MCC
TM
Micro Commercial Components
SMAJ5.0
THRU
SMAJ440CA
omponents
20736 Marilla Street Chatsworth
!"#
$
% !"#
Features
•
•
•
•
•
•
•
For Surface Mount Applications
Unidirectional And Bidirectional
Low Inductance
High Temp Soldering: 260°C for 10 Seconds At Terminals
For Bidirectional Devices Add “C” To The Suffix of The Part
Number: i.e.SMAJ5.0CA for 5% Tolerance
Lead Free Finish/Rohs Compliant (Note1) ("P"Suffix designates
Compliant. See ordering information)
UL Recognized File # E331408
0HFKDQLFDO'DWD
•
•
•
400 Watt
Transient Voltage
Suppressors
5.0 to 440 Volts
DO-214AC
(SMA)( LEAD FRAME)
Epoxy meets UL 94 V-0 flammability rating
Moisture Sensitivity Level 1
Polarity: Indicated by cathode band except bi-directional types
A
B
0D[LPXP5DWLQJ
•
•
•
Operating Temperature: -55°C to +150°C
Storage Temperature: -55°C to +150°C
Typical Thermal Resistance: 25 /W Junction to Ambient
C
F
H
D
Peak Pulse Current on
10/1000
IPPM
G
See Table 1 Note 2
E
DIMENSIONS
Peak Pulse Power Dissipation
Steady State Power Dissipation
Peak Forward Surge Current
Note:
PPPM
PM(AV)
IFSM
Min 400 W
1.0 W
40A
Note 2, 6
Note 2, 5
Note:5
1. High Temperature Solder Exemptions Applied, see EU Directive Annex 7.
2. Non-repetitive current pulse, per Fig.3 and derated above
TA=25 per Fig.2.
3. Mounted on 5.0mm2 copper pads to each terminal.
4. 8.3ms, single half sine wave duty cycle = 4 pulses per
Minutes maximum.
5. Lead temperature at TL = 75 .
6. Peak pulse power waveform is 10/1000 .
DIM
A
B
C
D
E
F
G
H
INCHES
MIN
.157
.098
.006
.030
.188
.078
.055
.002
MAX
.181
.114
.012
.060
.208
.096
.062
.008
MM
MIN
4.00
2.50
0.152
0.76
4.80
2.00
1.40
0.051
MAX
4.60
2.90
0.305
1..52
5.28
2.44
1.60
0.203
NOTE
SUGGESTED SOLDER
PAD LAYOUT
0.090 ”
MA X
0.058 ” MI N
0.070"
MI N
www.mccsemi.com
1 of 4
Revision: B
2011/09/16
MCC
TM
SMAJ5.0 thru SMAJ440CA
Micro Commercial Components
PEAK PULSE POWER(Ppp) OR
CURRENT(Ipp) DERATING IN
PERCENTAGE %
PPPM , PEAK PULSE POWER, KW
100
100
NON-REPETITIVE
PULSE WAVEFORM
SHOWN IN FIGURE 3
TA = 25 °C
10
1.0
MOUNTED ON 5.0mm 2
COPPER LAND AREAS
0.1
0.1us
1.0 us
10 us
100 us
1.0ms
75
50
25
0
10ms
0
25
td, PULSE WIDTH, SEC
50
75
100
125
150
175
200
TA, AMBIENT TEMPERATURE, °C
Fig. 1-PEAK PULSE POWER RATING CURVE
Fig. 2-PULSE RATING CURVE
10,000
40,000
150
20,000
Pulse Width(td) is Defined as the
Point Where the Peak Current
sec
CJ, CAPACITANCE, pF
Ippm, PEAK PULSE CURRENT, %
TA = 25 °C
tf = 10
Decays to 50% of lpp
Peak Value Ippm
100
Half Value- Ipp
2
10/1000
50
TJ = 25 °C
f = 1.0MHz
Vsig = 50mVp-p
sec Waveform
as Defined by R.E.A.
