + 85 °C °C T s tg Storage Temperature – 65 to + 150 °C Stresses above those listed under ”Absolute Maximum Ratings” may cause permanent damage to the device. This is a stress rating only and functional operation of the device at these or any other conditions above those indicated in the operational sections of this specification is not implied. Exposure to absolute maximum rating conditions for external periods may affect device reliability. RECOMMENDED OPERATING CONDITIONS Symbol V DD Parameter Supply Voltage : HCC Types HC F Types VI Input Voltage Top Operating Temperature : HCC Types H CF Types TRUTH TABLE One of Four Identical Gates A B J 0 1 0 1 0 0 1 0 0 1 1 0 Where ”1” = High level ”0” = Low level. 2/12 Value Unit 3 to 18 3 to 15 V V 0 to V DD V – 55 to + 125 – 40 to + 85 °C °C HCC/HCF4030B STATIC ELECTRICAL CHARACTERISTICS (over recommended operating conditions) Test Conditions Symbol IL V OH V OL V IH V IL I OH I OL I IH , I IL CI Parameter Quiescent Current VI (V) 5 1 0.02 1 HCC 0/10 Types 0/15 10 2 0.02 2 60 15 4 0.02 4 120 0/20 20 20 0.04 20 600 0/ 5 HCF 0/10 Types 0/15 5 4 0.02 4 30 10 8 0.02 8 60 15 16 0.02 16 120 Output Low Voltage <1 5 4.95 4.95 4.95 0/10 <1 10 9.95 9.95 9.95 0/15 <1 15 14.95 14.95 14.95 5/0 <1 5 0.05 0.05 0.05 <1 10 0.05 0.05 0.05 15/0 <1 15 0.05 0.05 0.05 Input Leakage Current 0.5/4.5 <1 5 3.5 3.5 3.5 1/9 <1 10 7 7 7 1.5/13.5 < 1 15 11 4.5/0.5 <1 5 1.5 1.5 1.5 9/1 <1 10 3 3 3 13.5/1.5 < 1 15 4 4 4 0/ 5 2.5 HCC 0/ 5 Types 0/10 0/15 13.5 15 0/ 5 2.5 5 0/ 5 HCF Types 0/10 4.6 5 9.5 10 0/15 13.5 0/ 5 HCC 0/10 Types 0/15 0/ 5 HCF 0/10 Types 0/15 HCC 0/18 Types 5 – 2 4.6 5 9.5 10 – 1.15 – 0.64 – 0.51 – 1 – 0.36 – 1.6 – 1.3 – 2.6 – 0.9 – 4.2 – 3.4 – 6.8 – 2.4 – 1.53 – 1.36 – 3.2 – 1.1 – 0.52 – 0.44 – 1 – 0.36 – 1.3 – 1.1 – 2.6 – 0.9 15 – 3.6 – 3.0 – 6.8 – 2.4 0.4 5 0.64 0.51 1 0.36 0.5 10 1.6 1.3 2.6 0.9 1.5 15 4.2 3.4 6.8 2.4 0.4 5 0.52 0.44 1 0.36 0.5 10 1.3 1.1 2.6 0.9 1.5 15 3.6 3.0 6.8 2.4 V 18 ± 0.1 ±10 –5 15 ± 0.3 ±10 –5 5 mA ± 0.1 ± 1 ± 0.3 ± 1 7.5 V mA Any Input Any Input V 11 – 1.6 – 3.2 HCF 0/15 Types Input Capacitance 11 µA V 10/0 Input Low Voltage Unit 30 0/ 5 Input High Voltage Output Sink Current |I O | V D D T L o w* 25 °C T Hi g h * (µA) (V) Min. Max. Min. Typ. Max. Min. Max. 0/ 5 Output High Voltage Output Drive Current VO (V) Value µA pF * TLo w = – 55°C for HCC device : – 40°C for HCF device. * THigh = + 125°C for HCC device : + 85°C for HCF device. The Noise Margin for both ”1” and ”0” level is : 1V min. with VDD = 5V, 2V min. with VDD = 10V, 2.5 V min. with VDD = 15V. 3/12 HCC/HCF4030B DYNAMIC ELECTRICAL CHARACTERISTICS (T amb = 25°C, CL = 50pF, R L = 200kΩ, typical temperature coefficient for all V D D = 0.3%/°C values, all input rise and fall time = 20ns) Symbol Parameter t PL H, t PHL Propagation Delay Time t T L H, t THL Transition Time Test Conditions Value V C C (V) Min. Typ. Max. 5 140 280 10 65 130 15 50 100 5 100 200 10 50 100 15 40 80 Unit ns ns Typical Output Low (sink) Current Characteristics. Minimum Output Low (sink) Current Characteristics. Typical Output High (source) Current Characteristics. Minimum Output High (source) Current Characteristics. 