MIL-DTL 38999 Type 233-103-H9 Jam Nut Mount Hermetic Plug/Receptacle Bulkhead Feed-Thru for MIL-DTL-38999 Series III Type Shell Size 09 11 13 15 17 19 21 23 25 Connector Series 233 - D38999 Series III Type Connector Type 103 - Hermetic Bulkhead Feed-Thru 2.000 (50.8) Max Insert Arrangement Per MIL-DTL-38999 Series III MIL-STD-1560 .890 (22.6) Max .125 (3.2) Contact Termination P - Pin on Plug Side S - Socket on Plug Side B 233 - 103 - H9 P 11 - 35 P N - 01 Alternate Positions: A, B, C, D, E (N = Normal) Shell Style H9 - Jam Nut Mount Plug/ Receptacle Gender Changer Connector Material and Finish Z1 - CRES, Passivated ZL - CRES, Nickel Finish Panel Accomodation 01 - .0625″ (Min) .125″ (Max) 02 - .0625″ (Min) .250″ (Max) 03 - .0625″ (Min) .500″ (Max) .520/.500 (13.2/12.7) to rear of red full-mate indicator band F Thread Insert Arrangements per MIL-DTL-38999 Series III MIL-STD-1560 HERMETIC LEAK RATE MOD CODES Designator Panel Accomodation A Thread Required Leak Rate –585A 1 x 10-10 cc’s Helium per second –585B 1 x 10-9 cc’s Helium per second –585C 1 x 10-8 cc’s Helium per second C TABLE I: CONNECTOR DIMENSIONS SHELL SIZE A THREAD 0.1 P-0.3L-TS-2 B DIM C DIM MAX D DIA E DIM F THREAD x1-6g-0.100R 9 .6250 .945(24.0) 1.090(27.7) .698(17.7) .322(8.9) M17 11 .7500 1.063(27.0) 1.280(32.5) .822(20.9) .385(9.8) M20 13 .8750 1.260(32.0) 1.400(35.6) 1.010(27.6) .479(12.3) M25 15 1.0000 1.417(36.0) 1.530(38.9) 1.135(28.8) .541(13.7) M28 17 1.1875 1.457(37.0) 1.660(42.2) 1.260(32.0) .604(15.3) M32 19 1.2500 1.614(41.0) 1.840(46.7) 1.385(35.2) .635(16.1) M35 21 1.3750 1.811(46.0) 1.970(50.5) 1.510(38.4) .698(17.7) M38 23 1.5000 1.968(50.0) 2.090(53.1) 1.635(41.5) .760(19.3) M41 25 1.6250 2.017(51.2) 2.210(56.1) 1.760(44.7) .822(20.9) M44 B E D Dia Recommended Panel Cut-Out APPLICATION NOTES 1. Power to a given contact on one end will result in power to contact directly opposite, regardless of identification letter. 2. Hermeticity = less than 1 x 10-7 cc/sec at one atmosphere. Not for use in liquid atmosphere. 3. Material/finish: Shell, nut – CRES/passivated, carbon steel/fused tin or CRES/nickel per QQ-N-290. © 2009 Glenair, Inc. Contacts – Gold Plated. Pin: alloy 52; Skt.: copper alloy Insulator – fused vitreous glass/N.A. Seals – fluorosilicone rubber/N.A. 4. CAGE CODE 06324 Metric dimensions (mm) are indicated in parentheses. Printed in U.S.A. GLENAIR, INC. • 1211 AIR WAY • GLENDALE, CA 91201-2497 • 818-247-6000 • FAX 818-500-9912 www.glenair.com B-39 E-Mail: [email protected]