KSC4D Series Sealed Detect Switch for SMT Features/Benefits • 6mm Detect • Soft actuator • J or G terminations • Tape & reel • IP 67 • RoHS compliant and compatible Typical Applications • Automotive • Cellular phones • Industrial electronics • Computer infrastructure and IT Specification FUNCTION: momentary action CONTACT ARRANGEMENT: 1 make contact = SPST, N.O. TERMINALS: J bend & Gullwing type for SMT Electrical Mechanical OPERATING TEMPERATURE: STORAGE TEMPERATURE: Type Operating force FA1 Newtons (grams) Operating life (operations) Travel 2,0 (200) 500,000 0,60 ± 0,4 KSC4D1G Silver -40˚C to 85˚C -55˚C to 85˚C Process SOLDERING: - Cleaning according to typical washing processes. - Infrared Reflow according to free soldering process. Packaging 1 Reels of 1,000 pieces. Dimensions of reels according to EIA RS481 or IEC 2863. External diameter 330 mm ± 2 mm. Tolerances of operating force FA is ± 1N. Electrical Silver MAXIMUM POWER: 1 VA MAXIMUM VOLTAGE: 32 VDC MINIMUM VOLTAGE: 20 mV MAXIMUM CURRENT: 50 mA MINIMUM CURRENT: 1 mA DIELECTRIC STRENGTH (50 Hz, 1 min.): 250 V CONTACT RESISTANCE: < 100 mΩ INSULATION RESISTANCE (100 V): > 109 Ω BOUNCE TIME: < 1 ms NOTE: Part numbers listed above do not represent all possible configurations. For information on specific and custom switches, consult Customer Service Center. How To Order Our easy build-a-switch concept allows you to mix and match options to create the switch you need. To order, select desired option from each category and place it in the appropriate box. However, please note that all the combinations of these options are not feasible. For any part number different from those listed above, please consult your local representative. Detect E K S C 4 D S H L F S Actuator 4 Soft, H=5,2 mm Operating Force D Detect 2.0N (200 grams) RoHS compliant and compatible. Silver plated. Termination J J bend G Gull wing Contact Material 1 Silver Rubber Hardness Indication 50 Shore Dimensions are shown: mm Specifications and dimensions subject to change E–26 www.ck-components.com KSC4D Series Sealed Detect Switch for SMT PAD LAYOUT 1,0 4,0 ø2,6 SOFT, 5,2 mm high 5,2 KSC4D1J 3,0 max. 0 1 8,6 min. SOFT, 5,2 mm high 6,2 0.3 0 0,7±0,05 10±0,3 4±0,1 KSC4D1G 6,2 0.3 0 Ø2,7±0,1 0,1 0.2 0 1 4 5,2±0,2 2,5±0,15 LAYOUT PAD 5,8 MAXI (5 0’) 12 MINI (15 0’) 7,5 0.3 0 2±0,05 (.079±.002) ø1,5+0,1/-0,0 (.059+.004/-.000) 5,6 (.220) 2±0,05 (.079±.002) 4±0,1 (.157±.004) 16±0,3 (.630±.012) 7,3±0,1 (.287±.004) 2˚0' 7,5 (.295) 1,0 (.039) B 1,75 (.069) 12±0,1 (.472±.004) FOR KSC4 FOR J TERMINATION R 1,1 (.045) 5 0,15±0,02 (.006±.001) B 6,7±0,1 (.264±.004) 0,4±0,03 (.016±.001) 2,05 (.081) FOR KSC4 FOR G TERMINATION ø1,5+0,2/-0,0 (.059+.008/-.000) E 12±0,1 (.472±.004) 16±0,3 (.630±.012) 1,0 (.039) 7,5 (.295) 1,75 (.069) 4±0,1 (.157±.004) B 10,50,1 (.413.004) 2˚0' 2±0,05 (.079±.002) Detect 2±0,05 (.079±.002) ø1,5+0,1/-0,0 (.059+.004/-.000) 5,6 (.220) R 1,1 (.045) 5 0,4±0,03 (.016±.001) 0,15±0,02 (.006±.001) B 6,7±0,1 (.264±.004) 2,05 (.081) ø1,5+0,2/-0,0 (.059+.008/-.000) Dimensions are shown: mm Specifications and dimensions subject to change E–27 www.ck-components.com