M54HC7240/7241/7244 M74HC7240/7241/7244 OCTAL BUS BUFFER WITH 3 STATE OUTPUTS HC7240: INVERTED - HC7241/7244 NON INVERTED . . . . . . . . HIGH SPEED tPD = 15 ns (TYP.) at VCC = 5V LOW POWER DISSIPATION o ICC = 4 µA (MAX.) at TA = 25 C HIGH NOISE IMMUNITY VH = 1.1 V(TYP.) at VCC = 5V OUTPUT DRIVE CAPABILITY 15 LSTTL LOADS SYMMETRICAL OUTPUT IMPEDANCE |IOH| = IOL = 6 mA (MIN) BALANCED PROPAGATION DELAYS tPLH = tPHL WIDE OPERATING VOLTAGE RANGE VCC (OPR) = 2V to 6V PIN AND FUNCTION COMPATIBLE WITH 54/74LS240/241/244 B1R (Plastic Package) F1R (Ceramic Package) M1R (Micro Package) C1R (Chip Carrier) ORDER CODES : M54HCXXXXF1R M74HCXXXXM1R M74HCXXXXB1R M74HCXXXXC1R DESCRIPTION The M54/74HC7240, HC7241 and HC7244 are high speed CMOS OCTAL BUS BUFFERs fabricated in silicon gate C2MOS technology. They have the same high speed performance of LSTTL combined with true CMOS low power consumption. The designer has a choise of select combination of inverting and non-inverting outputs, symmetrical G (active low output control) input, and complementary G and G inputs. Each control input governs four BUS BUFFERs. The HC7240, HC7241 and HC7244 have the same pin configuration and function as the HC240, HC241 and HC244 and they have a hysteresis characteristics with each input so can be used as a line receiver, etc. All inputs are equipped with protection circuits against static discharge and transient excess voltage. PIN CONNECTION (top view) HC7240 October 1993 HC7241 HC7244 1/12 M54/M74HC7240/7241/7244 CHIP CARRIER HC7240 HC7241 INPUT AND OUTPUT EQUIVALENT CIRCUIT PIN DESCRIPTION (HC7241) PIN No SYMBOL 1 1G 2, 4, 6, 8 9, 7, 5, 3 1A1 to 1A4 2Y1 to 2Y4 Data Inputs Data Outputs 11, 13, 15, 17 2A1 to 2A4 18, 16, 14, 12 1Y1 to 1Y4 19 10 2G GND 20 V CC 2/12 NAME AND FUNCTION HC7244 PIN DESCRIPTION (HC7240) PIN No 1 SYMBOL 1G 2, 4, 6, 8 1A1 to 1A4 Data Inputs 9, 7, 5, 3 2Y1 to 2Y4 Data Outputs 11, 13, 15, 17 2A1 to 2A4 Data Inputs 18, 16, 14, 12 1Y1 to 1Y4 Data Outputs 19 2G 10 20 GND VCC NAME AND FUNCTION Output Enable Input Output Enabel Input Ground (0V) Positive Supply Voltage PIN DESCRIPTION (HC7244) PIN No SYMBOL 1 1G 2, 4, 6, 8 9, 7, 5, 3 1A1 to 1A4 2Y1 to 2Y4 Data Inputs Data Outputs Data Inputs 11, 13, 15, 17 2A1 to 2A4 Data Inputs Data Outputs 18, 16, 14, 12 1Y1 to 1Y4 Data Outputs Output Enabel Input Ground (0V) 19 10 2G GND Output Enabel Input Ground (0V) Positive Supply Voltage 20 VCC Positive Supply Voltage Output Enable Input NAME AND FUNCTION Output Enable Input M54/M74HC7240/7241/7244 IEC LOGIC SYMBOLS HC7240 HC7241 HC7244 TRUTH TABLE INPUT OUTPUT G L L G (HC7241) H H An L H Yn (HC7240) H L Yn (HC7241) L H Yn (HC7244) L H H L X Z Z Z X: ”H” or ”L” Z: High impedance CIRCUIT SCHEMATIC (1/8 PACKAGE) HC7240 HC7244 3/12 M54/M74HC7240/7241/7244 