MASTER INSTRUMENT CORPORATION MB2505W THRU MB2510W KBPC25005W THRU KBPC2510W VOLTAGE RANGE CURRENT FEATURES l Low cost l This series is UL recognized under component index, file number E127707 l High forward surge current capability l Ideal for printed circuit board l High isolation voltage from case to leads l High temperature soldering guaranteed: 260 oC/10 second, at 5 lbs. (2.3kg) tension. 50 to 1000 Volts 25 Amperes MB-35W 1.14( 28.9) 1.12( 28.4) 0.732( 18.6) 0.692( 17.6) AC 1.14( 28.9) 1.12( 28.4) + 0.732( 18.6) 0.692( 17.6) 0.47( 11.9) 0.43( 10.9) AC - 0.224( 5.7) 0.193( 4.9) 0.570( 14.5) 0.530( 13.5) 0.205( 5.2) 0.197( 5.0) MECHANICAL DATA l Case: Molded plastic body l Terminal: Plated 0.25” (6.35mm) lug. l Polarity: Polarity symbols marked on case l Mounting: Thru hole for #10 screw, 20 in.-lbs torque max. l Weight:0.93 ounce, 26.4 grams 0.46( 11.7) 0.41( 10.5) EXOPY CASE 0.70( 17.8) MIN 0.042( 1.10) DIA 0.038( 0.97) TYP Dimensions in inches and (millimeters) MAXIMUM RATINGS AND ELECTRICAL CHARACTERISTICS Ratings at 25oC ambient temperature unless otherwise specified. Single phase, half wave, 60Hz, resistive or inductive load. For capacitive load derate current by 20%. MB2505 MB251 MB25W MB254 MB256 SYMBOLS KBPC25005 KBPC2501 KBPC2502 KBPC2504 KBPC2506 MB258 KBPC2508 MB2510 KBPC2510 UNITS Maximum Repetitive Peak Reverse Voltage VRRM 50 100 200 400 600 800 1000 Volts Maximum RMS Voltage VRMS 35 70 140 280 420 560 700 Volts Maximum DC Blocking Voltage VDC 50 100 200 400 600 800 1000 Volts Maximum Average Forward Rectified Output Current, at TC=55℃(Note1,2) Peak Forward Surge Current 8.3ms single half sine-wave superimposed on rated load (JEDEC Method) Rating for Fusing(t<8.3ms) Maximum Instantaneous Forward Voltage at 5.0A TA=25℃ Maximum DC Reverse Current at rated DC blocking voltage TA=100℃ I(AV) 25 Amps IFSM 300 Amps I2 T VF 373 1.1 10 1.0 A2S Volts µAmps mAmps 2500 VAC IR Isolation Voltage from case to lugs VISO Typical Thermal Resistance (Note 1,2) RθJC 2.0 ℃/W TJ -55 to +150 ℃ TSTG -55 to +150 ℃ Operating Temperature Range Storage Temperature Range NOTES: 1. Unit mounted on 5”×6”×4.9”(12.8×15.2×12.4mm) Al. finned plate. 2. Bolt down on heat-sink with silicone thermal compound between bridge and mounting surface for maximum heat transfer efficiency with #10 screw. 3. Suffix “W” designates Wire Lead Web Site: WWW.PS-PFS.COM MASTER INSTRUMENT CORPORATION MB2505W THRU MB2510W KBPC25005W THRU KBPC2510W Web Site: WWW.PS-PFS.COM VOLTAGE RANGE 50 to 1000 Volts CURRENT 25 Amperes