ICTE5 thru ICTE18C, 1N6373 thru 1N6386 www.vishay.com Vishay General Semiconductor TRANSZORB® Transient Voltage Suppressors FEATURES • Glass passivated chip junction • Available in uni-directional and bi-directional • 1500 W peak pulse power capability with a 10/1000 μs waveform, repetitive rate (duty cycle): 0.01 % • Excellent clamping capability • Very fast response time Case Style 1.5KE • Low incremental surge resistance • Solder dip 275 °C max. 10 s, per JESD 22-B106 • AEC-Q101 qualified • Material categorization: For definitions of compliance please see www.vishay.com/doc?99912 PRIMARY CHARACTERISTICS VWM 5.0 V to 18 V VBR (uni-directional) 6.0 V to 21.2 V VBR (bi-directional) 9.2 V to 21.2 V PPPM 1500 W PD 6.5 W IFSM 200 A TJ max. 175 °C Polarity Uni-directional, bi-directional Package 1.5KE TYPICAL APPLICATIONS Use in sensitive electronics protection against voltage transients induced by inductive load switching and lighting on ICs, MOSFET, signal lines of sensor units for consumer, computer, industrial, and telecommunication. MECHANICAL DATA Case: Molded epoxy body over passivated junction Molding compound meets UL 94 V-0 flammability rating Base P/N-E3 - RoHS compliant and commercial grade Base P/NHE3 - RoHS compliant and AEC-Q101 qualified DEVICES FOR BI-DIRECTION APPLICATIONS Terminals: Matte tin plated leads, solderable per J-STD-002 and JESD 22-B102 E3 suffix meets JESD 201 class 1A whisker test, HE3 suffix meets JESD 201 class 2 whisker test For bi-directional types, use C suffix (e.g. ICTE18C). Electrical characteristics apply in both directions. Polarity: For uni-directional types the color band denotes cathode end, no marking on bi-directional types MAXIMUM RATINGS (TA = 25 °C unless otherwise noted) PARAMETER SYMBOL LIMIT UNIT Peak pulse power dissipation with a 10/1000 μs waveform (1) (fig. 1) PPPM 1500 W Peak pulse current with a 10/1000 μs waveform (1) (fig. 3) IPPM See next table A Power dissipation on infinite heatsink at TL = 75 °C (fig. 8) Peak forward surge current 8.3 ms single half sine-wave uni-directional only (2) Maximum instantaneous forward voltage at 100 A for uni-directional only Operating junction and storage temperature range PD 6.5 W IFSM 200 A VF 3.5 V TJ, TSTG - 55 to + 175 °C Notes (1) Non-repetitive current pulse, per fig. 3 and derated above T = 25 °C per fig. 2 A (2) 8.3 ms single half sine-wave, duty cycle = 4 pulses per minute maximum Revision: 18-Sep-12 Document Number: 88356 1 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ICTE5 thru ICTE18C, 1N6373 thru 1N6386 www.vishay.com Vishay General Semiconductor ELECTRICAL CHARACTERISTICS (JEDEC REGISTERED DATA) (TA = 25 °C unless otherwise noted) MAXIMUM REVERSE LEAKAGE AT VWM ID (μA) MAXIMUM CLAMPING VOLTAGE AT IPP = 10 A VC (V) MAXIMUM PEAK PULSE CURRENT IPP (A) 7.1 7.5 160 11.3 11.5 100 13.7 14.1 90 2.0 16.1 16.5 70 2.0 20.1 20.6 60 21.2 2.0 24.2 25.2 50 STAND-OFF VOLTAGE VWM (V) MINIMUM BREAKDOWN VOLTAGE AT 1.0 mA VBR (V) ICTE5 (2) 5.0 6.0 300 1N6374 ICTE8 8.0 9.4 25.0 1N6375 ICTE10 10.0 11.7 2.0 1N6376 ICTE12 12.0 14.1 1N6377 ICTE15 15.0 17.6 1N6378 ICTE18 18.0 JEDEC TYPE NUMBER GENERAL SEMICONDUCTOR PART NUMBER MAXIMUM CLAMPING VOLTAGE AT IPP = 1.0 A VC (V) UNI-DIRECTIONAL TYPES 1N6373 (2) BI-DIRECTIONAL TYPES 1N6382 ICTE8C 8.0 9.4 50 11.4 11.6 100 1N6383 ICTE10C 10.0 11.7 2.0 14.1 14.5 90 1N6384 ICTE12C 12.0 14.1 2.0 16.7 17.1 70 1N6385 ICTE15C 15.0 17.6 2.0 20.8 21.4 60 1N6386 ICTE18C 18.0 21.2 2.0 24.8 25.5 50 Notes (1) “C” suffix indicates