MEASURED AT
ZERO BIAS
1,000
6,000
4,000
2,000
100
MEASURED AT
STAND-OFF
VOLTAGE(VMW)
500
200
0
e-kt
td
0
1.0
2.0
3.0
10
1.0
4.0
2.0
5.0
10
20
50
100
200
V(BR), BREAKDOWN VOLTAGE, VOLTS
t, TIME , ms
Fig. 3-PULSE WAVEFORM
Fig. 4-TYPICAL JUNCTION CAPACITANCE
Ifsm, PEAK FORWARD SURGE
CURRENT, AMPERES
50
TJ = TJ max
8.3mss SINGLE HALF
SINCE-WAVE JEDEC
METHOD
40
30
20
10
0
1
4
10 20
40
100
NUMBER OF CYCLES AT 60Hz
Fig. 5-MAXIMUM NON-REPETITIVE PEAK FORWARD
SURGE CURRENT
Revision: B
www.mccsemi.com
2 of 4
2011/09/16
MCC
SMAJ5.0 thru SMAJ440CA
Micro Commercial Components
ELECTRICAL CHARACTERISTICS @25qC
MCC
PART NUMBER
UNI-POLAR
SMAJ5.0A
SMAJ6.0A
SMAJ6.5A
SMAJ7.0A
SMAJ7.5A
SMAJ8.0A
SMAJ8.5A
SMAJ9.0A
SMAJ10A
SMAJ11A
SMAJ12A
SMAJ13A
SMAJ14A
SMAJ15A
SMAJ16A
SMAJ17A
SMAJ18A
SMAJ20A
SMAJ22A
SMAJ24A
SMAJ26A
SMAJ28A
SMAJ30A
SMAJ33A
SMAJ36A
SMAJ40A
SMAJ43A
SMAJ45A
SMAJ48A
SMAJ51A
SMAJ54A
SMAJ58A
SMAJ60A
SMAJ64A
SMAJ70A
SMAJ75A
SMAJ78A
SMAJ85A
SMAJ90A
SMAJ100A
SMAJ110A
SMAJ120A
SMAJ130A
SMAJ150A
SMAJ160A
SMAJ170A
SMAJ180A
SMAJ200A
SMAJ220A
SMAJ250A
SMAJ300A
SMAJ350A
SMAJ400A
SMAJ440A
BI-POLAR
SMAJ5.0CA
SMAJ6.0CA
SMAJ6.5CA
SMAJ7.0CA
SMAJ7.5CA
SMAJ8.0CA
SMAJ8.5CA
SMAJ9.0CA
SMAJ10CA
SMAJ11CA
SMAJ12CA
SMAJ13CA
SMAJ14CA
SMAJ15CA
SMAJ16CA
SMAJ17CA
SMAJ18CA
SMAJ20CA
SMAJ22CA
SMAJ24CA
SMAJ26CA
SMAJ28CA
SMAJ30CA
SMAJ33CA
SMAJ36CA
SMAJ40CA
SMAJ43CA
SMAJ45CA
SMAJ48CA
SMAJ51CA
SMAJ54CA
SMAJ58CA
SMAJ60CA
SMAJ64CA
SMAJ70CA
SMAJ75CA
SMAJ78CA
SMAJ85CA
SMAJ90CA
SMAJ100CA
SMAJ110CA
SMAJ120CA
SMAJ130CA
SMAJ150CA
SMAJ160CA
SMAJ170CA
SMAJ180CA
SMAJ200CA
SMAJ220CA
SMAJ250CA
SMAJ300CA
SMAJ350CA
SMAJ400CA
SMAJ440CA
REVERSE
STAND-OFF
VOLTAGE
VWM
(VOLTS)
5.0
6.0
6.5
7.0
7.5
8.0
8.5
9.0
10
11
12
13
14
15
16
17
18
20
22
24
26
28
30
33
36
40
43
45
48
51
54
58
60
64
70
75
78
85
90
100
110
120
130
150
160
170
180
200
220
250
300
350
400
440
BREAKDOWN VOLTAGE
V(BR) @ IT
(VOLTS)
MIN
6.40
6.67
7.22
7.78
8.33
8.89
9.44
10.0
11.1
12.2
13.3
14.4
15.6
16.7
17.8
18.9
20.0
22.2
24.4
26.7
28.9
31.1
33.3
36.7
40.0
44.4
47.8
50.0
53.3
56.7
60.0
64.4
66.7
71.1
77.8
83.3
86.7
94.4
100
111
122
133
144
167
178
189
201
224
246
279
335
391
447
492
MAX
7.00
7.37
7.98
8.60
9.21
9.83
10.4
11.1
12.3
13.5
14.7
15.9
17.2
18.5
19.7
20.9
22.1
24.5
26.9
29.5
31.9
34.4
36.8
40.6
44.2
49.1
52.8
55.3
58.9
62.7
66.3
71.2
73.7
78.6
86.0
92.1
95.8
104
111
123
135
147
159
185
197
209
222
247
272
309
371
432
494
543
I T (mA)
10
10
10
10
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
MAXIMUM
CLAMPING
VOLTAGE @ IPP
(VOLTS)
9.2
10.3
11.2
12.0
12.9
13.6
14.4
15.4
17.0
18.2
19.9
21.5
23.2
24.4
26.0
27.6
29.2
32.4
35.5
38.9
42.1
45.4
48.4
53.3
58.1
64.5
69.4
72.7
77.4
82.4
87.1
93.6
96.8
103
113
121
126
137
146
162
177
193
209
243
259
275
292
324
356
405
486
567
648
713
PEAK PULSE
CURRENT
IPP
(AMPS)
43.5
