SB101G THRU SB107G Single Phase 10.0 AMPS. Glass Passivated Bridge Rectifiers Voltage Range 50 to 1000 Volts Current 10.0 Amperes SB-10 Features UL Recognized File # E-96005 Glass passivated junction Surge overload rating 175 amperes peak Low forward voltage drop High temperature soldering guaranteed: 260℃ / 10 seconds / 0.375” ( 9.5mm ) lead length at 5 lbs., ( 2.3 kg ) tension Small size, simple installation Weight: 5 grams Dimensions in inches and (millimeters) Maximum Ratings and Electrical Characteristics Rating at 25℃ambient temperature unless otherwise specified. Single phase, half wave, 60 Hz, resistive or inductive load. For capacitive load, derate current by 20% Symbol SB SB Type Number 101G 102G Maximum Recurrent Peak Reverse Voltage VRRM 50 100 Maximum RMS Voltage VRMS 35 70 Maximum DC Blocking Voltage VDC 50 100 Maximum Average Forward Rectified Current @TA = 50℃ Peak Forward Surge Current, 8.3 ms Single Half Sine-wave Superimposed on Rated Load (JEDEC method ) Maximum Instantaneous Forward Voltage @ 5.0A Maximum DC Reverse Current @ TA=25℃ at Rated DC Blocking Voltage @ TA=125℃ Typical Thermal Resistance (Note) Operating Temperature Range SB SB SB SB SB Units 103G 104G 105G 106G 107G 200 140 200 400 280 400 600 420 600 800 1000 560 700 800 1000 V V V I(AV) 10.0 A IFSM 175 A VF 1.1 V 5 500 5 -55 to +150 -55 to +150 uA uA ℃/W ℃ ℃ IR RθJC TJ TSTG Note: Thermal Resistance from Junction to Case per Leg. Storage Temperature Range - 756 - RATINGS AND CHARACTERISTIC CURVES (SB101G THRU SB107G) FIG.2- MAXIMUM FORWARD CURRENT DERATING CURVE FIG.1- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER BRIDGE ELEMENT 12 AVERAGE FORWARD CURRENT. (A) PEAK FORWARD SURGE CURRENT. (A) 350 300 8.3ms Single Half Sine Wave 250 200 150 100 50 0 1 2 5 10 20 50 10 8 6 4 2 0 100 MOUNTED ON 4X4 INCH COPPER PC BOARD 0.5"(12.7mm) LEAD LENGTH 0 50 150 100 o AMBIENT TEMPERATURE. ( C) NUMBER OF CYCLES AT 60Hz FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER BRIDGE ELEMENT 100 FIG.4- TYPICAL REVERSE CHARACTERISTICS PER BRIDGE ELEMENT 100 INSTANTANEOUS REVERSE CURRENT. ( A) INSTANTANEOUS FORWARD CURRENT. (A) 40 20 10 4 2 1 0 Tj=25 C PULSE WIDTH-300 S 0.4 TJ=125 0C 10 1 0.2 0.1 TJ=25 0C 0.6 0.7 0.8 0.9 1.0 1.1 1.2 0.1 1.3 INSTANTANEOUS FORWARD VOLTAGE. (V) 0 20 40 60 80 100 120 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) - 757 - 140