MCC
FR151S
TM
Micro Commercial Components
omponents
20736 Marilla Street Chatsworth
!"#
$
% !"#
Features
•
•
•
•
•
THRU
FR157S
1.5 Amp Fast
Recovery Rectifier
50 to 1000 Volts
Epoxy meets UL 94 V-0 flammability rating
Moisture Sensitivity Level 1
Fast Switching Speed For High Efficiency
High Current Capability
Lead Free Finish/RoHS Compliant (Note1) ("P"Suffix designates
Compliant. See ordering information)
Maximum Ratings
•
•
DO-41
Operating Temperature: -55°C to +150°C
Storage Temperature: -55°C to +150°C
MCC
Catalog
Number
Device
Marking
FR151S
FR152S
FR153S
FR154S
FR155S
FR156S
FR157S
FR151S
FR152S
FR153S
FR154S
FR155S
FR156S
FR157S
Maximum
Recurrent
Peak Reverse
Voltage
50V
100V
200V
400V
600V
800V
1000V
Maximum
RMS
Voltage
35V
70V
140V
280V
420V
560V
700V
Maximum
DC
Blocking
Voltage
50V
100V
200V
400V
600V
800V
1000V
D
A
Cathode
Mark
B
D
Electrical Characteristics @ 25°C Unless Otherwise Specified
Average Forward
Current
Peak Forward Surge
Current
Maximum
Instantaneous
Forward Voltage
Maximum DC
Reverse Current At
Rated DC Blocking
Voltage
Maximum Reverse
Recovery Time
FR151S-154S
FR155S
FR156S-157S
Typical Junction
Capacitance
IF(AV)
1.5 A
TA = 55°C
IFSM
50A
8.3ms, half sine
VF
1.3V
IFM = 1.5A;
TA = 25°C
C
DIMENSIONS
IR
5.0µA
100µA
TA = 25°C
TA = 100°C
Trr
150ns
250ns
500ns
20pF
IF=0.5A, IR=1.0A,
Irr=0.25A
CJ
DIM
A
B
C
D
INCHES
MIN
.166
.080
.028
1.000
MAX
.205
.107
.034
---
MM
MIN
4.10
2.00
.70
25.40
MAX
5.20
2.70
.90
---
NOTE
Measured at
1.0MHz, VR=4.0V
*Pulse Test: Pulse Width 300µsec, Duty Cycle 1%
Note:
1. High Temperature Solder Exemption Applied, see EU Directive Annex 7.
Revision: A
www.mccsemi.com
1 of 4
2011/01/01
MCC
FR151S thru FR157S
Figure 1
Typical Forward Characteristics
TM
Micro Commercial Components
20
Figure 2
Forward Derating Curve
10
3.0
6
4
2.5
2
25°C
Amps
2.0
1
.6
1.5
Amps
.4
1.0
.2
.5
.1
Single Phase, Half Wave
60Hz Resistive or Inductive Load
.06
0
.04
0
50
75
100
125
150
175
°C
.02
.01
.4
.6
.8
1.0
Average Forward Rectified Current - Amperesversus
Ambient Temperature -°C
1.4
12
Volts
Instantaneous Forward Current - Amperesversus
Instantaneous Forward Voltage - Volts
Figure 3
Junction Capacitance
100
60
40
20
pF
TJ=25°C
10
6
4
2
1
.1
.2
.4
1
Volts
2
4
10
20
40
100
200
400
1000
Junction Capacitance - pFversus
Reverse Voltage - Volts
Revision: A
www.mccsemi.com
2 of 4
2011/01/01
MCC
FR151S thru FR157S
Micro Commercial Components
Figure 4
Maximum Non-Repetitive Forward Surge Current
90
75
60
45
Amps
30
15
0
1
2
4
6
8 10
20
40
60 80 100
Cycles
Peak Forward Surge Current - Amperesversus
Number Of Cycles At 60Hz - Cycles
Figure 5
Reverse Recovery Time Characteristic And Test Circuit Diagram
50Ω
10Ω
trr
+0.5A
0
Pulse
Generator
Note 2
25Vdc
1Ω
Oscilloscope
Note 1
-1.0
1cm
Set Time Base for 20/100ns/cm
Notes:
1. Rise Time = 7ns max.
Input impedance = 1 megohm, 22pF
2. Rise Time = 10ns max.
Source impedance = 50 ohms
3. Resistors are non-inductive
Revision: A
-0.25
www.mccsemi.com
3 of 4
2011/01/01
TM
MCC
TM
Micro Commercial Components
Ordering Information :
Device
Packing
Part Number-TP
Tape&Reel: 5Kpcs/Reel
Part Number-AP
Ammo Packing: 5Kpcs/Ammo Box
Part Number-BP
Bulk: 50Kpcs/Carton
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
www.mccsemi.com
Revision: A
4 of 4
2011/01/01