NKK A26J

Process Sealed Subminiature Toggles
Series A
Distinctive Characteristics
Subminiature size saves space on PC boards.
Specifically developed for logic-level applications.
Totally sealed body construction prevents contact contamination
and allows time- and money-saving automated soldering and
cleaning.
Award-winning STC contact mechanism with
benefits unavailable in conventional mechanisms:
smoother, positive detent actuation, increased
contact stability and unparalleled logic-level
reliability. (Additional STC details in Terms &
Acronyms; see Supplement contents.)
Molded-in, epoxy sealed or ultrasonically
welded terminals lock out flux, solvents,
and other contaminants.
.100” x .100” (2.54mm x 2.54mm) terminal
spacing conforms to standard PC board grid
spacing.
Toggle option in antistatic material available for
dissipating electrostatic discharges.
Matching indicators available and shown at the end of Section M.
Actual Size
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Process Sealed Subminiature Toggles
Series A
General Specifications
Electrical Capacity (Resistive Load)
Logic Level:
Other Ratings
Contact Resistance:
Insulation Resistance:
Dielectric Strength:
Mechanical Life:
Electrical Life:
Nominal Operating Force:
Contact Timing:
Angle of Throw:
Materials & Finishes
Toggle:
Case Housing:
Support Bracket:
Movable Contact:
Stationary Contacts:
Terminals:
Environmental Data
Operating Temperature Range:
Humidity:
Vibration:
Shock:
PCB Processing
Soldering:
Cleaning:
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Note: Find additional explanation of operating range in Supplement section.
50 milliohms maximum
500 megohms minimum @ 500V DC
500V AC minimum between contacts for 1 minute minimum;
500V AC minimum between contacts & case for 1 minute minimum
100,000 operations minimum for On-None-On & On-Off-On
50,000 operations minimum for other circuits
50,000 operations minimum
1.47N (momentary); 1.18N (maintained) for .394” (10.0mm) toggles
2.73N (momentary); 1.84N (maintained) for all other toggles
Nonshorting (break-before-make)
26°
Glass fiber reinforced polyamide for antistatic; nickel plated brass for all others
Glass fiber reinforced polyamide
Tin plated phosphor bronze
Phosphor bronze with gold plating
Brass with gold plating
Brass with gold plating
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 240 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s2) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Wave Soldering Recommended. See Profile A in Supplement section.
Manual Soldering: See Profile B in Supplement section.
Automated cleaning. See Cleaning Specifications in Supplement section.
Standards & Certifications
UL Recognition
or CSA Certification:
The A Series toggles have not been tested for UL recognition or CSA certification.
These switches are designed for use in a low-voltage, low-current, logic-level circuit.
When used as intended in a logic-level circuit, the results do not produce hazardous energy.
