SMD LED LAMP BL-LS0805XX Features: Ø Ø Ø Ø Ø Ø Ø 2.0mmx1.25mm SMD, 0.8mm THICKNESS Mono-color type Compatible with automatic placement equipment WIDE VIEWING ANGLE. IDEAL FOR BACKLIGHT AND INDICATOR. PACKAGE: 4KPCS/REEL RoHs Compliance n Electrical-optical characteristics: (Ta=25°C) (Test Condition: IF=20mA) Chip Part Number Emitted Color Lens Type λP (nm) Material Luminous Intensity (Iv) Unit:mcd Forward Voltage(VF) Unit:V Typ Max Min. Typ. BL-LS0805HC Red GaP 700 2.2 2.7 0.3 0.9 BL-LS0805SRC Super Red AlGaAs 660 1.85 2.30 5 13 BL-LS0805LRC Super Red AlGaAs 660 1.85 2.30 10 28 BL-LS0805EC Orange GaAsP 640 2.10 2.70 1 6 BL-LS0805YC Yellow GaAsP 583 2.15 2.70 1 6 BL-LS0805GC Green GaP 568 2.30 2.70 6 15 n Water Clear Viewi ng Angle 2?1/2 (deg) 130 Absolute maximum ratings (Ta=25°C) Parameter H Forward Current IF Power Dissipation Pd Reverse Voltage VR Peak Forward Current IPF (Duty 1/10 @1KHZ) Operation Temperature TOPR Storage Temperature TSTG Lead Soldering Temperature T SOL SR LR UR E Y G Unit mA 30 65 5 30 78 5 30 78 5 30 78 5 30 65 5 30 65 5 30 65 5 mW 100 100 100 100 100 100 100 mA V -30 to +80 -40 to +85 °C Max.260±5°C for 3 sec Max. (1.6mm from the base of the epoxy bulb) °C APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 1 of 5 WWW.BETLUX.COM EMAIL: [email protected] , [email protected] °C SMD LED LAMP BL-LS0805XX n Electrical-optical characteristics: (Ta=25°C) (Test Condition: IF=20mA) Chip Part Number Emitted Color λP (n m) Material Forward Voltage(VF) Unit:V Lens Type Luminous Intensity (Iv) Unit:mcd Max Min. Typ. Ultra Red AlGaAs 655 2.10 2.50 22 55 BL-LS0805UHR Ultra Red AlGaAs 645 2.10 2.60 30 80 BL-LS0805UEC Ultra Orange AlGaAs 630 2.10 2.50 30 70 BL-LS0805UHD Ultra Orange AlGaAs 618 2.10 2.60 50 110 BL-LS0805UYO Ultra Amber AlGaInP 610 2.10 2.60 30 70 BL-LS0805UYC Ultra Yellow AlGaInP 593 2.10 2.60 25 75 BL-LS0805UGC Ultra Green AlGaInP 575 2.20 2.70 10 45 BL-LS0805PGC Ultra Pure Green InGaN 525 3.50 4.20 50 100 BL-LS0805BGC Ultra Bluish Green InGaN 505 3.50 4.20 50 110 BL-LS0805DNB Blue InGaN 470 3.50 4.20 10 38 BL-LS0805UBC Ultra Blue InGaN 470 3.50 4.20 10 30 BL-LS0805UWC Ultra White InGaN / 3.50 4.20 40 200 n ng Typ BL-LS0805UDR Water Clear Viewi Angle 2?1/2 (deg) 130 Absolute maximum ratings (Ta=25°C) Parameter UDR Forward Current IF Power Dissipation Pd Reverse Voltage VR Peak Forward Current IPF (Duty 1/10 @1KHZ) Operation Temperature TOPR Storage Temperature TSTG Lead Soldering Temperature T SOL UHR UE UHD UYO UY UG PG BG DNB UB UW Unit mA 30 78 5 30 78 5 30 78 5 30 78 5 30 78 5 30 78 5 30 78 5 30 78 5 30 78 5 30 78 5 30 78 5 30 78 5 mW 100 100 100 100 100 100 100 100 