093 PMG-SI www.vishay.com Vishay BCcomponents Aluminum Capacitors Power Miniaturized General Purpose Snap-In FEATURES • Polarized aluminum electrolytic capacitors, non-solid electrolyte • Large types, miniaturized dimensions, cylindrical aluminum case insulated with a blue sleeve • Useful life: 2000 h at 85 °C • Compliant to RoHS Directive 2002/95/EC smaller dimensions 094 105 °C APPLICATIONS longer life 199 159 105 °C smaller dimensions 093 105 °C longer life 197 157 Fig. 1 QUICK REFERENCE DATA DESCRIPTION Nominal case size (Ø D x L in mm) Rated capacitance range, CR Tolerence on CR Rated voltage range, UR Category temperature range Useful life at 85 °C Useful life at 40 °C and 1.4 x IR applied Shelf life at 0 V, 85 °C Based on sectional specification VALUE 22 x 25 to 35 x 50 68 μF to 2200 μF ± 20 % 200 V to 450 V - 25 °C to + 85 °C 2000 h 36 000 h • • • • Consumer electronics Whitegood motor control Electronic drives SMPS/UPS MARKING The capacitors are marked (where possible) with the following information: • Rated capacitance (in μF) • Tolerance on rated capacitance, code letter in accordance with IEC 60062 (M for ± 20 %) • Rated voltage (in V) • Date code • Name of manufacturer • “-” sign to identify the negative terminal, visible from the top and side of the capacitor • Code number (last 8 digits) • Maximum operating temperature 500 h IEC 60384-4/EN130300/W of JISC5141 SELECTION CHART FOR CR, UR AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) CR (μF) UR (V) 68 82 100 200 - 250 - 400 22 x 25 22 x 25 420 22 x 25 - - - 450 22 x 25 22 x 30 22 x 30 25 x 25 120 - - 22 x 35 22 x 50 30 x 30 22 x 40 25 x 30 30 x 25 22 x 50 25 x 35 30 x 25 30 x 30 35 x 25 25 x 50 30 x 35 25 x 50 35 x 30 35 x 30 30 x 40 35 x 35 150 - - 22 x 30 25 x 25 180 - - 22 x 35 25 x 30 22 x 35 25 x 30 220 - 22 x 25 25 x 35 30 x 25 270 22 x 25 22 x 30 330 - 22 x 35 390 22 x 30 25 x 25 22 x 35 25 x 30 22 x 40 25 x 30 30 x 25 22 x 50 30 x 25 25 x 40 30 x 30 35 x 25 25 x 50 30 x 35 35 x 30 Revision: 23-Nov-11 Document Number: 28383 1 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 093 PMG-SI www.vishay.com Vishay BCcomponents SELECTION CHART FOR CR, UR AND RELEVANT NOMINAL CASE SIZES (Ø D x L in mm) UR (V) CR (μF) 200 250 400 420 450 35 x 35 35 x 40 30 x 50 35 x 40 35 x 45 - 35 x 45 470 22 x 35 25 x 35 560 25 x 30 25 x 40 680 820 1000 1200 1500 25 x 35 25 x 40 30 x 35 30 x 40 30 x 45 30 x 50 35 x 40 35 x 45 30 x 30 30 x 35 30 x 40 35 x 40 35 x 45 30 x 40 35 x 30 30 x 45 35 x 35 35 x 40 35 x 50 - 35 x 50 - - - - - - - 1800 2200 35 x 50 - DIMENSIONS in millimeters AND AVAILABLE FORMS ØD + Terminal 10 ± 0.1 L + 2 max. L - Terminal Bottom view 6.3 + 1 mm The minus and/or plus terminal can be marked with an imprinted sign Ø 2 ± 0.1 (2 ×) Fig. 2 - Two terminal snap-in Fig. 3 - Mounting hole diagram Table 1 DIMENSIONS in millimeters, MASS AND PACKAGING QUANTITIES NOMINAL CASE SIZE ØDxL Ø Dmax. Lmax. MASS (g) PACKAGING QUANTITIES CARDBOARD BOX DIMENSIONS LxWxH 22 x 25 22 x 30 22 x 35 22 x 40 22 x 45 22 x 50 25 x 25 25 x 30 25 x 35 25 x 40 25 x 45 25 x 50 30 x 25 30 x 30 30 x 35 30 x 40 30 x 45 30 x 50 35 x 25 35 x 30 35 x 35 35 x 40 35 x 45 35 x 50 22.5 22.5 22.5 22.5 22.5 22.5 25.5 25.5 25.5 25.5 25.5 25.5 30.5 30.5 30.5 30.5 30.5 30.5 35.5 35.5 35.5 35.5 35.5 35.5 26.5 31.5 36.5 41.5 46.5 51.5 26.5 33.5 36.5 41.5 46.5 51.5 28.5 33.5 38.5 42.5 47.5 52.5 26.5 33.5 36.5 42.5 47.5 52.5 12 16 20 23 26 29 