bi-directional (2) ICTE5 and 1N6373 are not available as bi-directional (3) Clamping factor: 1.33 at full rated power; 1.20 at 50 % rated power; clamping factor: the ratio of the actual V (clamping voltage) to the V C BR (breakdown voltage) as measured on a specific device ORDERING INFORMATION (Example) PREFERRED P/N UNIT WEIGHT (g) PREFERRED PACKAGE CODE BASE QUANTITY DELIVERY MODE ICTE5-E3/54 0.968 54 1400 13" diameter paper tape and reel ICTE5HE3/54 (1) 0.968 54 1400 13" diameter paper tape and reel Note (1) AEC-Q101 qualified Revision: 18-Sep-12 Document Number: 88356 2 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ICTE5 thru ICTE18C, 1N6373 thru 1N6386 www.vishay.com Vishay General Semiconductor RATINGS AND CHARACTERISTICS CURVES (TA = 25 °C unless otherwise noted) 100 000 Non-Repetitive Pulse Waveform shown in Fig. 3 TA = 25 °C CJ - Junction Capacitance (pF) PPPM - Peak Pulse Power (kW) 100 10 1 Measured at Zero Bias 10 000 Measured at Stand-Off Voltage VWM 1000 0.1 100 0.1 µs 1.0 µs 10 µs 100 µs 1.0 ms 10 ms 100 200 VBR - Breakdown Voltage (V) Fig. 1 - Peak Pulse Power Rating Curve Fig. 4 - Typical Junction Capacitance Uni-Directional 100 100 000 CJ - Junction Capacitance (pF) Peak Pulse Power (PPP) or Current (IPP) Derating in Percentage, % 10 1.0 td - Pulse Width (s) 75 50 25 Measured at Zero Bias Bi-Directional Type Non-Repetitive Pulse Waveform shown in Fig. 3 TA = 25 °C 10 000 1000 Measured at Stand-Off Voltage VWM 100 0 0 25 50 75 100 125 150 175 1.0 200 TJ - Initial Temperature (°C) 150 Peak Value IPPM 100 Half Value - IPP IPPM 2 50 100 200 Fig. 5 - Typical Junction Capacitance IFSM - Peak Forward Surge Current (A) TJ = 25 °C Pulse Width (td) is defined as the Point where the Peak Current decays to 50 % of IPPM tr = 10 µs 10 VBR - Breakdown Voltage (V) Fig. 2 - Pulse Power or Current vs. Initial Junction Temperature IPPM - Peak Pulse Current, % IRSM TJ = 25 °C f = 1.0 MHz Vsig = 50 mVp-p 10/1000 µs Waveform as defined by R.E.A. td 0 200 TJ = TJ max. 8.3 ms Single Half Sine-Wave 100 50 10 0 1.0 2.0 3.0 t - Time (ms) Fig. 3 - Pulse Waveform Revision: 18-Sep-12 4.0 1 5 10 50 100 Number of Cycles at 60 Hz Fig. 6 - Maximum Non-Repetitive Forward Surge Current Uni-Directional Only Document Number: 88356 3 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 ICTE5 thru ICTE18C, 1N6373 thru 1N6386 www.vishay.com Vishay General Semiconductor 8.0 Uni-Directional Only TA = 25 °C PD - Power Dissipation (W) 7.0 ICTE18 ICTE15 ICTE12 ICTE10 ICTE8 10 ICTE5 IPP - Peak Pulse Current (A) 50 6.0 5.0 4.0 3.0 L = 0.375" (9.5 mm) Lead Lengths 2.0 1.0 1 0 6 8 10 12 14 16 18 20 22 24 26 28 0 25 50 75 100 125 150 175 VC - Clamping Voltage (V) TL - Lead Temperature (°C) Fig. 7 - Typical Characteristics Clamping Voltage Fig. 8 - Power Derating Curve 200 PACKAGE OUTLINE DIMENSIONS in inches (millimeters) Case Style 1.5KE 1.0 (25.4) MIN. 0.210 (5.3) 0.190 (4.8) DIA. 0.375 (9.5) 0.285 (7.2) 1.0 (25.4) MIN. 0.042 (1.07) 0.038 (0.96) DIA. Revision: 18-Sep-12 Document Number: 88356 4 For technical questions within your region: [email protected], [email protected], [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as Halogen-Free follow Halogen-Free requirements as per JEDEC JS709A standards. Please note that some Vishay documentation may still make reference to the IEC 61249-2-21 definition. We confirm that all the products identified as being compliant to IEC 61249-2-21 conform to JEDEC JS709A standards. Revision: 02-Oct-12 1 Document Number: 91000