100 100 100 100 mA V -30 to +80 -40 to +85 °C Max.260±5 °C for 3 sec Max. (1.6mm from the base of the epoxy bulb) °C APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 2 of 5 WWW.BETLUX.COM EMAIL: [email protected] , [email protected] °C SMD LED LAMP BL-LS0805XX n Package configuration & Internal circuit diagram Notes: 1. All dimensions are in millimeters (inches) 2. Tolerance is ±0.25(0.01")unless otherwise noted. 3. Specifications are subject to change without notice. APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 3 of 5 WWW.BETLUX.COM EMAIL: [email protected] , [email protected] SMD LED LAMP BL-LS0805XX n Tape Specifications Ｕｎｉｔ：ｍｍ Ｔｏｌｅｒａｎｃｅ：±０．１ ４．００±０．１０ ２．００±０．０５ １．７５±０．１０ Ｃａｔｈｏｄｅ ｍａｒｋ ３．５０±０．０５ １．４０±０．１０ ０．２３±０．０５ ５ ２．３０±０．１０ １．１０±０．１０ １．００±０．０１ １３．５±０．５ ４．００±０．１０ ８．００±０．２０ １．５０＋０．１０／－０ ＰＳ ６０＋０．５／－０ １７８±１．０ ９ ９．０±０．５ Ｌａｂｅｌ ｓｔｉｃｋｉｎｇ ｐｏｓｉｔｉｏｎ １２．０±０．１５ APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 4 of 5 WWW.BETLUX.COM EMAIL: [email protected] , [email protected] SMD LED LAMP BL-LS0805XX n Typical electrical-optical characteristics curves: (A) 1.0 (B) (C) (D) (2) (3) (8) (4) (1) (6) (5) (9) (10) 0.5 0 350 400 450 500 550 600 650 700 750 800 850 900 950 1000 Wavelength(nm) RELATIVE INTENSITY Vs WAVELENGTH(λ p ) (1) - GaAsP/GaAs 655nm/Red (9) - GaAlAs 880nm (2) - GaP 570nm/Yellow Green (3) - GaAsP/GaP 585nm/Yellow (10) - GaAs/GaAs & GaAlAs/GaAs 940nm (A) - GaN/SiC 430nm/Blue (4) - GaAsp/GaP 635nm/Orange & Hi-Eff Red (5) - GaP 700nm/Bright Red (B) - InGaN/SiC 470nm/Blue (C) - InGaN/SiC 505nm/Ultra Green (6) - GaAlAs/GaAs 660nm/Super Red (D) - InGaAl/SiC 525nm/Ultra Green (8) - GaAsP/GaP 610nm/Super Red 8 64 5 2 3 40 30 20 10 0 1.2 1.6 2.0 2.4 2.6 3.0 4.0 3.0 2.0 1.0 0 20 60 80 40 30 20 1 6 2,4,8,A 3 5 10 0 100 20 0.2 4 3 2 -20 -10 0 10 20 30 40 50 60 80 100 4 3 2 70 1 AMBIENT TEMPERATURE Ta(℃ ) 60 30KHz 3KHz 300Hz 100KHz 10KHz 1KHz 100Hz 10 9 8 7 6 5 Ipeak M AX. IDC MAX. 0.5 40 AMBIENT TEMPERATURE Ta(℃) FORWARD CURRENT VS. AMBIENT TEMPERATURE 3KHz 300KHz 1KHz 100KHz F-REFRESH RATE 10 10KHz 9 8 7 6 5 1 5 4 2 3 0.1 -30 40 FORWARD CURRENT (mA) RELATIVE LUMINOUS INTENSITY VS. FORWARD CURRENT Ipeak MAX. IDC MAX. REL ATIVE LUMIN OU S IN TENSITY 1 5 B FORWARD VOLTAGE (Vf) FORWARD CURRENT VS. FORWARD VOLTAGE 3 2 50 1 FORWARD CURRENT(mA) FORWARD CURRENT(mA) RELATIVE LUMINOUS INTENSITY 1 50 1 10 100 1000 tp-PULSE DURATION uS (1,2,3,4,6,8,B.D.J.K) 10,000 1 1 10 100 1000 tp-PULSE DURATION uS (5) NOTE:25℃ free air temperature unless otherwise specified APPROVED : XU L CHECKED :ZHANG WH DRAWN: LI FS REV NO: V.2 Page 5 of 5 WWW.BETLUX.COM EMAIL: [email protected] , [email protected] 10,000