MCC TM Micro Commercial Components MBR2535FCT THRU MBR2560FCT omponents 20736 Marilla Street Chatsworth !"# $ % !"# Features • • • • • • • • • 30 Amp Schottky Barrier Rectifier 35 to 60 Volts Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 Metal silicon junction, majority carrier conduction Low power loss, high efficiency High surge capability For use in low voltage, high frequency inverters, free wheeling, and polarity protection applications Guardring for overvoltage protection Marking : type number Lead Free Finish/RoHS Compliant(Note 1) ("P" Suffix designates RoHS Compliant. See ordering information) Case Material: Molded Plastic. UL Flammability Classification Rating 94V-0 and MSL Rating 1 ITO-220AB B M C Maximum Ratings • • • Storage Temperature: -55°C to +150°C Maximum Thermal Resistance: 4.5oC/W junction to Case For capacitive load.Derate current by 20% D A K PIN 1 MCC Part Number Maximum Recurrent Peak Reverse Voltage Maximum RMS Voltage Maximum DC Blocking Voltage 35V 45V 50V 60V 24.5V 31.5V 35V 42V 35V 45V 50V 60V MBR2535FCT MBR2545FCT MBR2550FCT MBR2560FCT 2 3 E F O I G J N H H PIN 1 Electrical Characteristics @ 25°C Unless Otherwise Specified Aver age Forward Rectified Current Peak Forward Surge Current Maximum Instantaneous Forward Voltage MBR2535FCT-2545FCT MBR2550FCT-2560FCT MBR2535FCT-2545FCT MBR2550FCT-2560FCT Maximum DC Reverse Current At Rated DC Blocking Voltage MBR2535FCT-2545FCT MBR2550FCT-2560FCT MBR2535FCT-2545FCT MBR2550FCT-2560FCT Typical Junction Capacitance L PIN 2 PIN 3 I(AV) 30A TA = 130°C IFSM 150A 8.3ms, half sine VF IR CJ 0.82V 0.75V 0.73V 0.65V IFM = 30A; TC = 25°C IF=15A, Tc=25°C IFM = 30A; TC = 125°C IF=15A, Tc=125°C 0.2mA 1.0mA 40mA 50mA TC = 25°C 1000pF TC = 125°C Measured at 1.0MHz, V R=4.0V A B C D E F G H I J K L M N O INCHES .583 .642 --.406 .100 .112 .248 .272 --.161 --.071 .512 .543 .100 --.035 --.032 .118 .134 --.189 --.130 .098 .114 --.055 MM 14.80 --2.55 6.30 ----13.00 16.30 10.30 2.85 6.90 4.10 1.80 13.80 2.55 ----3.00 ----2.50 --- 0.90 0.80 3.40 4.80 3.30 2.90 1.40 Notes:1.High Temperature Solder Exemption Applied, see EU Directive Annex 7. www.mccsemi.com Revision: 7 1 of 3 2010/01/05 MCC MBR2535FCT thru MBR2560FCT TM Micro Commercial Components RATINGS AND CHARACTERISTIC CURVES (MBR2535FCT THRU MBR2560FCT) FIG.2- MAXIMUM NON-REPETITIVE FORWARD SURGE CURRENT PER LEG FIG.1- FORWARD CURRENT DERATING CURVE 150 PEAK FORWARD SURGE CURRENT. (A) AVERAGE FORWARD CURRENT. (A) 30 RESISTIVE OR INDUCTIVE LOAD 24 18 12 6 0 Tj=Tj max. 8.3ms Single Half Sine Wave JEDEC Method 125 100 75 50 25 0 0 50 100 1 150 10 CASE TEMPERATURE. ( C) FIG.3- TYPICAL INSTANTANEOUS FORWARD CHARACTERISTICS PER LEG FIG.4- TYPICAL REVERSE CHARACTERISTICS PER LEG 50 10 10 Tj=150 0C INSTANTANEOUS REVERSE CURRENT. (mA) INSTANTANEOUS FORWARD CURRENT. (A) 40 100 NUMBER OF CYCLES AT 60Hz o Pulse Width=300 s 1% Duty Cycle 1 Tj=25 0C 0.1 MBR2535FCT-MBR2545FCT MBR2550FCT & MBR2560FCT Tj=125 0C 1 Tj=75 0C 0.1 0.01 Tj=25 0C MBR2535FCT-MBR2545FCT MBR2550FCT & MBR2560FCT 0.01 0 0.1 0.2 0.3 0.4 0.001 0 0.5 0.6 0.7 0.8 0.9 1.0 1.1 1.2 FIG.5- TYPICAL JUNCTION CAPACITANCE PER LEG 40 60 80 100 120 140 FIG.6- TYPICAL TRANSIENT THERMAL IMPEDANCE PER LEG 5,000 TRANSIENT THERMAL IMPEDANCE. ( C/W) 100 O Tj=25 0C f=1.0MHz Vsig=50mVp-p JUNCTION CAPACITANCE.(pF) 20 PERCENT OF RATED PEAK REVERSE VOLTAGE. (%) FORWARD VOLTAGE. (V) 1,000 MBR2535FCT-MBR2545FCT MBR2550FCT & MBR2560FCT 100 0.1 1 10 100 REVERSE VOLTAGE. (V) 10.0 1 0.1 0.01 0.1 1 10 100 T, PULSE DURATION. (sec) www.mccsemi.com 2 of 3 Revision: 7 2010/01/05 MCC TM Micro Commercial Components Ordering Information Device Packing (Part Number)-BP Bulk;1Kpcs/Box ***IMPORTANT NOTICE*** Micro Commercial Components Corp . reserves the right to make changes without further notice to any product herein to make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are represented on our website, harmless against all damages. ***APPLICATIONS DISCLAIMER*** Products offer by Micro Commercial Components Corp . are not intended for use in Medical, Aerospace or Military Applications. www.mccsemi.com Revision: 7 3 of 3 2010/01/05 4