Revised May 2002 MM74C08 Quad 2-Input AND Gate General Description Features The MM74C08 employs complementary MOS (CMOS) transistors to achieve wide power supply operating range, low power consumption and high noise margin, these gates provide basic functions used in the implementation of digital integrated circuit systems. The N- and P-channel enhancement mode transistors provide a symmetrical circuit with output swing essentially equal to the supply voltage. No DC power other than that caused by leakage current is consumed during static condition. All inputs are protected from damage due to static discharge by diode clamps to VCC and GND. ■ Wide supply voltage range: 3.0V to 15V ■ Guaranteed noise margin: 1.0V ■ High noise immunity: 0.45 VCC (typ.) ■ Low power TTL compatibility: Fan out of 2 driving 74L ■ Low power consumption: 10 nW/package (typ.) Ordering Code: Order Number Package Number Package Description MM74C08M M14A 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow MM74CD8N N14A 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Devices also available in Tape and Reel. Specify by appending suffix letter “X” to the ordering code. Connection Diagram Truth Table Inputs Outputs A B L L Y L L H L H L L H H H H = HIGH Level L = LOW Level Top View © 2002 Fairchild Semiconductor Corporation DS005878 www.fairchildsemi.com MM74C08 Quad 2-Input AND Gate October 1987 MM74C08 Absolute Maximum Ratings(Note 1) Voltage at Any Pin Lead Temperature −0.3V to VCC + 0.3V Operating Temperature Range −55°C to +125°C Storage Temperature Range −65°C to +150°C 700 mW Small Outline 500 mW Operating VCC Range 260°C (Soldering, 10 seconds) Note 1: “Absolute Maximum Ratings” are those values beyond which the safety of the device cannot be guaranteed. Except for “Operating Temperature Range” they are not meant to imply that the devices should be operated at these limits. The Electrical Characteristics table provides conditions for actual device operation. Power Dissipation (PD) Dual-In-Line 18V Absolute Maximum VCC 3.0V to 15V DC Electrical Characteristics Min/Max limits apply across the guaranteed temperature range, unless otherwise noted Symbol Parameter Conditions Min Typ Max Units CMOS TO CMOS VIN(1) VIN(0) VOUT(1) VOUT(0) Logical “1” Input Voltage Logical “0” Input Voltage Logical “1” Output Voltage Logical “0” Output Voltage VCC = 5.0V 3.5 VCC = 10V 8.0 V VCC = 5.0V 1.5 VCC = 10V 2.0 VCC = 5.0V, IO = −10 µA 4.5 VCC = 10V, IO = −10 µA 9.0 V VCC = 5.0V, IO = 10 µA 0.5 VCC = 10V, IO = 10 µA 1.0 IIN(1) Logical “1” Input Current VCC = 15V, VIN = 15V IIN(0) Logical “0” Input Current VCC = 15V, VIN = 0V ICC Supply Current VCC = 15V 0.005 −1.0 V 1.0 −0.005 0.01 V µA µA 15 µA 0.8 V CMOS/LPTTL INTERFACE VIN(1) Logical “1” Input Voltage 74C, VCC = 4.75V VIN(0) Logical “0” Input Voltage 74C, VCC = 4.75V VOUT(1) Logical “1” Output Voltage 74C, VCC = 4.75V, IO = −360 µA VOUT(0) Logical “0” Output Voltage 74C, VCC = 4.75V, IO = 360 µA VCC − 1.5 V 2.4 V 0.4 V OUTPUT DRIVE (see Family Characteristics Data Sheet) TA = 25°C (short circuit current) ISOURCE Output Source Current VCC = 5.0V, VOUT = 0V −1.75 −3.3 mA VCC = 10V, VOUT = 0V −8.0 15 mA VCC = 5.0V, VOUT = VCC 1.75 3.6 mA VCC = 10V, VOUT = V CC 8.0 16 mA (P-Channel) ISOURCE Output Source Current (P-Channel) ISINK Output Sink Current (N-Channel) ISINK Output Sink Current (N-Channel) www.fairchildsemi.com 2 (Note 2) (MM74C08) TA = 25°C, CL = 50 pF, unless otherwise specified Symbol Typ Max Propagation Delay Time to VCC = 5.0V 80 140 Logical “1” or “0” VCC = 10V 40 70 CIN Input Capacitance (Note 3) 5.0 pF CPD Power Dissipation Capacitance (Note 4) Per Gate 14 pF tpd0, tpd1 Parameter Conditions Min Units ns Note 2: AC Parameters are guaranteed by DC correlated testing. Note 3: Capacitance is guaranteed by periodic testing. Note 4: CPD determines the no load AC power consumption of any CMOS device. For complete explanation see Family Characteristics Application Note— AN-90. Typical Performance Characteristics Propagation Delay Time vs Load Capacitance MMM74C08 AC Test Circuit Note: Delays measured with input t r, tf = 20 ns Switching Time Waveforms 3 www.fairchildsemi.com MM74C08 AC Electrical Characteristics MM74C08 Physical Dimensions inches (millimeters) unless otherwise noted 14-Lead Small Outline Integrated Circuit (SOIC), JEDEC MS-012, 0.150" Narrow Package Number M14A www.fairchildsemi.com 4 MM74C08 Quad 2-Input AND Gate Physical Dimensions inches (millimeters) unless otherwise noted (Continued) 14-Lead Plastic Dual-In-Line Package (PDIP), JEDEC MS-001, 0.300" Wide Package Number N14A Fairchild does not assume any responsibility for use of any circuitry described, no circuit patent licenses are implied and Fairchild reserves the right at any time without notice to change said circuitry and specifications. LIFE SUPPORT POLICY FAIRCHILD’S PRODUCTS ARE NOT AUTHORIZED FOR USE AS CRITICAL COMPONENTS IN LIFE SUPPORT DEVICES OR SYSTEMS WITHOUT THE EXPRESS WRITTEN APPROVAL OF THE PRESIDENT OF FAIRCHILD SEMICONDUCTOR CORPORATION. As used herein: 2. A critical component in any component of a life support device or system whose failure to perform can be reasonably expected to cause the failure of the life support device or system, or to affect its safety or effectiveness. 1. Life support devices or systems are devices or systems which, (a) are intended for surgical implant into the body, or (b) support or sustain life, and (c) whose failure to perform when properly used in accordance with instructions for use provided in the labeling, can be reasonably expected to result in a significant injury to the user. www.fairchildsemi.com 5 www.fairchildsemi.com