MCC
TM
Micro Commercial Components
omponents
20736 Marilla Street Chatsworth
!"#
$
% !"#
1N914(A)(B)
)HDWXUHV
•
•
•
•
•
•
Moisture Sensitivity Level 1
Low Current Leakage
Compression Bond Construction
Low Cost
Marking : Cathode band and type number
Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates
Compliant. See ordering information)
0D[LPXP5DWLQJV
•
•
•
500mW 100 Volt
Silicon Epitaxial
Diodes
DO-35
O
O
Operating Temperature: -55 C to +150 C
Storage Temperature: -55OC to +150 OC
Maximum Thermal Resistance; 300OC/W Junction To Ambient
Electrical Characteristics @ 25OC Unless Otherwise Specified
Maximum Repetitive
Reverse Voltage
Average Rectified
Forward Current
Power Dissipation
Junction Temperature
Peak Forward Surge
Current
Minimum Breakdown
Voltage
Maximum
Instantaneous
Forward Voltage
1N914
1N914 A
1N914 B
1N914 B
Maximum Reverse
Current
Typical Junction
Capacitance
Reverse Recovery
Time
VRRM
100V
IO
200mA
PD
TJ
500mW
150OC
1.0A
IFSM
VR
4.0A
100V
75V
D
A
Cathode
Mark
Pulse Width=1.0
second
Pulse Width=1.0
microsecond
IR=100uA,
IR=5.0uA
B
D
C
O
VF
IR
1.0V
720mV
25nA
5.0uA
50uA
CJ
4.0pF
Trr
4.0nS
TJ = 25 C
IFM = 10mA;
IFM = 20mA;
IFM = 100mA;
IFM = 5.0mA;
O
VR=20V, TJ=25 C,
O
VR=75V, TJ=25 C,
O
VR=20V, TJ=150 C
Measured at 1.0MHz,
VR=0V
IF=10mA
VR = 6V
RL=100 Ù, Irr=1.0mA
DIMENSIONS
DIM
A
B
C
D
INCHES
MIN
------1.000
MAX
.166
.079
.020
---
MM
MIN
------25.40
MAX
4.2
2.00
.52
---
NOTE
*Pulse test: Pulse width 300 usec, Duty cycle 2%
Note:
1. Lead in Glass Exemption Applied, see EU Directive Annex 5.
Revision: A
www.mccsemi.com
1 of 4
2011/01/01
MCC
1N914(A)(B)
TM
Micro Commercial Components
Figure 1
Typical Forward Characteristics
20
1N914B
1N914A
10
Figure 2
Forward De rating Curve
600
6
1N914
4
500
2
400
MilliAmps 1
.6
300
MilliWatts
.4
200
.2
25OC
100
.1
Single Phase, Half Wave
60Hz Resistive or Inductive Load
.06
0
.04
0
50
75
100
125
150
175
O
C
.02
.01
.4
.6
.8
1.0
1.2
Admissable Power Dissipation - MilliWatts versus
Ambient Temperature - OC
1.4
Volts
Instantaneous Forward Current - Amperes versus
Instantaneous Forward Voltage - Volts
Figure 3
Junction Capacitance
10
6
4
2
pF
TJ =25OC
1
.6
.4
.2
.1
.1
.2
.4
1
2
10
4
20
40
100 200
400
1000
Volts
Junction Capacitance - pF versus
Reverse Voltage - Volts
Revision: A
www.mccsemi.com
2 of 4
2011/01/01
MCC
1N914(A)(B)
TM
Micro Commercial Components
Figure 4
Typical Reverse Characteristics
Figure 5
Peak Forward Surge Current
1000
1200
600
400
1000
200
800
100
600
60
MilliAmps
40
400
200
20
0
10
NanoAmp
1
2
4
6 8 10 20
40
60 80 100
6
Cycles
4
Peak Forward Surge Current - Amperes versus
Number Of Cycles At 60Hz - Cycles
2
1
.6
.4
.2
.1
20
40
60
80
100
120
140
TJ
Instantaneous Reverse Leakage Current - NanoAmperes
O
versus Junction Temperature - C
Revision: A
www.mccsemi.com
3 of 4
2011/01/01
MCC
TM
Micro Commercial Components
Ordering Information :
Device
Packing
Part Number-TP
Tape&Reel: 10Kpcs/Reel
Part Number-AP
Ammo Packing: 5Kpcs/AmmoBox
Part Number-BP
Bulk: 100Kpcs/Carton
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
www.mccsemi.com
Revision: A
4 of 4
2011/01/01