STMICROELECTRONICS L9351

L9351
HIGH SIDE DRIVER
..
..
..
..
ADVANCE DAT A
LOW SATURATION VOLTAGE
TTL COMPATIBLE INPUT
WIDE SUPPLY VOLTAGE
VERY LOW QUIESCENT CURRENT
(30mA max)
NO EXTERNAL COMPONENTS
INTERNAL RECIRCULATION PATH FOR
FAST DECAY OF INDUCTIVE LOAD CURRENT
SHORT CIRCUIT PROTECTION
FAILSAFE OPERATION : OUTPUT IS OFF IF
THE LOGIC INPUT IS LEFT OPEN
Pentawatt
ORDERING NUMBER : L9351
DESCRIPTION
The L9351 is a monolithic integrated circuit designed to drive grounded resistive, inductive or mixed
loads from the power supply positive side. Very low
standby current (30mA max.) and internally implemented protections against load dump and reverse
voltages make the device very useful in automotive
applications. No external components are required
because the output recirculation clamping zener is
included in the chip. This zener can withstand a recirculation peak current of 550mA on a 80mH/25Ω
load.
The device is self-protected against overtemperature, overvoltage and overcurrent conditions. The
L9351 operates over the full battery voltage range,
from 4.5V (cold cranking) up to 24V (jump starting).
The L9351 withstands revers battery conditions (13V) and supply voltage transients up to 80V limiting the maximum output transistor VEC to 70V by an
internalzener. ON and OFFdelaytimes of 25µs max
in any outputstatus, includingrecirculating situation,
allow PWM use of L9351.
BLOCK DIAGRAM
October 1992
This is advanced information on a new product now in development or undergoing evaluation. Details are subject to change without notice.
1/6
L9351
PIN CONNECTION (top view)
Note : Pin 3 must be left open or connected to ground.
ABSOLUTE MAXIMUM RATINGS
Symbol
VS
Value
Unit
D.C. Supply Voltage
D.C. Reverse Supply Voltage
Load Dump: 5ms ≤ trise ≤ 10ms
τf Fall Time Constant = 100ms, Rsource ≥ 0.5Ω
Parameter
24
–13
60
V
V
V
Low Energy Spikes: Rsource ≥ 10Ω, trise = 1µs,
tf = 2ms, fr Repetition Frequency = 0.2Hz
±85
V
–0.3 to 7
V
Vi
Input Voltage
IO
Output Current
Ptot
Tj, Tstg
Internally Limited
Total Power Dissipation at Tcase = 90°C
Junction and Storage Temperature
17.1
W
–55 to 150
°C
Value
Unit
80
3.5
°C/W
°C/W
THERMAL DATA
Symbol
Rth j-amb
R th j-case
2/6
Parameter
Thermal Resistance Junction-ambient
Thermal Resistance Junction-case
Max.
Max.
L9351
ELECTRICAL CHARACTERISTICS
(VS = 14.4V, – 40°C ≤ Tj ≤ + 125°C unless otherwise specified).
Symbol
Parameter
VS
Operating Supply Voltage
VIH
Input Voltage High
VIL
Input Voltage Low
Test Conditions
Min.
Typ.
4.5
4.5 < VS < 24
Max.
24
2.0
Unit
V
V
0.8
V
Input Current
0.8 < VI < 5.5V
40
µA
IPL
Output Leakage Current
VO = 0V
VI < 0.8V
VS = 24V
140
µA
Vsat
Output Saturation Voltage
II
ISC
Output Short Circuit Current
IQ
Quiescent Current
1
IO = 125mAVS = 4.5V
0.5
V
IO = 225mAVS = 14.4V
0.5
V
IO = 550mAVS = 14.4V
0.7
V
0.6
1.5
VI > 2V
VI < 0.8V Stand-by Condition
VZO
Negative Output Zener Voltage
RL = 25Ω
L = 80mH
on VI Transition from ”1” to ”0”
Ton
Turn ON Delay
Toff
Turn OFF Delay
Resistive Load R L = 25Ω,
Tj = 25°C (fig.2)
– 36
A
30
mA
100
150
µA
– 30
– 24
V
20
µs
25
µs
Figure 1 : Typical Automotive Application Circuit.
3/6
L9351
Figure 2 : Resistive Load.
Figure 3 : Inductive Load.
4/6
L9351
PENTAWATT PACKAGE MECHANICAL DATA
mm
DIM.
MIN.
inch
TYP.
MAX.
A
4.8
C
1.37
D
MIN.
TYP.
MAX.
0.189
0.054
2.4
2.8
0.094
0.110
D1
1.2
1.35
0.047
0.053
E
0.35
0.55
0.014
0.022
F
0.8
1.05
0.031
0.041
F1
1
1.4
0.039
0.055
G
3.4
0.126
0.134
0.142
G1
6.8
0.260
0.268
0.276
H2
10.4
H3
10.05
0.409
10.4
0.396
0.409
L
17.85
0.703
L1
15.75
0.620
L2
21.4
0.843
L3
22.5
0.886
L5
2.6
3
0.102
0.118
L6
15.1
15.8
0.594
0.622
L7
6
6.6
0.236
0.260
M
4.5
0.177
M1
4
0.157
Dia
3.65
3.85
0.144
0.152
E
L
D1
C
D
M
A
M1
L1
L2
L5
G1
G
H3
L3
L7
F
H2
F1
Dia.
L6
5/6
L9351
Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsibility for
the consequences of use of such information nor for any infringement of patents or other rights of third parties which may result from its
use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use as critical components in life support devices or
systems without express written approval of SGS-THOMSON Microelectronics.
 1994 SGS-THOMSON Microelectronics - All Rights Reserved
HEPTAWATT is a Trademark of SGS-THOMSON Microelectronics
SGS-THOMSON Microelectronics GROUP OF COMPANIES
Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands - Singapore Spain - Sweden - Switzerland - Taiwan - Thaliand - United Kingdom - U.S.A.
6/6