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Process Sealed Subminiature Toggles
Series A
TYPICAL SWITCH ORDERING EXAMPLE
1
A
2
J
V
PC TERMINALS
POLES
1
SPST
SPDT
2
DPDT
SP3T
CIRCUITS
P
Straight
B
Straight with Bracket
B1
Straight with Inline Bracket
(Single Pole only)
H
Right Angle with Bracket
V
Vertical with Bracket
V1
Vertical with Inline Bracket
(Single Pole only)
W
Straight Long
1
OFF
NONE
ON
2
ON
NONE
ON
3
ON
OFF
ON
5
ON
NONE
(ON)
R
(ON)
NONE
ON
8
(ON)
OFF
(ON)
A
.394” (10.0mm) Bat
G
.394” (10.0mm) Bat Lever Cap
9
ON
OFF
(ON)
J
.248” (6.3mm) Bat
J
.248” (6.3mm) Bat Lever Cap
S
(ON)
OFF
ON
J2
.248” (6.3mm) Antistatic Bat
*4
ON
ON
ON
E
.394” (10.0mm) Flatted
*6
(ON)
ON
(ON)
H
.248” (6.3mm) Flatted
A
Short Paddle for K Toggle
*7
ON
ON
(ON)
K
Snap Top for A or B Paddle
B
Long Paddle for K Toggle
TOGGLES
OPTIONAL CAPS
PADDLES
( ) = Momentary
* 3-ON circuits
CAP
COLORS
PADDLE
COLORS
A
Black
A
B
White
B
DESCRIPTION FOR TYPICAL ORDERING EXAMPLE
C
Red
C
A12JV
---
Yellow
E
---
Green
F
---
Blue
G
---
Gray
H
.248” (6.3mm) Long
Bat Toggle
SPDT
ON-NONE-ON Circuit
Vertical PC Terminals
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Series A
Process Sealed Subminiature Toggles
POLES & CIRCUITS
Toggle Position
( ) = Momentary
Up
Center
Connected Terminals
Down
Throw & Schematics
Up
Center
Down
Note:
Pole
Model
SP
A11
OFF
NONE
ON
OPEN
OPEN
3-1
SPST
SP
A12
A13
A15
A1R
A18
A19
A1S
ON
ON
ON
(ON)
(ON)
ON
(ON)
NONE
OFF
NONE
NONE
OFF
OFF
OFF
ON
ON
(ON)
ON
(ON)
(ON)
ON
2-3
OPEN
2-1
SPDT
DP
A22
A23
A25
A2R
A28
A29
A2S
ON
ON
ON
(ON)
(ON)
ON
(ON)
NONE
OFF
NONE
NONE
OFF
OFF
OFF
ON
ON
(ON)
ON
(ON)
(ON)
ON
2-3 5-6
OPEN
2-1 5-4
DPDT
Slot
Terminal numbers are
not actually on the switch.
Slot
1
3
INTERNAL
CONNECTION
2 (COM)
3
1
2
5
(COM)
3
1
6
4
For 3 Throw (3-on)
Connected Terminals & Schematics
External Connection
Pole
Model
Up
Center
Down
SP
A24
A26
A27
ON
(ON)
ON
ON
ON
ON
ON
(ON)
(ON)
External
Connection
5
2 (in)
External
Connection
5
2 (in)
1 (out)
1 (out)
3 4 (out) 6 (out)
3 4 (out) 6 (out)
1 (out)
3 4 (out) 6 (out)
(out)
(out)
External
Connection
5
2 (in)
2-3 5-4
2-3 5-6
The SP3T model utilizes
a double pole base.
2-1 5-4
External
connections
must be made
during field
installation.
Common
(in)
1
4
2
5
3
6
External
Conn
(out)
TOGGLES
Standard Material & Finish: Brass with Bright Nickel
A
J
.394” (10.0mm) Bat
Material & Finish for J2: Matte finish black glass fiber reinforced polyamide
J2
.248” (6.3mm) Bat
.248” (6.3mm) Antistatic Bat
26°
(2.6) Dia
.102
(10.0)
.394
E
(6.3)
.248
H
.394” (10.0mm) Flatted
26°
(1.6)
.063
(10.0)
.394
Dissipating 20Kv ESD: Straight PC
26°
(2.6) Dia
.102
Dissipating 10Kv ESD: Straight PC
with Bracket, Right Angle, & Vertical
K
.248” (6.3mm) Flatted
(2.7)
.106
26°
(6.3)
.248
26°
(1.6)
.063
(6.3)
.248
(2.1) Dia
.083
Snap Top for Paddles
(2.6)
.102
26°
(5.0)
.197
(1.6)
.063
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
(2.5)
.098
03-07
Process Sealed Subminiature Toggles
Series A
PC TERMINALS
Use of a support bracket is recommended to increase PCB mounting strength and stability.
