EC32 Series EC32 • RoHS Compliant (Pb-free) • Voltage Controlled Crystal Oscillator (VCXO) • 3.3V Supply Voltage • HCMOS/TTL output • 14 pin DIP package • Stability to ±20ppm • Wide frequency and pull range H 5.08 L 20.8 W 13.2 OSCILLATOR NOTES __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range (MHz) 1.000MHz to 44.736MHz Operating Temperature Range 0°C to 70°C or -40°C to +85°C Storage Temperature Range -55°C to +125°C Supply Voltage (VDD) 3.3VDC ±10% Aging (at 25°C) ±5ppm / year Maximum Load Drive Capability 2TTL Load or 15pF HCMOS Load Maximum 10 mSeconds Maximum Start Up Time Frequency Deviation / 1.65VDC ±1.65VDC Positive Transfer Characteristic, or Control Voltage 1.65VDC ±1.65VDC Positive Transfer Characteristic ±50ppm Minimum ±100ppm Minimum ±20% Maximum, ±15% Maximum, or 10% Maximum Linearity 1.000MHz to 20.000MHz 10mA Maximum 20.001MHz to 44.736MHz 20mA Maximum Inclusive of Operating Temperature ±100ppm, ±50ppm, ±25ppm, or Range, Supply Voltage, and Load ±20ppm Maximum (0°C to 70°C Only) w/TTL Load 2.4VDC Minimum w/HCMOS Load 2.7VDC Minimum Output Voltage Logic Low (VOL) w/TTL Load or w/HCMOS Load 0.4VDC Maximum Duty Cycle at 50% of Waveform 50 ±10(%) (Standard) at 50% of Waveform 50 ±5(%) (Optional) 0.4VDC to 2.4VDC w/TTL Load; 5 nSeconds Maximum Input Current Frequency Tolerance / Stability Output Voltage Logic High (VOH) Rise Time / Fall Time 20% to 80% of Waveform w/HCMOS Load Period Jitter: Absolute Period Jitter: One Sigma ±100pSeconds Maximum ±25pSeconds Maximum MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC32 14 pin DIP 3.3V OS46 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EC32 00 T A 15 ET - 24.000M - G FREQUENCY TOLERANCE / STABILITY 00=±100ppm Maximum (Standard) 45=±50ppm Maximum, 25=±25ppm Maximum 20=±20ppm Maximum AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 133) G=Full Size Gull Wing (See Page 132) DUTY CYCLE Blank=50 ±10(%) (Standard), T=50 ±5(%) FREQUENCY OPERATING TEMP. RANGE Blank=0°C to 70°C (Standard) ET=-40°C to 85°C FREQUENCY DEVIATION Blank=±50ppm Minimum (Standard) A=±100ppm Minimum LINEARITY Blank=20% Maximum(Standard) 15=15% Maximum 10=10% Maximum NOTES __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ MECHANICAL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS MARKING SPECIFICATIONS Pin 1: Control Voltage (Vc) Pin 7: Case Ground Pin 8: Output Pin 14: Supply Voltage Line 1: ECLIPTEK Line 2: EC32 ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Series Designator Characteristic Specification Seal Integrity Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds minimum. Solderability Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage. Marking Permanency 10 Strokes with brush after 1 minute soak in solvent, 3 times. Shock Random drop on hard wooden plate 3 times from a height of 20cm. Vibration Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz within 1 minute (approximately) for 2 hours minimum on each axis (X, Y and Z) for a total of 6 hours. Line 3: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 4: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier Note: Pin 1 shall be designated with a dot MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS ECLIPTEK CORP. OSCILLATOR EC32 14 pin DIP 3.3V OS46 800-ECLIPTEK www.ecliptek.com for latest revision REV.DATE 08/06 Specifications subject to change without notice. EC32 Series • RoHS Compliant (Pb-free) • Voltage Controlled Crystal Oscillator (VCXO) • 3.3V Supply Voltage • HCMOS/TTL output • 8 pin DIP package • Stability to ±20ppm • Wide frequency and pull range EC32 H 5.6 L 13.2 W 13.2 OSCILLATOR NOTES __________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ _________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________________ ELECTRICAL SPECIFICATIONS Frequency Range (MHz) 1.000MHz to 44.736MHz Operating Temperature Range 0°C to 70°C or -40°C to +85°C Storage Temperature Range -55°C to +125°C Supply Voltage (VDD) 3.3VDC ±10% Aging (at 25°C) ±5ppm / year Maximum Load Drive Capability 2TTL Load or 15pF HCMOS Load Maximum 10 mSeconds Maximum Start Up Time Frequency Deviation / 1.65VDC ±1.65VDC Positive Transfer Characteristic, or ±50ppm Minimum Control Voltage 1.65VDC ±1.65VDC Positive Transfer Characteristic ±100ppm Minimum ±20% Maximum, ±15% Maximum, or 10% Maximum Linearity Input Current Frequency Tolerance / Stability 1.000MHz to 20.000MHz 10mA Maximum 20.001MHz to 44.736MHz 20mA Maximum Inclusive of Operating Temperature ±100ppm, ±50ppm, ±25ppm, or Range, Supply Voltage, and Load ±20ppm Maximum (0°C to 70°C Only) 2.4VDC Minimum Output Voltage Logic High (VOH) w/TTL Load w/HCMOS Load 2.7VDC Minimum Output Voltage Logic Low (VOL) w/TTL Load or w/HCMOS Load 0.4VDC Maximum Duty Cycle at 50% of Waveform 50 ±10(%) (Standard) at 50% of Waveform 50 ±5(%) (Optional) 0.4VDC to 2.4VDC w/TTL Load; 5 nSeconds Maximum Rise Time / Fall Time 20% to 80% of Waveform w/HCMOS Load Period Jitter: Absolute ±100pSeconds Maximum Period Jitter: One Sigma ±25pSeconds Maximum MANUFACTURER CATEGORY SERIES PACKAGE VOLTAGE CLASS REV.DATE ECLIPTEK CORP. OSCILLATOR EC32 8 pin DIP 3.3V OS47 08/06 800-ECLIPTEK www.ecliptek.com for latest revision Specifications subject to change without notice. PART NUMBERING GUIDE EC32 00 HS T A 15 ET - 24.000M - G TR FREQUENCY TOLERANCE / STABILITY 00=±100ppm Maximum (Standard) 45=±50ppm Maximum, 25=±25ppm Maximum 20=±20ppm Maximum PACKAGING OPTIONS Blank=Bulk (Standard) TR=Tape & Reel (only offered with Half Size G and Half Size G2 Options) PACKAGE HS=Half Size 8 Pin DIP AVAILABLE OPTIONS Blank=None (Standard) CLXXX=Custom Lead Length (See Page 133) G=Half Size Gull Wing (See Page 132) G2=Alternate Half Size Gull Wing (See Page 132) DUTY CYCLE Blank=50 ±10(%) (Standard), T=50 ±5(%) FREQUENCY DEVIATION Blank=±50ppm Minimum (Standard) A=±100ppm Minimum FREQUENCY OPERATING TEMP. RANGE Blank=0°C to 70°C (Standard) ET=-40°C to 85°C LINEARITY Blank=20% Maximum(Standard) 15=15% Maximum, 10=10% Maximum MECHANICAL DIMENSIONS TAPE AND REEL DIMENSIONS ALL DIMENSIONS IN MILLIMETERS ALL DIMENSIONS IN MILLIMETERS Pin 1 Locator for Gull Wing (1) For “G” Option (2) For “G2” Option Pin 1: Control Voltage (Vc) Pin 4: Case Ground Pin 5: Output Pin 8: Supply Voltage MARKING SPECIFICATIONS Line 1: ECLIPTEK Line 2: EC32 Series Designator 250 Pieces Per Reel Compliant to EIA-481A ENVIRONMENTAL/MECHANICAL SPECIFICATIONS Line 3: XX.XXX M Frequency in MHz (5 Digits Maximum + Decimal) Line 4: XX Y ZZ Week of Year Last Digit of Year Ecliptek Manufacturing Identifier MANUFACTURER subject to CATEGORY SERIES Specifications change without notice. ECLIPTEK CORP. OSCILLATOR EC32 Characteristic Specification Seal Integrity Bubble test in Perfluorocarbon at +125°C ±5°C for 60 seconds minimum. Solderability Sn63 Solder dip at +230°C ±5°C for 5 seconds/95% coverage. Marking Permanency 10 Strokes with brush after 1 minute soak in solvent, 3 times. Shock Random drop on hard wooden plate 3 times from a height of 20cm. Vibration Frequency with an amplitude of 1.5mm sweeping between 10Hz to 55Hz within 1 minute (approximately) for 2 hours minimum on each axis (X, Y and Z) for a total of 6 hours. ## 800-ECLIPTEK www.ecliptek.com for latest revision PACKAGE VOLTAGE 8 pin DIP 3.3V CLASS 1-800-ECLIPTEK OS47 REV.DATE WWW.ECLIPTEK.COM 08/06 Specifications subject to change without notice.