TS3Y Vishay Sfernice Surface Mount Miniature Trimmers 3mm Single-Turn Cermet Sealed FEATURES • 0.125 Watt at 70°C • Excellent Stability • Small Size for Optimum Packing Density • Suitable for both Manual and Automatic Operation DIMENSIONS in millimeters TS3 YJ 3.2 2.2 1.3 2 0.9 0.9 Adjustment slot 0.51wide x 1.93 long x 0.51 deep 3.5 0.15 0.65 3 1 2.25 RECOMMENDED SOLDERING AREAS CIRCUIT DIAGRAM a c (1) (3) 1.6 b (2) 1.6 4.5 0.6 0.65 1.6 1.1 cw SOLDERING RECOMMENDATIONS Vapor phase: 215°C/20 to 40 seconds. Reflow: 230°C/20 seconds. Do not exceed peak 260°C or with an IRON 40W: 3 seconds at 350°C. 1.1 Soldering is possible by wave, reflow, and vapour phase. ELECTRICAL SPECIFICATIONS Resistive Element Electrical Travel Resistance Range Stocked Range Standard Series Tolerance Standard Power Rating Temp. Coefficient (Max.) Limiting Element Voltage (Max.) Contact Resistance Variation End Resistance Dielectric Strength (Rms) Insulation Resistance Document Number: 51041 Revision: 19-Jan-04 Cermet 220° 10Ω to 2MΩ 1KΩ to 100KΩ 1-2-5 ± 20% 0.125W at 70°C ± 150ppm/°C 200V 3% or 3Ω 1% or 3Ω 500V 100MΩ For technical questions, contact: [email protected] www.vishay.com 11 TS3Y Vishay Sfernice Surface Mount Miniature Trimmers 3mm Single-Turn Cermet Sealed MECHANICAL SPECIFICATIONS Mechanical Travel Operating Torque (max. Ncm) End Stop Torque ( min. Ncm) Unit Weight (max. g) Mechanical Life (Cycles) STANDARD RESISTANCE TABLE 250° 0.5 2 0.1 50 RESISTANCE PART MARKING CODE RESISTANCE CODE 10 20 50 A1 21 51 100 200 500 100 200 500 1.000 2.000 5.000 10.000 20.000 50.000 100.000 A2 22 52 A3 23 53 A4 24 54 A5 101 201 501 102 202 502 103 203 503 104 200.000 500.000 1.000.000 2.000.000 25 55 A6 26 204 504 105 205 ENVIRONMENTAL SPECIFICATIONS Temperature Range Sealing – 55°C + 125°C sealed container IP 67 PACKAGING SPECIFICATIONS Reel of 1000 pieces. 5.52 ± 0.18 4 K 0 4.0 ± 0.1 5 Ø 178 ± 2.03 2.67 ± 0.2 2.0 ± 0.1 3.8 ± 0.2 1.5 ± 0.1 60 ± 2.03 1.5 ± 0.2 Equal spaced 3 plcs. 1.78 min. 1.75 ± 0.1 12 ± 0.2 4.0 ± 0.1 2.5 ± 0.1 Ø 13 ± 0.51 0.3 ± 0.1 Ø 21.01 ± 0.79 12.40 + 2.00 ORDERING INFORMATION TS3 SERIES 500kΩ OHMIC VALUE YJ STYLE ± 20% TOLERANCE TR1000 PACKAGING TR1000 = tape and reel 1000 pcs. SAP PART NUMBERING GUIDELINES T S MODEL 3 Y J 5 STYLE 0 OHMIC VALUE 4 M TOL R 1 PACKAGING CODE 5 SPECIAL (IF APPLICABLE) See the end of this data book for conversion tables www.vishay.com 12 For technical questions, contact: [email protected] Document Number: 51041 Revision: 19-Jan-04