P
B
Straight
Straight with Inline Bracket
Single Pole only
B1
Straight with Bracket
(10.16)
.400
(5.08)
.200
(5.08)
.200
(0.3) Typ
.012
(2.54) Typ
.100
(5.08) Typ
.200
(0.6) Dia Typ
.024
(10.16)
.400
(2.54)
.100
(0.3) Typ
.012
(2.54) Typ
.100
(0.6) Dia Typ
.024
(0.7) Typ
.028
(2.54) Typ
.100
(0.6) Dia Typ
.024
(0.7) Typ
.028
(0.8)
.031
(1.0)
.039
CL
(9.0)
.354
H
(9.0)
.354
(8.8)
.346
Right Angle
with Bracket
V
(5.08)
.200
(2.54) Typ
.100 (0.6) Dia Typ
.024
(2.54) Typ
.100
(8.8)
.346
W
(0.6) Dia Typ
.024
(0.5) Typ
.020
(0.7)
.028
(9.0)
.354
(2.54) Typ
.100
(0.6) Dia Typ
.024
(0.6) Dia Typ
.024
(0.5) Typ
.020
(18.9)
.744
(5.08)
.200
(0.3)
.012
(9.0)
.354
Straight Long
(5.08)
.200
(2.54) Typ
.100
(2.54) Typ
.100
(5.08)
.200
(0.3)
.012
(5.08)
.200 (0.3)
.012 (0.7)
.028
(0.5)
.020
Vertical with Inline Bracket
Single Pole only
V1
Vertical with Bracket
(5.08)
.200
(9.0)
.354
(8.8)
.346
(0.7)
.028
CL
(9.0)
.354
(8.8)
.346
(1.0)
.039
(0.8)
.031
(5.08)
.200
(9.0)
.354
(8.8)
.346
CAPS & PADDLES
G
AT4003
.394” (10.0mm) Bat Lever Cap
J
AT4064
.248” (6.3mm) Bat Lever Cap
26°
(3.0) Dia
.118
Material: PVC
Colors Available:
A, B, C
A
(11.0)
.433
26°
AT467
Short Paddle
B
(4.6)
.181
26°
(2.4)
.094
Material: Polyamide
Colors Available:
A, B, C, E, F, G, H
(3.0) Dia
.118
Material: PVC
Colors Available:
A, B, C
(10.0)
.394
AT468
Long Paddle
(6.3)
.248
26°
(4.4)
.173
(2.4)
.094
(5.0)
.197
(15.1)
.594
Material: Polyamide
Colors Available:
A, B, C, E, F, G, H
(9.4)
.370
(10.3)
.406
(7.0)
.276
(5.0) Dia
.197
(14.2)
.559
Color Codes:
A
Black
B
White
C
Red
E
Yellow
F
Green
G
Blue
H
Gray
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Process Sealed Subminiature Toggles
Series A
TYPICAL SWITCH DIMENSIONS
Straight PC
Single Pole
(5.0)
.197
(2.6) Dia
.102
(0.4) Typ
.016
(0.6) Dia Typ
.024
(6.0)
.236
26°
(9.8)
.386
2
3
Slot
(4.5)
.177
(0.3)
.012
(10.0)
.394
(5.84)
.230
(2.54) Typ
.100
(3.1)
.122
(0.5)
.020
(13.1)
.516
2
(2.54) Typ
.100
(0.8) Dia Typ
.031
3
CL
(1.0)
.039
(5.08)
.200
CL
A12AP
(1.0)
.039
1
1
A11 models do not have Terminal 2
Straight PC
Double Pole
(5.0)
.197
(0.6) Dia Typ
.024
(2.6) Dia
.102
(0.4) Typ
.016
(6.0)
.236
26°
Slot
(9.2)
.362
(2.54) Typ
.100
(3.1)
.122
(0.8)
.031
(13.1)
.516
(3.5)
.138
(10.0)
.394
(0.4)
.016
1
4
2
5
3
6
(9.8)
.386
4
1
5
2
6
3
(5.08)
.200
(2.54) Typ
.100
(0.8) Dia Typ
.031
(5.08)
.200
A22AP
Straight PC • Bracket
Single Pole
(5.0)
.197
(0.3) Typ
.012
(2.6) Dia
.102
(6.0)
.236
(10.16)
.400
26°
Slot
(0.3)
.012