38.8
35.7
33.3
31.0
29.4
27.7
26.0
23.5
22.0
20.1
18.6
17.2
16.4
15.3
14.5
13.7
12.3
11.2
10.3
9.5
8.8
8.3
7.5
6.9
6.2
5.7
5.5
5.2
4.9
4.6
4.3
4.1
3.9
3.5
3.3
2.2
2.9
2.7
2.5
2.3
2.1
1.9
1.6
1.5
1.5
1.4
1.2
1.1
1.0
0.8
0.7
0.6
0.6
MAXIMUM
REVERSE
LEAKAGE
@VWM
ID
(PA)
800
800
500
200
100
50
20
10
5
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
MARKING
CODE
1
AE
AG
AK
AM
AP
AR
AT
AV
AX
AZ
BE
BG
BK
BM
BP
BR
BT
BV
BX
BZ
CE
CG
CK
CM
CP
CR
CT
CV
CX
CZ
RE
RG
RK
RM
RP
RR
RT
RV
RX
RZ
SE
SG
SK
SM
SP
SR
ST
SV
SX
SZ
TE
TG
TK
TM
2
WE
WG
WK
WM
WP
WR
WT
WV
WX
WZ
XE
XG
XK
XM
XP
XR
XT
XV
XX
XZ
YE
YG
YK
YM
YP
YR
YT
YV
YX
YZ
ZE
ZG
ZK
ZM
ZP
ZR
ZT
ZV
ZX
ZZ
VE
VG
VK
VM
VP
VR
VT
VV
VX
VZ
UE
UG
UK
UM
For bi-directional type having Vrwm of 10 Volts and less, the IR limit is double.
For parts without A, the VBR is +10%.
Revision: B
www.mccsemi.com
3 of 4
2011/09/16
TM
MCC
TM
Micro Commercial Components
Ordering Information :
Device
Packing
Part Number-TP
Tape&Reel: 5Kpcs/Reel
***IMPORTANT NOTICE***
Micro Commercial Components Corp. reserves the right to make changes without further notice to any product herein to
make corrections, modifications , enhancements , improvements , or other changes . Micro Commercial Components
Corp . does not assume any liability arising out of the application or use of any product described herein; neither does it
convey any license under its patent rights ,nor the rights of others . The user of products in such applications shall assume all
risks of such use and will agree to hold Micro Commercial Components Corp . and all the companies whose products are
represented on our website, harmless against all damages.
***LIFE SUPPORT***
MCC's products are not authorized for use as critical components in life support devices or systems without the express written
approval of Micro Commercial Components Corporation.
***CUSTOMER AWARENESS***
Counterfeiting of semiconductor parts is a growing problem in the industry. Micro Commercial Components (MCC) is taking
strong measures to protect ourselves and our customers from the proliferation of counterfeit parts. MCC strongly encourages
customers to purchase MCC parts either directly from MCC or from Authorized MCC Distributors who are listed by country on
our web page cited below. Products customers buy either from MCC directly or from Authorized MCC Distributors are genuine
parts, have full traceability, meet MCC's quality standards for handling and storage. MCC will not provide any warranty
coverage or other assistance for parts bought from Unauthorized Sources. MCC is committed to combat this global
problem and encourage our customers to do their part in stopping this practice by buying direct or from authorized
distributors.
www.mccsemi.com
Revision: B
4 of 4
2011/09/16