ABSOLUTE MAXIMUM RATINGS Symbol Value Unit VCC VI Supply Voltage DC Input Voltage -0.5 to +7 -0.5 to VCC + 0.5 V V VO DC Output Voltage -0.5 to VCC + 0.5 V IIK IOK DC Input Diode Current DC Output Diode Current ± 20 ± 20 mA mA IO DC Output Source Sink Current Per Output Pin ± 35 mA DC VCC or Ground Current ± 70 mA 500 (*) mW ICC or IGND Parameter PD Power Dissipation Tstg TL Storage Temperature Lead Temperature (10 sec) -65 to +150 300 o o C C Absolute Maximum Ratings are those values beyond which damage to the device may occur. Functional operation under these condition isnotimplied. (*) 500 mW: ≅ 65 oC derate to 300 mW by 10mW/oC: 65 oC to 85 oC RECOMMENDED OPERATING CONDITIONS Symbol VCC Parameter Supply Voltage VI Input Voltage VO Top Output Voltage Operating Temperature: 4/12 M54HC Series M74HC Series Value 2 to 6 Unit V 0 to VCC V 0 to VCC -55 to +125 -40 to +85 V C o C o M54/M74HC7240/7241/7244 DC SPECIFICATIONS Test Conditions Symbol VP VN VH V OH Parameter High Level Threshold Voltage Low Level Threshold Voltage Hysteresis Voltage High Level Output Voltage VCC (V) 2.0 1.0 1.25 1.5 1.0 1.5 1.0 1.5 4.5 6.0 2.3 3.0 2.7 3.5 3.15 4.2 2.3 3.0 3.15 4.2 2.3 3.0 3.15 4.2 2.0 0.3 0.65 0.9 0.3 0.9 0.3 0.9 4.5 1.13 1.6 2.0 1.13 2.0 1.13 2.0 6.0 1.5 2.3 2.6 1.5 2.6 1.5 2.6 2.0 0.3 0.6 1.0 0.3 1.0 0.3 1.0 4.5 6.0 0.6 0.8 1.1 1.2 1.4 1.7 0.6 0.8 1.4 1.7 0.6 0.8 1.4 1.7 2.0 II IOZ ICC Low Level Output Voltage -40 to 85 oC -55 to 125 oC 74HC 54HC Min. Max. Min. Max. Unit V V V VI = IO=-20 µA VIH or V IL IO=-6.0 mA 1.9 2.0 1.9 1.9 4.4 5.9 4.5 6.0 4.4 5.9 4.4 5.9 4.18 4.31 4.13 4.10 IO=-7.8 mA 5.68 5.8 0.0 5.63 5.60 0.1 0.1 0.1 IO= 20 µA 0.0 0.1 0.1 0.1 6.0 4.5 IO= 6.0 mA 0.0 0.17 0.1 0.26 0.1 0.33 0.1 0.40 6.0 IO= 7.8 mA 0.18 0.26 0.33 0.40 ±0.1 ±1 ±1 µA ±0.5 ±5 ±10 µA 4 40 80 µA 4.5 6.0 4.5 VOL Value TA = 25 oC 54HC and 74HC Min. Typ. Max. 6.0 2.0 4.5 Input Leakage Current 3 State Output Off State Current VI = VIH or VIL 6.0 VO = VCC or GND VI = VCC or GND 6.0 Quiescent Supply Current 6.0 VI = VCC or GND V V 5/12 M54/M74HC7240/7241/7244 AC ELECTRICAL CHARACTERISTICS (C L = 50 pF, Input t r = tf = 6 ns) Test Conditions o Symbol Parameter VCC (V) CL (pF) tTLH tTHL Output Transition Time 2.0 4.5 50 tPLH tPHL Propagation Delay Time 6.0 2.0 4.5 6.0 tPZL tPZH Output Enable Time tPLZ tPHZ Output Disable Time CIN COUT Input Capacitance Output Capacitance Power Dissipation Capacitance 2.0 4.5 6.0 2.0 4.5 TA = 25 C 54HC and 74HC Min. 50 50 RL = 1KΩ 50 RL = 1KΩ 6.0 CPD (*) HC7240 HC7241/7244 Value -40 to 85 oC -55 to 125 oC 74HC 54HC Typ. 25 7 Max. 60 12 6 50 15 13 10 125 25 21 13 155 31 26 68 21 16 48 21 150 30 26 150 30 190 38 32 190 38 19 5 10 26 10 32 10 33 34 Min. Max. 75 19 Min. Unit Max. ns ns ns ns 10 pF pF pF (*) CPD is defined as the value