Certificate : TH97/10561QM GNTA - GNTM GLASS PASSIVATED JUNCTION SILICON SURFACE MOUNT SMB (DO-214AA) FEATURES : Glass passivated junction chip High current capability High reliability Low leakage Low forward voltage drop Pb / RoHS Free 1.1 ± 0.3 4.8 ± 0.15 5.4 ± 0.15 PRV : 50 - 1000 Volts Io : 2.5 Amperes * * * * * * Certificate : TW00/17276EM 0.22 ± 0.07 2.0 ± 0.1 2.3 ± 0.2 3.6 ± 0.15 MECHANICAL DATA : Dimensions in millimeters * Case : SMB Molded plastic * Epoxy : UL94V-O rate flame retardant * Lead : Lead Formed for Surface Mount * Polarity : Color band denotes cathode end * Mounting position : Any * Weight : 0.1079 gram MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Rating at 25 °C ambient temperature unless otherwise specified. RATING SYMBOL GNTA GNTB GNTD GNTG GNTJ GNTK GNTM UNIT Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 V Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 V Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 V Maximum Average Forward Current Ta = 75 °C IF(AV) 2.5 A IFSM 150 A Maximum Instantaneous Forward Voltage at I F = 2.5 A. VF 1.1 V Maximum DC Reverse Current Ta = 25 °C IR 5.0 μA at rated DC Blocking Voltage Ta = 100 °C IR(H) 50 μA Typical Junction Capacitance (Note1) CJ 35 pF Operating Junction Temperature Range TJ - 65 to + 150 °C TSTG - 65 to + 150 °C Peak Forward Surge Current 8.3ms Single half sine wave Superimposed on rated load (JEDEC Method) Storage Temperature Range Note : (1) Measured at 1.0 MHz and applied reverse voltage of 4.0 V. Page 1 of 2 Rev. 00 : May 4, 2007 Certificate : TH97/10561QM Certificate : TW00/17276EM RATING AND CHARACTERISTIC CURVES ( GNTA - GNTM ) FIG.2 - MAXIMUM NON-REPETITIVE PEAK FORWARD SURGE CURRENT 150 2.5 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG.1 - DERATING CURVE FOR OUTPUT RECTIFIED CURRENT 2.0 1.5 1.0 0.5 8.3 ms Single Half Sine-Wave 120 90 60 30 RESISTIVE OR INDUCTIVE LOAD 0 0 0 25 50 75 100 125 150 175 1 AMBIENT TEMPERATURE, ( °C) 2 4 6 10 20 40 60 100 NUMBER OF CYCLES AT 60Hz FIG.3 - TYPICAL FORWARD CHARACTERISTICS FIG.4 - TYPICAL REVERSE CHARACTERISTICS INSTANTANEOUS REVERSE CURRENT, (μA) INSTANTANEOUS FORWARD CURRENT, (A) 20 10 1.0 0.1 TJ = 25 °C Pulse Width = 300 μs 1% Duty Cycle 0.01 0.4 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 1.3 1.4 INSTANTANEOUS FORWARD VOLTAGE, (V) Page 2 of 2 10 TJ = 100 °C 1.0 0.1 TJ = 25 °C 0.01 0 20 40 60 80 100 120 140 PERCENT OF RATED REVERSE VOLTAGE, (%) Rev. 00 : May 4, 2007