EPCOS B9451

SAW Components
SAW Rx Filter
WCDMA Band I / Band IV / Band X
Series/Type:
Ordering code:
B9451
B39212B9451P810
Date:
Version:
April 07, 2010
2.0
 EPCOS AG 2010. Reproduction, publication and dissemination of this data sheet, enclosures
hereto and the information contained therein without EPCOS’ prior express consent is prohibited.
SAW Components
B9451
SAW Filter
2140.0 MHz
Data sheet
Application
■ Low-loss RF filter for mobile telephone
WCDMA systems, receive path (RX)
■ Useable for antenna diversity systems
for WCDMA band I, IV, X
Impedance 50 Ω
Unbalanced to unbalanced operation
Very low insertion attenuation
Very low amplitude ripple
Very low Error Vector Magnitude (EVM)
Very high Tx suppression for WCDMA
band I, II, IV, V, X
■ Usable passband 60 MHz
0,325
Features
Package size 1.4 x 1.1 x 0.4 mm3
Approx. weight 0.003 g
RoHS compatible
Package for Surface Mount Technology
(SMT)
■ Ni, gold-plated terminals
■ Electrostatic Sensitive Device (ESD)
■ Moisture Sensitive Level 3
0,25
2
3
bottom view
5
0,5 0,5
4
0,4 +/−0,05
1
■
■
■
■
0,575
■
■
■
■
■
■
side view
1,1
1,4
top view
Pin configuration
■ 1
■ 4
■ 2,3,5
Input, unbalanced
Output, unbalanced
To be grounded
Please read cautions and warnings and
important notes at the end of this document.
2
1
4
2,5
3
April 07, 2010
SAW Components
B9451
SAW Filter
2140.0 MHz
Data sheet
Characteristics
Operating temperature range:
Terminating source impedance:
Terminating load impedance:
T = –30 ˚C to +85 ˚C
ZS =
50 Ω +2.7nH (unbalanced)
ZL =
50 Ω +1.9nH (unbalanced)
min.
Center frequency
fC
Maximum insertion attenuation
2110.0 ... 2155.0MHz αmax
2110.0 ... 2170.0MHz αmax
... 2167.6MHz αWCDMA1)
Amplitude ripple (p-p)
∆α
2110.0 ... 2155.0MHz
@fCarrier 2112.4
2110.0
... 2170.0MHz
Error Vector Magnitude
@fCarrier 2112.4 ... 2167.6MHz EVM2)
Input VSWR
2110.0 ... 2155.0MHz
max.
—
typ.
@ 25 ˚C
2140.0
—
MHz
—
1.9
2.7
dB
—
1.9
2.7
dB
—
2.1
2.7
dB
—
0.5
1.2
dB
—
0.5
1.2
dB
—
1.1
1.9
%
—
1.6
2.0
2110.0
... 2170.0MHz
—
1.6
2.0
Output VSWR
2110.0
... 2155.0MHz
—
1.6
2.0
2110.0
... 2170.0MHz
—
1.6
2.0
0.0
810.0
849.0
898.0
925.0
1710.0
1770.0
1850.0
2400.0
2484.0
4220.0
4340.0
...
...
...
...
...
...
...
...
...
...
...
...
35
46
35
46
35
50
35
44
30
10
15
10
50
50
49
49
48
54
57
48
50
36
36
34
—
—
—
—
—
—
—
—
—
—
—
—
α
Attenuation
1)
2)
810.0MHz
849.0MHz
898.0MHz
925.0MHz
1710.0MHz
1770.0MHz
1850.0MHz
1980.0MHz
2484.0MHz
4220.0MHz
4340.0MHz
6000.0MHz
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
dB
Attenuation of WCDMA signal (“Powertransferfunction”). Please refer to annotation below.
Error Vector Magnitude (EVM) based on definition given in 3GPP TS 25.141.
Please read cautions and warnings and
important notes at the end of this document.
3
April 07, 2010
SAW Components
B9451
SAW Filter
2140.0 MHz
Data sheet
Annotation for characteristics section
Attenuation of WCDMA signal (“Powertransferfunction”, αWCDMA) is determined by
∞
∫∞ Sds 21 ( f )HRRC ( f – f Carrier )
2
df
fCarrier according to 3GPP TS 25.101 (e.g. for UMTS-Passband, fCarrier ranges from 2112.4 MHz
(lowest Rx channel) to 2167.6 MHz (highest Rx channel)). HRRC(f) is the transfer function of the
root-raised cosine transmit pulse shaping filter according to 3GPP TS 25.101 with the following
normalization:
∞
∫∞ HRRC ( f )
2
df = 1
Maximum ratings
Operable temperature range T
–30/+85
˚C
Storage temperature range
Tstg
–40/+85
˚C
DC voltage
VDC
5
V
ESD voltage
VESD
1001)
V
machine model, 1 pulse
Source Power
PS
dBm
cw signal @ 50˚C
1)
15
acc. to JESD22-A115A (machine model), 1 negative & 1 positive pulse.
