TRA06E Vishay Dale Thin Film, Resistor Array FEATURES • Flow solderable • Automatic placement capability • Inner electrode protection • Wrap around termination • Low noise, high frequency applications STANDARD ELECTRICAL SPECIFICATIONS MODEL POWER RATING P70°C W CIRCUIT 0.063 03 TRA06E LIMITING ELEMENT VOLTAGE MAX. V쓖 TEMPERATURE COEFFICIENT TOLERANCE RESISTANCE RANGE ppm/°C % Ω 25 0.1, 0.5, 1 100R - 33K 50 0.5, 1 10R - 91R 100 0.5, 1 36K - 330K 50 E-SERIES 24 • Power rating depends on the max. temperature at the solder point, the component placement density and the substrate material • TC temperature range: - 55°C to + 125°C • Packaging: according to EIA 481 TECHNICAL SPECIFICATIONS PARAMETER UNIT TRA06E SCHEMATIC 03 Rated Dissipation at 70°C W 0.063 Limiting Element Voltage 1) V쓖 50 ppm/°C ± 10 ± 50 to ± 100 °C - 55 / + 150 ppm/Volt < 0.1 TCR Tracking Absolute Category Temperature Range Voltage Coefficient 1) Rated voltage: PxR ORDERING INFORMATION TRA06E 08 03 101 F RT1 MODEL TERMINAL COUNT CIRCUIT TYPE R-VALUE Ω TOLERANCE ±% PACKAGING Papertape 5000pcs 08 03 First two digits (three for 1%) are significant. Last digit is the multiplier www.vishay.com 86 B = 0.1% D = ± 0.5% F = ± 1% For Technical Questions, contact: [email protected] Document Number 31054 Revision 05-Apr-04 TRA06E Vishay Dale Thin Film Resistor Array DIMENSIONS 8-Terminal device PIN E - Version DIMENSIONS [in millimeters] NO:# 8 L PIN CIRCUIT SCHEMATIC 03 Circuit B P T 0.8 ± 0.1 W 0.4 ± 0.1 1.6 ± 0.15 SOLDER PAD DIMENSIONS [in millimeters] NO:# c w d p a b 8 0.8 3.1 0.36 0.8 0.44 1.15 Rated Power % Pin 1 A 3.2 ± 0.3 0.5 ± 0.1 0.3 ± 0.2 120 100 80 60 40 20 0 - 55 -25 0 25 Derating 50 75 70 100 125 150 175 Ambient Temperature °C PERFORMANCE TEST CONDITIONS OF TEST Endurance Test at 70°C per EIA 575-3.14 1000 hours at 70°C, 1.5 hours "ON", 0.5 hours "OFF" ± 3.0% Overload per EIA 575-3.6 Short time overload ± 2.0% Thermal Shock per EIA 575-3.5 ± 1.0% Moisture Resistance per EIA 575-3.10 ± 1.0% Resistance to Soldering Heat EIA 575-3.8 10 seconds at 260°C solder bath temperature ± 2.0% High Temperature Exposure per EIA 575-3.7 ± 3.0% Low Temperature Operations per EIA-575-3.6 ± 1.0% Solderability & Leaching EIA 575-3.12 Document Number 31054 Revision 05-Apr-04 For Technical Questions, contact: [email protected] TEST RESULTS 95% Coverage www.vishay.com 87