MCC TM Micro Commercial Components 1F1 THRU 1F7 omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features • • • • • Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) Epoxy meets UL 94 V-0 flammability rating Moisture Sensitivity Level 1 Marking : Cathode band and type number Fast Switching for High Efficiency and Low Leakage Maximum Ratings • • • • 1.0 Amp Fast Recovery Plastic Rectifier 50 to 1000 Volts Operating Temperature: -55°C to +150°C Storage Temperature: -55°C to +150°C For capacitive load. Derate current by 20% Typical Thermal Resistance: 67oC/W Junction to Ambient. MCC Part Number 1F1 1F2 1F3 1F4 1F5 1F6 1F7 Maximum Recurrent Peak Reverse Voltage 50V 100V 200V 400V 600V 800V 1000V Maximum RMS Voltage 35V 70V 140V 280V 420V 560V 700V R-1 Maximum DC Blocking Voltage D 50V 100V 200V 400V 600V 800V 1000V A Cathode Mark Electrical Characteristics @ 25°C Unless Otherwise Specified Average Forward Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage Maximum DC Reverse Current At Rated DC Blocking Voltage Typical Junction Capacitance Maximum Reverse Recovery Time 1F1-1F4 1F5 1F6-1F7 IF(AV) 1.0 A IFSM 30A 8.3ms, half sine VF 1.3V IFM = 1.0A; TC = 25°C IR 5.0µA 500uA TC = 25°C TC = 100°C 12pF Measured at 1.0MHz, VR=4.0V B TC = 55°C D C DIMENSIONS CJ trr 150ns 250ns 500ns IF=0.5A, IR=1A, Irr=0.25A INCHES MM DIM NOTE MIN MAX MIN MAX A 0.116 0.140 2.90 3.50 B 0.091 0.102 2.30 2.60 C 0.020 0.024 0.50 0.60 D 0.787 ----- 20.00 ----- Notes:1.High Temperature Solder Exemption Applied, see EU Directive Annex 7. Revision: A www.mccsemi.com 1 of 3 2011/01/01 MCC 1F1 thru 1F7 FIG. 2 - MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT 1.0 PEAK FORWARD SURGE CURRENT, (A) AVERAGE FORWARD CURRENT, (A) FIG. 1 - TYPICAL FORWARD CURRENT DERATING CURVE .8 .6 .4 Single Phase Half Wave 60Hz Resistive or Inductive Load .2 200 8.3ms Single Half Sine-Wave (JEDED Method) 100 50 30 20 10 0 0 25 50 75 100 125 150 AMBIENT TEMPERATURE, ( ) 175 1 10 TJ = 25 1.0 0.3 0.1 Pulse Width=300uS 1% Duty Cycle .03 .01 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 FIG. 5 - TYPICAL JUNCTION CAPACITANCE JUNCTION CAPACITANCE, (pF) 2 TJ = 50 1.0 .6 .4 .2 .1 TJ = 25 .06 .04 .02 .01 20 40 60 80 100 120 140 PERCENT OF RATED PEAK REVERSE VOLTAGE, (%) FIG. 6 - TEST CIRCUIT DIAGRAM AND REVERSE RECOVERY TIME CHARACTERISTIC 200 50 NONINDUCTIVE 100 60 40 (+) 25 Vdc (approx) (-) 20 10 6 4 TJ = 25 10 NONINDUCTIVE trr +0.5A (-) D.U.T 0 PULSE GENERATOR -0.25A (NOTE 2) 1 NONINDUCTIVE OSCILLOSCOPE (NOTE 1) (+) -1.0A NOTES:1 Rise Time = 7ns max. Input Impedance = 1 megohm. 22pF. 2. Rise Time = 10ns max. Souce Impedance = 50 ohms. 2 Revision: A 100 10 6 4 0 INSTANTANEOUS FORWARD VOLTAGE, (V) 1 .1 5 10 50 NUMBER OF CYCLES AT 60Hz FIG. 4 - TYPICAL REVERSE CHARACTERISTICS 20 INSTANTANEOUS REVERSE CURRENT, (uA) INSTANTANEOUS FORWARD CURRENT, (A) FIG. 3 - TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS 3.0 TM Micro Commercial Components .2 .4 1cm SET TIME BASE FOR 50/100 ns/cm 1.0 2 4 10 20 40 100 REVERSE VOLTAGE, ( V ) www.mccsemi.com 2 of 3 2011/01/01 MCC TM Micro Commercial Components Ordering Information : Device Packing Part Number-TP Tape&Reel: 5Kpcs/Reel Part Number-AP Ammo Packing: 3Kpcs/Ammo Box ***IMPORTANT NOTICE*** Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***LIFE SUPPORT*** MCC's products are not authorized for use as critical components in life support devices or systems without the express written approval of Micro Commercial Components Corporation. ***CUSTOMER AWARENESS*** Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized distributors. www.mccsemi.com Revision: A 3 of 3 2011/01/01