(4.5)
.177
(5.84)
.230
(10.0)
.394
(0.5)
.020
(13.1)
.516
(0.7) Typ
.028
(0.6) Dia Typ
.024
1
2
3
(1.0)
.039
1
(9.8)
.386
3
CL
A12AB
1
(2.54) Typ
.100
2
(1.0)
.039
(2.54)
CL .100
(2.54) Typ
.100
(3.1)
.122
(1.0)
.039
2
3
(0.8) Dia Typ
.031
(2.54)
.100
CL
B Terminals
Straight PC • Bracket
(2.54) Typ
.100
(0.8) Dia Typ
.031
B1 Terminals
Double Pole
(5.0)
.197
(2.6) Dia
.102
(6.0)
.236
(0.3) Typ
.012
(10.16)
.400
26°
Slot
(0.4)
.016
(9.5)
.374
(0.6) Dia Typ
.024
(3.5)
.138
(10.0)
.394
(0.8)
.031
(13.1)
.516
(2.54) Typ
.100
(3.1)
.122
(5.08)
.200
1
4
2
5
3
6
(9.8)
.386
(0.7) Typ
.028
(5.08)
.200
4
1
5
2
6
3
(2.54) Typ
.100
(0.8) Dia Typ
.031
A22AB
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07
Process Sealed Subminiature Toggles
Series A
TYPICAL SWITCH DIMENSIONS
Right Angle PC
Single Pole
26°
(6.0)
.236
(0.3)
.012
(2.6) Dia
.102
(0.8)
.031
Slot
(3.3)
.131
(5.0)
.197
(0.3) Typ
.012
(5.08)
.200
3
(0.7)
.028
(10.0)
.394
(9.8)
.386
(9.38)
.369
(4.5)
.177
(6.18)
.243
2 1
(3.1)
.122
(5.08)
.200
1
2
3
(2.54) Typ
.100
(5.08)
.200
(0.8) Dia Typ
.031
(0.6) Dia Typ
.024
(2.54) Typ
.100
A12AH
Right Angle PC
Double Pole
(6.0)
.236
(0.4)
.016
(2.6) Dia
.102
(0.8)
.031
Slot
(5.0)
.197
(0.3) Typ
.012
(5.08)
.200
(5.2)
.205
(3.5)
.138
(9.8)
.386
(10.0)
.394
(0.7)
.028
(5.08)
.200
(16.4)
.646
(2.54)
.100
3
2
1
6
5
4
(10.0)
.394
1
2
(2.54) Typ
.100
(2.54)
3
.100
4
5
6
(5.08)
.200
(3.1)
.122
(0.5)
.020
(0.8) Dia Typ
.031
(0.6) Dia Typ
.024
(2.54) Typ
.100
A22AH
Vertical PC
Single Pole
(5.0)
.197
(0.4)
.016
(0.8)
.031
(2.6) Dia
.102
1
1
(6.0)
.236
26°
Slot
(0.7) Typ
.028
(0.3) Typ
.012
(2.54)
.100
(5.84)
.230
(2.54)
.100
(2.54)
.100
(10.0)
.394
(4.5)
.177
(14.46)
.569
(10.2)
.402
2
(5.3)
.208
(1.0)
.039
(2.54) Typ
.100
3
(0.5)
.020
(1.0)
(3.1)
.039
.122
(2.54) Typ
.100
(0.6) Dia Typ
.024
(1.0)
.039
(5.08)
.200
2
2
3
3
CL
(1.0)
.039
(2.54) Typ
.100
(5.08)
.200
(0.8) Dia Typ
.031
(2.54)
.100
(0.8) Dia Typ
CL .031
CL
A12AV
V Terminals
Vertical PC
1
V1 Terminals
Double Pole
(5.0)
.197
(6.0)
.236
(0.8)
.031
(2.6) Dia
.102
26°
Slot
(0.3) Typ
.012
(5.08)
.200
(0.4) Typ
.016
(5.3)
.208
(3.5)
.138
(9.5)
.374
(10.0)
.394
(0.7)
.028
(5.08)
.200
(18.95)
.746
(0.5)
.020
(1.0)
.039
(2.54) Typ
.100
(3.1)
.122
1
4
2
5
3
6
4
(10.2)
.402
1
5
2
6
3
(5.08)
.200
(2.54) Typ
.100
(5.08)
.200
(0.8) Dia Typ
.031
(0.6) Dia Typ
.024
(5.08)
.200
A22AV
NKK Switches • email: [email protected] • Phone (480) 991-0942 • Fax (480) 998-1435 • www.nkkswitches.com
03-07