20 22 24 27 32 38 25 30 35 40 45 50 33 40 48 55 63 72 216 216 144 144 144 72 216 216 144 144 144 144 168 168 112 112 112 112 126 126 84 84 84 84 280 x 240 x 140 280 x 240 x 140 280 x 240 x 105 280 x 240 x 105 280 x 240 x 140 280 x 240 x 105 280 x 240 x 140 280 x 240 x 140 280 x 240 x 105 280 x 240 x 105 280 x 240 x 140 280 x 240 x 140 280 x 240 x 140 280 x 240 x 140 280 x 240 x 105 280 x 240 x 105 280 x 240 x 140 280 x 240 x 140 280 x 240 x 140 280 x 240 x 140 280 x 240 x 105 280 x 240 x 105 280 x 240 x 140 280 x 240 x 140 Revision: 23-Nov-11 Document Number: 28383 2 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 093 PMG-SI www.vishay.com Vishay BCcomponents ORDERING EXAMPLE ELECTRICAL DATA SYMBOL Electrolytic capacitor 093 series DESCRIPTION CR Rated capacitance at 120 Hz 330 μF/400 V; ± 20 % IR Rated RMS ripple current at 120 Hz, 85 °C Nominal case size: Ø 25 mm x 40 mm Max. leakage current after 5 min at UR 2-terminal snap-in: Max. equivalent series resistance at 120 Hz (1) Ordering code: MAL2 09346331E3 Former 12 NC: 2222 09346331 IL5 ESR Notes • Unless otherwise specified, all electrical values in Table 2 apply at Tamb = 20 °C, P = 86 kPa to 106 kPa, RH = 45 % to 75 % (1) ESR at 100 Hz is approximately 1.05 x ESR 120 Hz Table 2 ELECTRICAL DATA AND ORDERING INFORMATION UR (V) 200 250 400 CR 120 Hz (μF) 270 390 390 470 560 680 820 1000 1200 1500 1800 1800 2200 220 270 330 390 390 470 560 680 820 1000 1200 1500 1800 68 100 150 150 180 180 220 220 220 270 270 330 330 330 390 390 390 470 470 560 560 680 820 NOMINAL CASE SIZE ØDxL (mm) 22 x 25 22 x 30 25 x 25 22 x 35 25 x 30 25 x 35 25 x 40 30 x 35 30 x 40 30 x 45 30 x 50 35 x 40 35 x 45 22 x 25 22 x 30 22 x 35 22 x 35 25 x 30 25 x 35 25 x 40 30 x 30 30 x 35 30 x 40 35 x 40 35 x 45 35 x 50 22 x 25 22 x 25 22 x 30 25 x 25 22 x 35 25 x 30 22 x 40 25 x 30 30 x 25 22 x 50 30 x 25 25 x 40 30 x 30 35 x 25 25 x 50 30 x 35 35 x 30 30 x 40 35 x 30 30 x 45 35 x 35 35 x 40 35 x 50 IR 120 Hz (A) IL5 (mA) MAX. ESR (1) 120 Hz () MAX. Z 10 kHz () ORDERING CODE MAL2093....... 1.26 1.55 1.46 1.78 1.83 2.06 2.36 2.35 2.69 3.00 3.36 2.91 3.23 1.18 1.37 1.58 1.67 1.64 1.85 2.11 2.01 2.23 2.56 3.82 3.08 3.35 0.80 0.98 1.11 1.10 1.26 1.27 1.46 1.38 1.43 1.58 1.53 1.82 1.77 1.77 2.21 1.98 2.10 2.20 2.14 2.48 2.35 2.68 3.18 1.08 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.10 1.35 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 0.54 0.80 1.20 1.20 1.44 1.44 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 0.47 0.33 0.36 0.27 0.25 0.21 0.18 0.18 0.15 0.12 0.11 0.14 0.12 0.50 0.40 0.32 0.29 0.29 0.25 0.21 0.22 0.19 0.15 0.15 0.13 0.11 2.06 1.48 1.00 1.03 0.83 0.81 0.68 0.70 0.71 0.53 0.63 0.49 0.50 0.58 0.40 0.43 0.44 0.37 0.40 0.30 0.34 0.28 0.22 0.31 0.22 0.25 0.18 0.17 0.15 0.12 0.13 0.11 0.09 0.08 0.10 0.09 0.32 0.25 0.20 0.18 0.19 0.16 0.14 0.15 0.13 0.11 0.11 0.09 0.08 1.49 1.09 0.74 0.77 0.61 0.59 0.50 0.52 0.53 0.39 0.48 0.37 0.39 0.46 0.30 0.33 0.34 0.28 0.32 0.23 0.27 0.22 0.17 52271E3 52391E3 42391E3 52471E3 42561E3 42681E3 42821E3 32102E3 32122E3 32152E3 32182E3 22182E3 22222E3 53221E3 53271E3 53331E3 53391E3 43391E3 43471E3 43561E3 33681E3 33821E3 33102E3 23122E3 23152E3 23182E3 56689E3 56101E3 56151E3 46151E3 56181E3 46181E3 56221E3 46221E3 36221E3 56271E3 36271E3 46331E3 36331E3 26331E3 46391E3 36391E3 26391E3 36471E3 26471E3 36561E3 26561E3 26681E3 26821E3 Note ESR at 100 Hz is approximately 1.05 x ESR 120 