of the IC’s internal equivalent capacitance which is calculated from the operating current consumption without load. (Refer to Test Circuit). Average operting current can be obtained by the following equation. ICC(opr) = CPD •VCC •fIN + ICC/8 (per channel) TEST CIRCUIT ICC (Opr.) 6/12 M54/M74HC7240/7241/7244 SWITCHING CHARACTERISTICS TEST CIRCUIT HC7240 HC7241/HC7244 7/12 M54/M74HC7240/7241/7244 Plastic DIP20 (0.25) MECHANICAL DATA mm DIM. MIN. a1 0.254 B 1.39 TYP. inch MAX. MIN. TYP. MAX. 0.010 1.65 0.055 0.065 b 0.45 0.018 b1 0.25 0.010 D 25.4 1.000 E 8.5 0.335 e 2.54 0.100 e3 22.86 0.900 F 7.1 0.280 I 3.93 0.155 L Z 3.3 0.130 1.34 0.053 P001J 8/12 M54/M74HC7240/7241/7244 Ceramic DIP20 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 25 0.984 B 7.8 0.307 D E 3.3 0.5 e3 0.130 1.78 0.020 22.86 0.070 0.900 F 2.29 2.79 0.090 0.110 G 0.4 0.55 0.016 0.022 I 1.27 1.52 0.050 0.060 L 0.22 0.31 0.009 0.012 M 0.51 1.27 0.020 0.050 N1 P Q 4° (min.), 15° (max.) 7.9 8.13 5.71 0.311 0.320 0.225 P057H 9/12 M54/M74HC7240/7241/7244 SO20 MECHANICAL DATA mm DIM. MIN. TYP. A a1 inch MAX. MIN. TYP. 2.65 0.10 0.104 0.20 a2 MAX. 0.004 0.007 2.45 0.096 b 0.35 0.49 0.013 0.019 b1 0.23 0.32 0.009 0.012 C 0.50 0.020 c1 45° (typ.) D 12.60 13.00 0.496 0.512 E 10.00 10.65 0.393 0.419 e 1.27 0.050 e3 11.43 0.450 F 7.40 7.60 0.291 0.299 L 0.50 1.27 0.19 0.050 M S 0.75 0.029 8° (max.) P013L 10/12 M54/M74HC7240/7241/7244 PLCC20 MECHANICAL DATA mm DIM. MIN. TYP. inch MAX. MIN. TYP. MAX. A 9.78 10.03 0.385 0.395 B 8.89 9.04 0.350 0.356 D 4.2 4.57 0.165 0.180 d1 2.54 0.100 d2 0.56 0.022 E 7.37 8.38 0.290 0.330 e 1.27 0.050 e3 5.08 0.200 F 0.38 0.015 G 0.101 0.004 M 1.27 0.050 M1 1.14 0.045 P027A 11/12 M54/M74HC7240/7241/7244 Information furnished is believed to be accurate and reliable. However, SGS-THOMSON Microelectronics assumes no responsability for the consequences of use of such information nor for any infringement of patents or other rights of third parties which may results from its use. No license is granted by implication or otherwise under any patent or patent rights of SGS-THOMSON Microelectronics. Specifications mentioned in this publication are subject to change without notice. This publication supersedes and replaces all information previously supplied. SGS-THOMSON Microelectronics products are not authorized for use ascritical components in life support devices or systems without express written approval of SGS-THOMSON Microelectonics. 1994 SGS-THOMSON Microelectronics - All Rights Reserved SGS-THOMSON Microelectronics GROUP OF COMPANIES Australia - Brazil - France - Germany - Hong Kong - Italy - Japan - Korea - Malaysia - Malta - Morocco - The Netherlands Singapore - Spain - Sweden - Switzerland - Taiwan - Thailand - United Kingdom - U.S.A 12/12