SBT2907AU PNP Silicon Transistor Descriptions PIN Connection • General purpose application • Switching application Features 3 • Low Leakage current • Low collector saturation voltage enabling low voltage operation • Complementary pair with SBT2222AU 1 2 SOT-323 Ordering Information Type NO. Marking Package Code SBT2907AU F2 □ ① ② SOT-323 ①Device Code ② Year&Week Code Absolute maximum ratings Ta=25°C Characteristic Symbol Ratings Unit Collector-Base voltage VCBO -60 V Collector-Emitter voltage VCEO -60 V Emitter-base voltage VEBO -5 V Collector current IC -600 mA Collector dissipation PC* 350 mW Tj 150 °C Tstg -55~150 °C Junction temperature Storage temperature range * : Package mounted on 99.5% alumina 10×8×0.6mm KSD-T5D021-001 1 SBT2907AU Electrical Characteristics Characteristic Ta=25°C Symbol Test Condition Min. Typ. Max. Unit Collector-Base breakdown voltage BVCBO IC=-10μA, IE=0 -60 - - V Collector-Emitter breakdown voltage BVCEO IC=-1mA, IB=0 -60 - - V Emitter-Base breakdown voltage BVEBO IE=-10μA, IC=0 -5 - - V Collector cut-off current ICBO VCB=-60V, IE=0 - - -20 nA DC current gain hFE VCE=-10V, IC=-10mA 100 - - - Collector-Emitter saturation voltage Transition frequency VCE(sat) IC=-150mA, IB=-15mA - - -0.4 V fT VCE=-5.0V, IC=-20mA, f=100MHz 200 - - MHz - - 8 pF - - 45 ns - - 10 ns Collector output capacitance Cob VCB=-10V, IE=0, f=1MHz Turn-on time ton Delay time td Rise time tr - - 40 ns Turn-off time toff - - 100 ns Storage time ts - - 80 ns Fall time tf - - 30 ns VCC=-30Vdc,IC=-150mAdc, IB1=-15mAdc VCC=-6.0Vdc,IC=-150mAdc, IB1=IB2=-15mAdc KSD-T5D021-001 2 SBT2907AU Electrical Characteristic Curves Fig. 1 PC-Ta Fig. 2 hFE-IC Fig. 3 VCE(sat)-IC Fig. 4 Cob-VCB KSD-T5D021-001 3 SBT2907AU Outline Dimension ※Recommend PCB solder land [Unit: mm] KSD-T5D021-001 4 SBT2907AU The AUK Corp. products are intended for the use as components in general electronic equipment (Office and communication equipment, measuring equipment, home appliance, etc.). Please make sure that you consult with us before you use these AUK Corp. products in equipments which require high quality and / or reliability, and in equipments which could have major impact to the welfare of human life(atomic energy control, airplane, spaceship, transportation, combustion control, all types of safety device, etc.). AUK Corp. cannot accept liability to any damage which may occur in case these AUK Corp. products were used in the mentioned equipments without prior consultation with AUK Corp.. Specifications mentioned in this publication are subject to change without notice. KSD-T5D021-001 5