Hz (1) Revision: 23-Nov-11 Document Number: 28383 3 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 093 PMG-SI www.vishay.com Vishay BCcomponents ELECTRICAL DATA AND ORDERING INFORMATION UR (V) CR 120 Hz (μF) 420 450 100 180 180 220 220 270 270 330 330 390 470 560 560 680 82 100 120 120 150 180 180 180 220 220 220 270 270 330 330 390 390 470 560 680 NOMINAL CASE SIZE ØDxL (mm) 22 x 25 22 x 35 25 x 30 25 x 35 30 x 25 22 x 50 30 x 30 25 x 50 30 x 35 35 x 30 35 x 35 30 x 50 35 x 40 35 x 45 22 x 25 22 x 30 22 x 30 25 x 25 22 x 35 22 x 40 25 x 30 30 x 25 22 x 50 25 x 35 30 x 25 30 x 30 35 x 25 25 x 50 35 x 30 30 x 40 35 x 35 35 x 40 35 x 45 35 x 50 IR 120 Hz (A) IL5 (mA) MAX. ESR (1) 120 Hz () MAX. Z 10 kHz () ORDERING CODE MAL2093....... 0.89 1.29 1.29 1.47 1.44 1.61 1.67 1.47 1.88 2.05 2.27 2.66 2.57 2.87 0.80 0.95 1.00 1.00 1.17 1.34 1.27 1.32 1.45 1.45 1.42 1.64 1.66 2.07 1.98 2.11 2.18 2.47 2.74 3.07 0.84 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 0.74 0.90 1.08 1.08 1.35 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.50 1.44 0.81 0.78 0.67 0.69 0.54 0.56 0.43 0.46 0.47 0.37 0.31 0.34 0.28 1.77 1.45 1.26 1.29 1.01 0.85 0.86 0.86 0.66 0.73 0.76 0.61 0.68 0.46 0.50 0.42 0.43 0.35 0.30 0.25 1.05 0.59 0.57 0.50 0.52 0.39 0.41 0.31 0.35 0.37 0.28 0.25 0.27 0.23 1.31 1.07 0.95 0.97 0.76 0.63 0.65 0.65 0.49 0.56 0.59 0.47 0.54 0.35 0.39 0.32 0.33 0.27 0.23 0.20 54101E3 54181E3 44181E3 44221E3 34221E3 54271E3 34271E3 44331E3 34331E3 24391E3 24471E3 34561E3 24561E3 24681E3 57829E3 57101E3 57121E3 47121E3 57151E3 57181E3 47181E3 37181E3 57221E3 47221E3 37221E3 37271E3 27271E3 47331E3 27331E3 37391E3 27391E3 27471E3 27561E3 27681E3 Note (1) ESR at 100 Hz is approximately 1.05 x ESR 120 Hz ADDITIONAL ELECTRICAL DATA PARAMETER CONDITIONS VALUE 200 V versions US = 1.1 x UR 1V - After 5 min at UR IL5 0.02 CR x UR or 1.5 mA, whichever is smaller All case sizes 19 nH typical/25 nH max. Voltage Surge voltage Reverse voltage Current Leakage current Inductance Equivalent series inductance (ESL) Table 3 LOW TEMPERATURE CHARACTERISTIC (at 120 Hz) UR (V) (1) DESCRIPTION Impedance ratio 200 TO 450 Z (- 25 °C)/Z (+ 20 °C) 4 Note (1) Impedance ratio shall not exceed the given values Revision: 23-Nov-11 Document Number: 28383 4 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 093 PMG-SI www.vishay.com Vishay BCcomponents RIPPLE CURRENT AND USEFUL LIFE 2.4 IA IR 2.3 2.2 2.1 2.0 1.9 1.8 1.7 Lifetime multiplier 1.6 1.5 1.4 IA = Actual ripple current at 120 Hz IR = Rated ripple current at 120 Hz and 85 °C (1) Useful life at 85 °C and IR applied: 2000 h 1.3 1.2 1.1 1.0 0.8 0.5 0.0 40 (1) 50 60 70 80 Tamb (°C) 90 Fig. 4 - Multiplier of useful life as a function of ambient temperature and ripple current load Table 4 MULTIPLIER OF RIPPLE CURRENT (IR) AS A FUNCTION OF FREQUENCY IR MULTIPLIER FREQUENCY (Hz) 400 V AND 450 V 60 0.90 100 0.95 120 1.00 500 1.20 1000 1.30 10 000 1.40 Table 5 TEST PROCEDURES AND REQUIREMENTS TEST NAME OF TEST REFERENCE PROCEDURE (quick reference) REQUIREMENTS C/C: ± 30 % ESR 3 x spec. limit Useful life CECC 30301 subclause 1.8.1 Tamb = 85 °C; UR and IR applied: 2000 h IL5 spec. limit no short or open circuit, no visible damage total failure percentage: 3 % Shelf life (storage at high temperature) Revision: 23-Nov-11 IEC 60384-4/ EN130300 subclause 4.17 Tamb = 85 °C; no voltage applied; 500 h C/C: ± 20 % After test: UR to be applied for 30 min, 24 h