4/12 HCC/HCF4030B TYPICAL APPLICATIONS EVEN-PARITY-BIT GENERATOR (1-3/4 x HCC/HCF4030B). EVEN-PARITY-CHECKER (2 x HCC/HCF4030B). ODD-PARITY-BIT GENERATOR (2 x HCC/HCF4030B). ODD-PARITY CHECKER (2 x HCC/HCF4030B). 5/12 HCC/HCF4030B TYPICAL APPLICATIONS (continued) 8-BIT COMPARATOR 8-BIT TWO’S COMPLEMENT ADDER-SUBSTRACTOR 6/12 HCC/HCF4030B Table 1 : Two’s Complement Numbers and Their Equivalent Decimal Values. X8 0 0 0 0 X7 0 0 0 0 X6 0 0 0 0 X5 0 0 0 0 X4 0 0 0 0 X3 0 0 0 0 X2 0 0 1 1 X1 0 1 0 1 = = = = 0 1 2 3 X8 1 1 1 1 1 X7 1 1 1 1 1 X6 1 1 1 1 1 X5 1 1 1 1 1 X4 1 1 1 1 1 X3 1 1 1 1 0 X2 1 1 0 0 1 X1 1 0 1 0 1 = = = = = -1 -2 -3 -4 -5 0 0 1 1 1 1 1 1 1 1 1 1 1 1 0 1 = = 126 127 1 1 0 0 0 0 0 0 0 0 0 0 0 0 1 0 = = -127 -128 The two’s complement adder-substractor ple : a) 2 SIGN + = BIT –5 X 0 0 0 0 0 0 1 Y 1 1 1 1 1 0 1 CI S 0 1 1 1 1 1 1 0 CO can add or substract any two of the numbers in table 1. For exam- 0 2 + 1 –5 + 0 1 = –3 SIGN b) –2 BIT – = X 1 –5 Y 1 Y 0 CL S 1 0 CO 1 1 0 1 1 0 1 1 0 1 1 0 1 0 1 1 1 0 0 0 0 0 0 1 0 –2 + 1 –5 0 + 1 1 =3 TEST CIRCUITS Quiescent Device Current. Input Voltage. Input Leakage Current. 7/12 HCC/HCF4030B Plastic DIP14 MECHANICAL DATA mm DIM. MIN. a1 0.51 B 1.39 TYP. inch MAX. MIN. TYP. MAX. 0.020 1.65 0.055 0.065 b 0.5 0.020 b1 0.25 0.010 D 20 0.787 E 8.5 0.335 e 2.54 0.100 e3 15.24 0.600 F 7.1 0.280 I 5.1 0.201 L Z 3.3 1.27 0.130 2.54 0.050 0.100 P001A 8/12 HCC/HCF4030B Ceramic DIP14/1 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 20 0.787 B 7.0 0.276 D E 3.3 0.130 0.38 e3 0.015 15.24 0.600 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 H 1.17 1.52 0.046 0.060 L 0.22 0.31 0.009 0.012 M 1.52 2.54 0.060 0.100 N P Q 10.3 7.8 8.05 5.08 0.406 0.307 0.317 0.200 P053C 9/12 HCC/HCF4030B SO14 MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 1.75 0.1 0.2 a2 MAX. 0.068 0.003 0.007 1.65 0.064 b 0.35 0.46 0.013 0.018 b1 0.19 0.25 0.007 0.010 C 0.5 0.019 c1 45° (typ.) D 8.55 8.75 0.336 0.344 E 5.8 6.2 0.228 0.244 e 1.27 e3 0.050 7.62 0.300 F 3.8 4.0 0.149 0.157 G 4.6 5.3 0.181 0.208 L 0.5 1.27 0.019 0.050 M S 0.68 0.026 8° (max.) P013G 10/12 HCC/HCF4030B PLCC20 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A 11/12 HCC/HCF4030B Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1996 SGS-THOMSON Microelectronics - Printed in Italy - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - Canada - China - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A . 12/12