P Series Low Profile Key Switches Features/Benefits • Low profile design • Multi-pole and multi-position • Panel and PCB mounting • Variety of termination styles • RoHS Compliant Typical Applications • CATV • Low cost security devices • Lawn equipment Models Available Specifications Materials CONTACT RATING: Q contact material: 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA). See page L-46 for additional ratings. ELECTRICAL LIFE: 10,000 make-and-break cycles at full load. CONTACT RESISTANCE: Below 10 mΩ typ. initial @ 2-4 V DC, 100 mA, for both silver and gold plated contacts. INSULATION RESISTANCE: 109 Ω min. DIELECTRIC STRENGTH: 1,000 Vrms min. @ sea level. INDEXING: 45º or 90º, 2-3 positions. Other functions available, consult Customer Service Center. OPERATING & STORAGE TEMPERATURE: -30ºC to 65ºC HOUSING: One piece, 6/6 nylon (UL94V-2), black. Finish, matte. KEY: One nickel plated brass key. CONTACTS AND TERMINALS: Q contact material: Copper, silver plated. See page K-46 for additional contact materials. CONTACT SPRING: Music wire or stainless steel. TERMINAL SEAL: Epoxy. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. NOTE: Specifications and materials listed above are for switches with standard options. For information on specific and custom switchlocks, consult Customer Service Center. Build-A-Switch To order, simply select desired option from each category and place in the appropriate box. Available options are shown and described on pages K-41 thru K-42. For additional options not shown in catalog, consult Customer Service Center. Rotary K Switch Function P10113 SP, 90° Index, Keypull pos. 1 P20013 DP, 45° Index, Keypull pos. 1 P20113 DP, 90° Index, Keypull pos. 1 P1011U SP, 90° Index, keypull pos. 1 & 2 P2011U DP, 90° Index, keypull pos. 1 & 2 Keying 3 One nickel plated brass key 2 Two nickel plated brass keys Type W Low profile key switch Finish M Matte finish Terminations 03 Solder lug with hole 02 PC Thru-hole WC Wire lead Mounting Style N With nut Contact Material Q Silver B Gold G Gold over silver Seal NONE No seal E Epoxy seal Color 2 Black Dimensions are shown: Inch (mm) Specifications and dimensions subject to change K–40 www.ck-components.com P Series Low Profile Key Switches SWITCH FUNCTION CONNECTED TERMINALS (see terminal location below.) NO. POLES MODEL NO. POS.1 POS. 2 DP P20013 8-1,4-5 1-2,5-6 SP DP P10113 P20113 8-1 1-3 8-1,4-5 1-3,5-7 SP P1011U P2011U 8-1 1-3 8-1,4-5 1-3,5-7 DP KEY PULL POSITIONS POS. 3 SWITCH CONFIGURATION INDEXING Position 1 2-3, 6-7 45˚ Position 1 90º Position 1 & 2 TERMINAL NUMBERS LEGEND = Detent Positions (45º or 90º ). = Key pull possible in these positions. Terminal numbers molded on bottom of housing. = Stop positions. All models with all options when ordered with ‘G’ or ‘Q’ contact material. K Rotary TERM. NOS MOLDED ON HOUSING KEYING 3 ONE NICKEL PLATED BRASS KEY 2 TWO NICKEL PLATED BRASS KEYS NOTE: All models provided with the same key code. For replacement keys or special features, consult Customer Service Center. LOCK COLOR TYPE LOCK TYPE W LOW PROFILE KEY SWITCH OPTION CODE 2 COLOR BLACK NOTE: Standard housing color is black. Special colors or mixed housing and key plug colors available, consult Customer Service Center. Third Angle Projection Dimensions are shown: mm Specifications and dimensions subject to change K–41 www.ck-components.com P Series Low Profile Key Switches FINISH M MATTE FINISH TERMINATIONS 03 SOLDER LUG WITH HOLE 02 .224 (5,89) .210 (5,33) .085 (2,16) .046 (1,17) .080 (2,03) WC WIRE LEAD 450 TYP. .062 (1,57) 22 AWG INSULATED WIRE .080 (2,03) .050 (1,27) .020 THK, (0,51) PC MOUNTING PC THRU-HOLE .420 DIA (10,67 ) .062 DIA. (1,57 ) TYP. .020 THK, (0,51) 6.00 (15,24) .50 (12,7) Black wire standard, other colors, gages, and lengths available, consult Customer Service Center. UL style 1015. MOUNTING STYLE N PANEL MOUNTING WITH NUT 3/4-24 UNS .760 DIA. (19,30 ) .875 (22,23) .640 (16,26) 1.010 (25,65) .125 thk. (3,18) Rotary K MOUNTING STYLE PANEL THICKNESS N (with nut) .215 (5,46) max. Nut part number: 175050700 CONTACT MATERIAL OPTION CODE CONTACT AND TERMINAL MATERIAL Q SILVER 2 B GOLD G 1 GOLD OVER SILVER 3 RATING 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 AC V AC (UL/CSA). POWER LOW LEVEL/DRY CIRCUIT 0.4 VA MAX. @ 20 V AC or DC MAX LOW LEVEL/DRY CIRCUIT OR POWER 0.4 VA MAX. @ 20 V AC or DC MAX. or 4 AMPS @ 125 V AC or 28 V DC; 2 AMPS @ 250 V AC (UL/CSA) * Note: See Technical Data section of this catalog for RoHS compliant and compatible definition and specifications. 1 CONTACTS & 2 CONTACTS & TERMINALS: Copper, with gold plate over nickel plate. TERMINALS: Copper, silver plated (Standard with all termination options). 3 CONTACTS & TERMINALS: Copper, with gold plate over silver plate. NOTE: Any models supplied with Q, B or G contact material are RoHS compliant. All models with all options when ordered with ‘G’ or ‘Q’ contact material. NOTE: ‘G’ contact material is equivalent to both ‘B’ and ‘Q” contact materials. SEAL NONE E NO SEAL EPOXY SEAL EPOXY .075 MAX. (1,91) Third Angle Projection Dimensions are shown: Inch (mm) Specifications and dimensions subject to change K–42 www.ck-components.com