Please read cautions and warnings and
important notes at the end of this document.
4
April 07, 2010
SAW Components
B9451
SAW Filter
2140.0 MHz
Data sheet
Transfer function
Transfer function (wideband)
Please read cautions and warnings and
important notes at the end of this document.
5
April 07, 2010
SAW Components
B9451
SAW Filter
2140.0 MHz
Data sheet
Smith chart
S11 function
S22 function
Please read cautions and warnings and
important notes at the end of this document.
6
April 07, 2010
SAW Components
B9451
SAW Filter
2140.0 MHz
Data sheet
References
Type
B9451
Ordering code
B39212B9451P810
Marking and Package
C61157-A8-A14
Packaging
F61074-V8237-Z000
Date Codes
L_1126
S-Parameters
B9451_NB.s2p
B9451_WB.s2p
see file header for port/pin assignment table
Soldering profile
S_6001
RoHS compatible
defined as compatible with the following documents:
"DIRECTIVE 2002/95/EC OF THE EUROPEAN PARLIAMENT
AND OF THE COUNCIL of 27 January 2003 on the restriction
of the use of certain hazardous substances in electrical and
electronic equipment. 2005/618/EC from April 18th, 2005,
amending Directive 2002/95/EC of the European Parliament
and of the Council for the purposes of establishing the maximum concentration values for certain hazardous substances in
electrical and electronic equipment."
Moldability
Before using in overmolding environment, please contact your
EPCOS sales office.
For further information please contact your local EPCOS sales office or visit our webpage at
www.epcos.com .
Published by EPCOS AG
Surface Acoustic Wave Components Division
P.O. Box 80 17 09, 81617 Munich, GERMANY
 EPCOS AG 2010. This brochure replaces the previous edition.
For questions on technology, prices and delivery please contact the Sales Offices of EPCOS AG or
the international Representatives.
Due to technical requirements components may contain dangerous substances. For information on
the type in question please also contact one of our Sales Offices.
Please read cautions and warnings and
important notes at the end of this document.
7
April 07, 2010
Important notes
The following applies to all products named in this publication:
1.
2.
3.
4.
5.
6.
7.
Some parts of this publication contain statements about the suitability of our products for
certain areas of application. These statements are based on our knowledge of typical
requirements that are often placed on our products in the areas of application concerned. We
nevertheless expressly point out that such statements cannot be regarded as binding
statements about the suitability of our products for a particular customer application.
As a rule, EPCOS is either unfamiliar with individual customer applications or less familiar
with them than the customers themselves. For these reasons, it is always ultimately
incumbent on the customer to check and decide whether an EPCOS product with the
properties described in the product specification is suitable for use in a particular customer
application.
We also point out that in individual cases, a malfunction of electronic components or
failure before the end of their usual service life cannot be completely ruled out in the
current state of the art, even if they are operated as specified. In customer applications
requiring a very high level of operational safety and especially in customer applications in
which the malfunction or failure of an electronic component could endanger human life or
health (e.g. in accident prevention or life-saving systems), it must therefore be ensured by
means of suitable design of the customer application or other action taken by the customer
(e.g. installation of protective circuitry or redundancy) that no injury or damage is sustained
by third parties in the event of malfunction or failure of an electronic component.
The warnings, cautions and product-specific notes must be observed.
In order to satisfy certain technical requirements, some of the products described in this
publication may contain substances subject to restrictions in certain jurisdictions (e.g.
because they are classed as hazardous). Useful information on this will be found in our
Material Data Sheets on the Internet (www.epcos.com/material). Should you have any more
detailed questions, please contact our sales offices.
We constantly strive to improve our products. Consequently, the products described in this
publication may change from time to time. The same is true of the corresponding product
specifications. Please check therefore to what extent product descriptions and specifications
contained in this publication are still applicable before or when you place an order.
We also reserve the right to discontinue production and delivery of products. Consequently, we cannot guarantee that all products named in this publication will always be
available. The aforementioned does not apply in the case of individual agreements deviating
from the foregoing for customer-specific products.
Unless otherwise agreed in individual contracts, all orders are subject to the current
version of the “General Terms of Delivery for Products and Services in the Electrical
Industry” published by the German Electrical and Electronics Industry Association
(ZVEI).
The trade names EPCOS, BAOKE, Alu-X, CeraDiode, CSMP, CSSP, CTVS, DeltaCap,
DigiSiMic, DSSP, MiniBlue, MiniCell, MKK, MLSC, MotorCap, PCC, PhaseCap, PhaseCube,
PhaseMod, PhiCap, SIFERRIT, SIFI, SIKOREL, SilverCap, SIMDAD, SiMic, SIMID,
SineFormer, SIOV, SIP5D, SIP5K, ThermoFuse, WindCap are trademarks registered or
pending in Europe and in other countries. Further information will be found on the Internet at
www.epcos.com/trademarks.
8
April 07, 2010