to 48 h before measurement IL5 1 x spec. limit ESR 2 x spec. limit Document Number: 28383 5 For technical questions, contact: [email protected] THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. THE PRODUCTS DESCRIBED HEREIN AND THIS DOCUMENT ARE SUBJECT TO SPECIFIC DISCLAIMERS, SET FORTH AT www.vishay.com/doc?91000 Legal Disclaimer Notice www.vishay.com Vishay Disclaimer ALL PRODUCT, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE TO IMPROVE RELIABILITY, FUNCTION OR DESIGN OR OTHERWISE. Vishay Intertechnology, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained in any datasheet or in any other disclosure relating to any product. Vishay makes no warranty, representation or guarantee regarding the suitability of the products for any particular purpose or the continuing production of any product. To the maximum extent permitted by applicable law, Vishay disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Statements regarding the suitability of products for certain types of applications are based on Vishay’s knowledge of typical requirements that are often placed on Vishay products in generic applications. Such statements are not binding statements about the suitability of products for a particular application. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. Parameters provided in datasheets and/or specifications may vary in different applications and performance may vary over time. All operating parameters, including typical parameters, must be validated for each customer application by the customer’s technical experts. Product specifications do not expand or otherwise modify Vishay’s terms and conditions of purchase, including but not limited to the warranty expressed therein. Except as expressly indicated in writing, Vishay products are not designed for use in medical, life-saving, or life-sustaining applications or for any other application in which the failure of the Vishay product could result in personal injury or death. Customers using or selling Vishay products not expressly indicated for use in such applications do so at their own risk and agree to fully indemnify and hold Vishay and its distributors harmless from and against any and all claims, liabilities, expenses and damages arising or resulting in connection with such use or sale, including attorneys fees, even if such claim alleges that Vishay or its distributor was negligent regarding the design or manufacture of the part. Please contact authorized Vishay personnel to obtain written terms and conditions regarding products designed for such applications. No license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted by this document or by any conduct of Vishay. Product names and markings noted herein may be trademarks of their respective owners. Material Category Policy Vishay Intertechnology, Inc. hereby certifies that all its products that are identified as RoHS-Compliant fulfill the definitions and restrictions defined under Directive 2011/65/EU of The European Parliament and of the Council of June 8, 2011 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (EEE) - recast, unless otherwise specified as non-compliant. Please note that some Vishay documentation may still make reference to RoHS Directive 2002/95/EC. We confirm that all the products identified as being compliant to Directive 2002/95/EC conform to Directive 2011/65/EU. Revision: 12-Mar-12 1 Document Number: 91000